The aim of this thesis is benchmarking of the program, based on dynamic programming, that earlier was written to imitate the production planning at TSS.This thesis starts with a chapter about the construction of the DP-program, a shorter description of one and each of the program parts and also a list over the in- and output data in each program part. The DP-program consists of six linked MATLAB-files that together produce an optimized production plan for the different planning groups at TSS. The program reads in and reformat the given data and optimize the production of the articles in one group. Finally it compounds all article production plans and give us a production alternative.After running the program with new data the result shows, resembling with previous results, that TSS could be able to make some distinct cost-savings. According to the program, a 50 % decrease of TSS production costs is possible. .

Energy awareness is growing among the Swedish population and a one­?to­?two-family dwelling can save energy. The purpose of this paper is to design a tool that helps these home owners reduce their energy costs.The paper develops a model that gives them an indication of how much energy they can save. For the majority of homeowners, the next step in the quest to reduce theirs is most likely an energy audit. Therefore, information to help home owners to get a good energy audit performed is included in the model.A prototype running the operating system iOS is created and validated against existing models, as well as an energy audit. .

This thesis was conducted at Mälardalen University in Västerås and Härjeåns Nät AB, mainly in Sveg. Härjeåns Nät AB is a network company that delivers electricity in Härjedalen municipality, Ånge Municipality, Ragunda and Bräcke municipality. The maintenance and dismantling of electricity and broadband networks generates a lot of waste. The purpose of this work is to present proposals on the management of the waste. The goal is that all of Härjeåns offices should have equal management for the waste and an overview of how to manage the various wastes.

Försvarsmaktens sjukvårdsorganisation var under det kalla kriget och invasionsförsvarets dagar anpassad och dimensionerad för att kunna omhänderta tusentals skadade per dygn. Sedan 1990-talet har Försvarsmaktens inriktning fokuserat på internationella insatser. I kombination med förändringar inom det medicinska området, hotbilder, skadepanorama och folkopinionen har detta lett till nya förmågor inom den militära sjukvården. Sedan en tid har Försvarsmaktens inriktning ändrats till ett mer nationellt fokus. Vad har då hänt med sjukvårdsförmågorna? Denna uppsats använder sig av Moshe Kress teorier presenterade i boken ?Operational Logistics - The Art and Science of Sustaining Military Operations? för att göra en analys av de förmågor Försvarsmaktens insatsorganisation har idag.

In this paper we have studied possible future uses for Additive Manufacturing (commonly referred to as 3D-printing) in Space. More specifically we have sought to establish how Additive Manufacturing can be used to construct structures on the Moon. Our studies have shown that Additive Manufacturing has great potential for establishing colonies on not only the Moon, but perhaps even further away from our home planet. With Contour Crafting-technology in combination with ISRU (In Situ Resource Utilization) we could, with material already present in the sediment layers of the Moon, construct advanced structures without having to transfer any extra material from Earth. This would lower the costs of establishing a colony on the Moon to such extents that it could actually be fiscally possible..

This Master thesis was written for Lantmännen Agroetanol in Norrköping concerning the layout of their finished goods inventory and unloading of feed after introducing a new product mix. Lantmännen Agroetanol has two production lines which produces feed. Both lines lead to six silos, used as inventory of finished goods. The feed from the two production lines differ in terms of quality, where as Lantmännen Agroetanol wants to separate their finished inventory in order to charge a higher price, by selling the better product as a premium. With two different feed products the yearly revenue is expected to increase which motivates a research about the current capabilities and necessary changes to be made in the factory.

Den nya globala försvarsmakten ställer nya krav, inte minst på logistikkedjan där avstånden ökar och förutsättningarna för insats inte är lika klara som under det kalla kriget. Syftet med uppsatsen är att undersöka vilka krav ur en doktrinär synvinkel som kan komma att ställas på logistikkedjan på strategisk nivå kopplat till en strategisk rörlighet vid en framtida Svensk insats. Som empiri i uppsatsen används de doktriner och reglementen som finns i Sverige och i NATO som avhandlar logistikkedjan på strategisk nivå och strategisk rörlighet. Samt en fallstudie från Operation Iraqi freedom för att exemplifiera de krav som kan komma att ställas på logistikkedjan på strategisk nivå. Uppsatsens metod är deskription och fallstudie där fallstudien exemplifierar de problem som kan komma att uppstå.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

This report is intended to give an insight in the Network Performance Assessment Modeland the parameters that is needed in the making of a fictitious grid that represents anoptimal grid. A main goal is to investigate how the construction of a real grid iscompared to the fictitious.One of the key parameters is how redundancy is treated in the model and to find theoptimal amount of redundancy versus the costs. Further is the dimensioning of the grid ofinterest. The fictitious grid is based on energy whereas the real grid often is based onsubscribed power and these two principles are compared and analyzed.The difference in the outcome of the model result due to variations in input data of themodel is also discussed in the report..

To be a farmer and have suckler cows is a difficult combination especially considering the economy. Because of the increased feed costs, the margins have become tighter. The meat price from beef cattle has increased a little when this text is written (spring, 2008), but not so much that it covers the cost for feed etc. I have a small suckler cow production on approximately 30 cows and 2 bulls plus followers as a part-time business. The herd is tied in the old dairy stable built in the late seventies.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

Efter avregleringen av lagarna under 1990-talet öppnas marknaden med uthyrning av personal. Bemanningsföretag anställer arbetstagare som därefter hyrs ut till kundföretag som strävar efter högre flexibilitet i schemaläggningen av arbete. Finns det ingen efterfrågan av arbete blir dessa anställda utan sysselsättning trots att de har anställning i ett bemanningsföretag. Syftet är att beskriva och förklara arbetsledarnas uppfattning om inhyrd personal respektive fast anställda vad gäller arbetsförhållanden och relationen till arbetsledaren. Uppsatsen är utförd som en flerfallsstudie byggd på intervjuer med arbetsledare i företagen Coca-Cola Drycker Sverige AB, Posten Logistik AB, Schenker Logistics AB och Spendrups Bryggeri AB.

By today?s date there are a lot of companies that are in great need of restructuring their paperwork in a more organized way. This can be excellent arranged with the help of properly constructed computer software. The aviation industry is no exception, but actually a good example of this. Täby Air Maintenance (TAM) is a company which is situated in Örebro.

Revenue is the largest post in the financial statements but is often least described. They are an important element when different companies are compared with each other. Revenue is often associated with assessment which Enron and Prosolvia is two examples of. Enron reported their incomes and assets while their costs and debts were not reported. Thus were a positive image maintained of the company when the financial position in reality were otherwise.

Biogas is a renewable energy source that is produced by anaerobic digestion of organic mate-rial. In Sweden, biogas predominately comes from sewage water sludge and landfills or from organic waste of households and industries. Small scale digestion plants at farms are espe-cially expected to contribute to increased biogas production in the future. Biogas can be ob-tained directly in it?s raw form and used as fuel in a combustion chamber.