Climate change is the modern society?s common issue. The developed countries areconsuming more than what is sustainable, and the climate change due to the use offossil fuels can be seen clearly. EU has specified goals, in order to stop furtherdamage, which demand that every member state have to reduce its energyconsumption by 20 % before 2020 and 50 % before 2050, relative to 1995.The Swedish government uses a number of instruments to encourage reduction in theusage of energy, but every individual has to contribute to reach the goals.With increasing energy price the cost of living is going up. A lot of people are lookingfor ways to save energy and not be affected as much by the increasing price.Investments for insulation, replacement of windows and replacing old heating systemfor a new efficient heat pump is getting more and more common.This thesis is about investigating the possibilities in becoming independent from buyingenergy for households.

The European Council agreed in 2008 on a climate and energy package to combat global warming. This package is valid for each EU member country and means that greenhouse gas emissions must fall by at least 20% and the EU's energy use to 20%, consisting of Renewable Energy in 2020. The Swedish Government has set stringent climate and energy with the intention to set an example for the rest of Europe. For example, renewable energy sources account for at least 50% of energy use and our climate emissions to fall by 40% by 2020. A combination of these goals and a steadily rising oil price has led to an increased demand for wood fuel in the form of such branches and tops.

These studies are done in behalf of Saab AB AVITRONICS in Järfälla in the form of a thesis atthe Royal Institute of Technology in Stockholm.The task was to examine the parameters that plays a role in the construction of modern radomesoperating in broadband applications.This was interesting for Saab to get an indication of which way they should go at the newdevelopment of radomes for the next generation of equipment for electronic warfare.After a thorough analysis of the influencing parameters, a optimization application was made toget a automated way to get a radome design by specifying data on the radome size, airloads,materials, etc.This is to minimise the time of the laborious work that radome development.inply.This was solved by letting ANSYS calculate the strength of the radome structure and MATLABcalculate electromagnetic data and cost models of different sizes and materials.All these parameters woven together with the optimization tool modeFrontier picks data from therespective program and perform an optimization algorithm and then iterate a step and sends thisdata to calculation programs for the new input data. In the end, we have received a convergedpoint with our optimal solution.For the presumptions and limitations for which applied for this thesis, the result was prettyintuitive. That is to say that the smaller radome - the less materal is needed and lowermanufacturing costs results in the cheapest solution possible. The reality is not so simple. Whereyou have to take more of the electrical details such as the effect on the transmitter as a majorfactor..

When different type of programs are developed one wants to make these adjustable to future changes and requirements. It must be done a good design of the program from the beginning to make it possible to continue development of it without having to redo big parts of it to high costs. In the area of object orientation there are design pattern, which can be used to design systems that can be adjusted to new changes in an easier way. I have in this thesis chosen to take a closer look at how to design a program that sends SMS to cell phones through a system of an operator. One requirement on the program is that it has to be possible to change what operator to send though in an easy way.

In today's society, the availability of energy plays an integral part in our everyday lives. Unfortunately, the price of energy in Sweden has increased in recent decades. A large part of our energy consumption goes to heating modules for houses, where heating methods that depend on energy sources such as electricity, district heating, fuel oil, gas and biofuels are the most common ones. During the winter period, the increase in energy costs becomes significantly evident, especially for small property owners. This increase in energy cost is most noticeable for home owners with electric heating.This thesis is written at the Halmstad University, in cooperation with a company, which makes parts of this thesis confidential.

The concept of large paintings includes panoramas, cycloramas and other paintings thatin size exceeds the normal magnitude of wall hung paintings. When these large paintingsare mounted in the ceiling, they are referred to as plafonds. When they are performedon canvas, certain kinds of structural distortions and stress occurs. In addition, becauseof their size and mounting high up in the ceiling, plafond paintings are often difficult tohandle, which leads to less or no maintenance. A plafond may therefore be left withoutattendance for many decades.This thesis has its focus on what happens with plafond paintings on canvas when they areexposed to gravitational forces, and the problems involved in restoring large paintingsmounted in the ceiling.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

Abstract: The purpose of this thesis is to study the importance of having a website for traditional service companies as well as the factors that might influence its importance. This is done by answering three research questions that all contribute to the answer of the main purpose. A qualitative study has been performed including eight interviews with respondents from eight different service companies presenting four different types of businesses. The empirical findings of the study are analyzed with the help of the theoretical frame of references in order to identify the most interesting conclusions. The results of the thesis state that the main purpose of the website among the studied companies is to rationalize and save costs.

Bakgrunden till detta arbete har varit att, på uppdrag av Green Cargo Road&Logistics, finna möjligheter att sänka kapitalbindningen vid Goodyears nordenlager i Norrköping. Lageromsättningshastigheten är i nuläget inte tillfredställande och även en generell minskning av lagernivåerna är önskvärd. En nulägesanalys har genomförts medelst intervjuer och studiebesök. Därefter har en grundlig litteraturstudie och en detaljstudie av ett urval artiklar i lagersystemet utförts. Utifrån dessa båda studier samt utförd problemanalys rekommenderas ett antal förslag på förbättringsåtgärder.

Background: The increasing competition on the market demand both companies and supply chains to find optimal solutions. The edeavour to reduce inventory levels is a part of this. Earlier, inventory was seen upon as valuable assets, but today they tend to be more and more negative in the eyes of the companies. Inventory demands capital, handling, and space. Therefore inventory creates unnecessary costs.

Syfte: Studiens syfte är att undersöka ?venture capital?-branschen och hur omfattande problemen med asymmetrisk information och ?moral hazard? är samt hur risk hanteras. Syftet är också att arbeta fram en hypotes för framtida kvantitativ forskning. Ansats/metod: Med en deduktiv ansats har en kvalitativ studie genomförts. Datainsamling av empirisk primärdata har skett genom semi-strukturerade intervjuer. Teoretisk referensram: Det teoretiska kapitlet tar upp grundläggande teorier kring asymmetrisk information, ?moral hazard?, ?agency costs? och riskhantering.

This study was made in collaboration between Umeå University and Västerbotten sportsfederation. The study was aimed to find out how the municipalities are working with variousissues in the sports field. A subject of interest for this study was to see if the municipalitieswere implementing strategies in the sports field on determined goals by using policydocuments. Our study focused mostly on kids and youth that participate in organized sports inVästerbotten. Other aspects of interest in the study were economics in sports, how youthsports should be organized, and segregation in sports due to financial factors.

This project is implemented as a thesis at the Royal Institute of Technology in the master?s degree program Integrated Product Design and Industrial Design Engineering. The project has involved development and efficiency of a free starter package for expectant parents with useful content consisting of useful products for both before and after childbirth. Areas that have been investigated include packaging development, service design and appropriate content for the package.During the work, theory about packaging design, materials, manufacturing techniques and logistics have been processed to base the further work on. The project process has involved competitor analysis and interviews with store owners and customer surveys, that have been conducted to identify areas for improvement of the current solution.

AbstractThe purpose of this minor thesis is to describe and systematize the Swedish debate about Sweden?s participation in the defence community of the European Union. Should Sweden take part of this or not? My aim is to describe the debate in a structured and legible way, so that the reader can get a comprehensive picture. The questions of the study are:· Which actors join in the Swedish debate about Sweden?s military participation in the EU:s defensive community; the possible common defence of the EU and the EU:s military crisis management?· Which arguments are delivered (for and against) in the debate?To be able to fulfil the aim of this study I have done an argumentation analysis.

Background: Postoperative infections are a serious patient safety problem and affects about 3 % of all patients undergoing surgery. The consequences are prolonged hospital stays, high social costs, increased use of antibiotics and impaired quality of life for the patient. It has been shown that postoperative infections may be caused by contamination already in the operating room. Today we know that there is growth of microorganisms on the instrument table´s top, but there is a research gap about the instrument table's edges.Aim: To examine if the sterile drape on the instrument table´s edges are sterile after finished surgery.Method: Contact plates are printed on strategically selected areas on the sterile drapes top and edges. In the pilot study, a total of 51 cultures were taken at the end of three operations which lasted over three hours.Results: Growth on the top surface and the edges of the sterile drape were detected.