Försvarets materielverk (FMV) står inför en omfattande ominriktning av verksamheten med tillhörande omorganisation. Den nya verksamheten innefattar att leverera tjänsten försvarslogistik till Försvarsmakten (FM). Då det inte finns någon entydig definition för vad försvarslogistik är så har detta arbete inriktats att utarbeta ett förslag till en sådan definition. Dessutom har en procedur skapats som identifierar relevanta prestandamått för ett godtyckligt försvarslogistiskt system, s.k. Key Performance Indicators (KPI), som kan användas för att påvisa om försvarslogistiken är effektiv eller inte.

Nynas produces bitumen at two refineries in Sweden. The bitumen is shipped to seven depots along the swedish coast line, and from the depots special trucks handle the transportation to customers. Recently Nynas has transformed its supply chain and closed down a few depots. At the moment the company is considering a further reduction of the number of depots. In connection to these discussions an analyse of the companys distributionsystem and of possible changes is required.

Today, maintenance is a big part of the daily life on board ships. It is also one of the bigger expenses a shipping company has and without any loss of quality tries to run as economically advantageous as possible. In the hunt for economical savings the shore-based industry has subsequently applied the use of condition based maintenance, CBM, were a component is maintained according to its actual state. This leads to a reduction of maintenance costs since no parts are unnecessarily replaced. However, within the maritime sector a periodical maintenance is still the most commonly used maintenance system.The purpose of this paper is to chart the factors that are the reason for the low implementation of CBM on board the Swedish merchant fleet's ships.

BackgroundToday a common approach to solve a complicated problem is to assemble a temporary workforce in order to solve the problem by working together within a project. One of the difficulties with working in projects is to maintain the planned budget. Working hours and costs are often exceeded. Many companies presume that any certain project will succeed, a presumption that leads companies not to anticipate risks involved in a project. In companies today there is seldom time for evaluation or moderation of a project, in order to have time for evaluation there is a great need for an adequate planning of the project.IntentThe intention with this study is to create a model for planning, budgeting and evaluation of projects within consultancy companies.MethodWith the help of interviews and discussions within the group Hamnar och Byggkonstruktioner at Sweco has evidence to present a proposal on planning, budgeting and monitoring been developed.ResultsA model has been developed to ease for consultancy companies to plan, budget, monitor and evaluate projects.

Textil- och konfektionsindustrin blir alltmer globaliserad och ställs inför hårdare krav då konsumenterna efterfrågar allt billigare varor i snabb förändring. Sedan flera decennier har europeiska konfektionsföretag flyttat sin tillverkning till länder med lägre arbetskostnader för att uppfylla kraven om låga priser som europiska tillverkare har svårt att uppfylla. En stor del har flyttats till Kina men även till andra länder i Asien. Nu håller marknadsförhållandena på att förändras igen genom tillväxt- och utvecklingsländernas starka utveckling. Förändringarna syns tydligast på Kinas marknad genom stigande priser och mindre kapacitet för europeisk produktion.

This thesis has been made on behalf of Forsmarks Kraftgrupp AB and is the final part of the education of Bachelor of Engineering in ? Innovation, production and logistics atMälardalens Högskola.Forsmark nuclear power plant is located in Östhammars municipality at the coast of Uppland. The three nuclear reactors in Forsmark together produces approximately one-sixth of Sweden?s electricity consumption each year.The background of this study is that a large number of requests come to the purchasing department with incomplete information. Usually it is in the description of what is to be acquired as the information is incomplete, but also in knowing when Quality Control-functions (QC) is supposed to be used.The aim of this work is to describe and analyse the material acquisition process.

This thesis has been performed as a part of the Bachelor degree in Industrial Engineering and Management at the School of Engineering in Jönköping. The thesis is written on behalf of Pallco AB, which is an engineering company that performs subcontracting, surface treatment, and assembly of components, mainly in steel and aluminium. The thesis focuses on identifying and analyzing the customer order fulfillment process of three customers at Pallco AB.The main objective of the thesis is to distinguish time differences in the company?s administrative work for each of the three customers. Furthermore, Lean thinking is following as a thread through the whole thesis.

The purpose of this study is to compare the economic differences between withdraw of forest fuel and withdraw of pulpwood in first thinning, to see which method gives the maximum profitability (income - cost). Another purpose is to investigate the economic impact of the thicket cleaning. The study compares four different methods: i) pulpwood output with thicket cleaning, ii) pulpwood output without thicket cleaning, iii) forest fuel output with thicket cleaning and iv) forest fuel output without thicket cleaning. The study was conducted in a 30-years old stand, dominated by spruce, outside Harg in Uppland. The method that generated the best economic net income was pulpwood without thicket cleaning. It generated a positive net of 1,383 SEK per hectare. Forest fuel output without thicket cleaning also generated a positive net in 720 kronor per hectare.

BackgroundToday a common approach to solve a complicated problem is to assemble a temporary workforce in order to solve the problem by working together within a project. One of the difficulties with working in projects is to maintain the planned budget. Working hours and costs are often exceeded. Many companies presume that any certain project will succeed, a presumption that leads companies not to anticipate risks involved in a project. In companies today there is seldom time for evaluation or moderation of a project, in order to have time for evaluation there is a great need for an adequate planning of the project.IntentThe intention with this study is to create a model for planning, budgeting and evaluation of projects within consultancy companies.MethodWith the help of interviews and discussions within the group Hamnar och Byggkonstruktioner at Sweco has evidence to present a proposal on planning, budgeting and monitoring been developed.ResultsA model has been developed to ease for consultancy companies to plan, budget, monitor and evaluate projects.

BACKGROUND: A Pressure ulcer means much suffering for many people. It also leads to big economical costs for the society. Therefore it?s of great importance to prevent pressure ulcers. If pressure ulcers are to be prevented nurses need to have sufficient knowledge about preventive strategies.

From January 1st 2011 the use of Eurocode will be mandatory for all constructionprojects. Eurocode is the common European set of struc-tural design codes which willreplace BKR (Boverkets Kon-struktionsregler). BKR is the Swedish set of structuraldesign codes that was used up until December 31 2010. For consulting firms this willcre-ate a need for them to invest in the standards and in education for thecoworkers. This will involve both time and costs for the company.The purpose and aim of this master thesis is the development of compute examplesand calculations aid by dimensioning with Euro-code.

During the last couple of years it has been more important to reduce the driving on the field to prepair the soil after ploughing. The machine costs are high so it is necessary to be effective. To reach a pleasant soilbed directly after ploughing is sometimes possible on easier soils but heavier clay soils always need more tillages. There is a lot of equipment mounted on the ploughs on the market, for example Furrow Cracker and Furrow presses, which makes a pleasant soilbed on easier soils. The last year Överum and Kverneland have presented knives which are mounted on the wing or moulboard.

I denna studie testas tio hypoteser som relaterar till finansiell teori för att se hur väl teorin kan förklara skuldsättningsgraden i små börsnoterade bolag. De teorier som testas är avvägningsteorin (trade-off theory), hackordningsteorin (pecking order theory) samt teorier relaterade till asymmetrisk information och agentkostnader. Testen genomförs med multipel linjär regressionsanalys och de undersökta bolagen är samtliga bolag med färre än 200 anställda på tre av de mindre börslistorna i Sverige. Resultatet visar stöd för åtta av de tio undersökta hypoteserna och är i flera avseenden tydligare än i tidigare studier som testar onoterade små bolag eller ett bredare urval av bolag..

This report is on concrete work during the winter and is implemented on Peab?s behalf. The assignment was to describe the differences between a summer- and a winter casting. While it shows the complications that exists, it also show what aids are available, both electronic via computer and physical aids.The information that I have developed is originally from theory in books, information on the internet as well as practical experience from knowledgeable people that works in construction output. Other theories are those I have learned throughout the education to become a construction engineer, including all oral sources over the years.The results I have come up with, I hope will be able to help future construction projects in the planning phase of a winter casting.

Examensarbete beskriver hur ett analysverktyg har skapats för materialförbrukningen på Motorunderhållsavdelningen på Volvo Aero Corporation. Analysverktyget tar fram snittlistor och inköpslistor till motorn PW100. Dokumentering vid skapandet av analysverktyget sker i sju delar.Genom att skapa ett analysverktyg kan de strategiska materialplanerarna på Volvo Aero lätt generera en snittlista eller en inköpslista som baseras på historisk data. Tidigare var de strategiska materialplanerana tvungna att beräkna snittlistor manuellt och mycket handpåläggning gjorde att resultatet inte alltid var pålitligt.En förstudie gjordes för att få en bättre inblick i den nuvarande organisationen och hur arbetet styrs på motorunderhållsavdelningen på Volvo Aero. Intervjuer utfördes löpande samtidigt som en litteraturstudie inom området logistik gjordes.