Each year, the coffee machines at Ericsson in Kista produce around 100 tons of ground coffee waste.The companies Coor Service Management, Löfbergs Lila and Selecta are all responsible for differentstages in the logistical chain in delivering coffee and, together with Ericsson, they want to increasetheir environmental benefit. The plan is to produce biogas through anaerobic digestion instead ofincinerating the coffee waste in a heating plant. The results are to be presented as different businesscases in which different biogas plants are compared with the reference case (heating plant),comparing costs and environmental impacts.There are two major environmental benefits from producing biogas; reduced carbon dioxideemissions from when fossile fule is replaced by carbon neutral biogas, and reduced emissions fromreturning digestate from the bio reactor to farmland instead of using industrial fertelizer.In order to determine the biogas potential in coffee waste, a couple of properties had to bedetermined in a laboratory. Properties such as the dry substance content, heating value, moisturecontent and ash content. The results show that 100 tons coffee waste could produce around 16 500Nm3 biogas which would contain 163 MWh.The biogas reactor and upgrade plant both need energy gas to function and uses around 14 MWh ofthe produced gas.

Theft without break-ins has increased significantly in the last year of swimming, sports and leisure facilities in Karlskrona, more precisely 60%. Vandalism in the shape of graffiti is another common crime. The solutions are divided into social and situational crime prevention. Social crime prevention engage in actions that are based on social causes of crime rather than the opposite situational crime prevention, which instead assumes that discourage with the help of technical solutions and has as primary objective to hinder accessibility for example theft friendly goods. The main purpose of this work is to come up with solutions to prevent these crimes, while also being cost-effective and realistic to implement. The work is important in that it creates safety awareness and promotes a healthy safety culture. Moreover, the future goal is to lower these statistics. The goal of the work is in addition to developing our knowledge of crime subject, was also to provide help and solutions for our clients.

Den här uppsatsen är skriven på uppdrag av GrenseTjänsten Morukulien, vilken är en organisation som hjälper personer, företag och andra organisationer som har ärenden i både Sverige och Norge.Syftet med uppsatsen är att jämföra levnadskostnaderna för en tvåbarnsfamilj i Arvika- och Kongsvinger Kommun. Detta görs genom att se vilken familj som har störst köpkraft. Med köpkraft menas hur mycket man kan konsumera för sin disponibla inkomst.Levnadskostnaderna jämförs för en genomsnittlig tvåbarnsfamilj. Undersökningen bygger på att alla kostnader läggs i boendelandet. Vidare utgås det ifrån att båda familjerna har samma konsumtionsbeteende som en genomsnittlig svensk tvåbarnsfamilj med jämförbar inkomst.

This study was carried out as a commission from Holmen Skog, district ?Egen skog? in Norrköping. During October 2006 several stands were inventoried by aerial photos from helicopter. The stands were those for which the next action proposed was plant inventory or plant check. The photos were interpreted and the number of stems was calculated.

Background: Oil is the most dominating source of energy of today, it constitutes for more than 40 per cent of the worlds total energy consumption. This together with the fact that stock in oil companies has soared on the stock exchanges around the world makes oil a very interesting topic to write within. In order to gain knowledge in how to value oil companies, the authors will collect information from theory and through a questionnaire. By applying the information gathered to three companies listed on the Stockholm Stock Exchange the authors will reach an objective picture of valuation of oil companies.Purpose: To investigate how shares of stock are valuated in the oil exploring and producing industry, and what specific measures and metrics that are used in the valuation of stocks in Exploring and Producing (E&P) companies.Method: By using a qualitative approach for this thesis, the authors will investigate how the valuation of oil companies works and what measures that should be applied. The authors will use a part descriptive and part explorative study.

Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.

During the past few years an increased attention has been paid to environmental issues in the construction and property sector in Sweden. In order to simplify the work with these issues a Swedish environmental certification system for buildings called Miljöbyggnad has been developed. This thesis aims to investigate the opinion of a selected number of selected property owners of Miljöbyggnad. From that basis recommendations and actions for the future work with the system will be presented.The investigation has been conducted through personal interviews with five property owners. The main issues that the interviews have been based on are their purpose, experiences, perceived complications and future prospects in terms of certification using Miljöbyggnad.The system intends to be cost-effective, simple and to offer a relevant environmental assessment of buildings and the result from the report indicates that this is largely fulfilled.

A Swedish electronics company wants to make the cooling of one of their electronic components more efficient. They propose that a retrofit liquid cooler is the way to achieve this goal. The current air cooling has high energy cost due to the high amount of power needed to power fans and heat exchangers. Using high volumes of air for cooling also leads to noise pollution. The conversion from air to liquid cooling would possibly make the operation of the electronics more cost efficient and less noisy.The purpose of this project is to theoretically evaluate different concepts of drawing the heat generated by the electronic component in to a fluid, using numerical calculations in Matlab and FEM simulations in ANSYS.

Den här rapporten behandlar ett system som använder en databas som lagringsplats för loggar. En bra metod för att hämta ut dessa loggar saknades och databasdesignen behövde förbättras för sökningar i loggarna. En applikation för att hämta och söka i loggposter från databasen skapades. En undersökning om hur databasdesignen kunde förbättras genomfördes också. Båda delarna gjordes i ett projekt för att de hörde ihop.

Membrane bioreactors (MBR) combined with biological phosphorous treatment (Bio-P) has been investigated if that could be an alternative to the future expansion with conventional active sludge treatment at Lundåkra wastewater treatment plant (WWTP) in the proximity of Landskrona, Sweden.The results showed that the surface demand in the biological treatment will be reduced with 67% with the MBR-alternative compared to a conventional activated sludge process. The nutrient removal in the MBR-solution was decreased or unchanged for nitrogen-, phosphorous- and organic parameters. However, the energy demand will increase with an estimated cost of approximately 1 million SEK annually. Moreover, the extra chemical consumption is estimated to cost 370 000 SEK annually.The disturbances caused by filamentous bacteria such as sludge dispersal could be resolved with MBR-technology because the membranes are not affected by these organisms. The Bio-P process combined with MBR-technology works if the wastewater recirculates from the membranes to an aerobic zone.In the proposal, there will be a new pre-treatment step, for instance hole screens.

Logistics planning for a construction site is usually limited by traffic flow to and from the workplace. The geographical location of the construction site is determined by roads around the workplace and opportunities for well-functioning logistics. Inventory of material is often impossible because of the frequently small workspaces. As a result, a concern relating material handling remains . Even before the establishment of a construction site, it is required in the construction industry to eliminate errors that might arise in the planning stage.

In 2013 a new emission standard for heavy trucks was introduced and hence a number of new parts was brought in to Scania CV AB. This created a need for modifications in the silencers flow. The flow is highly complex involving several suppliers, call off methods and different models of silencers. The aim for this project was to improve the existing silencers flow. The flow, from supplier to assembling, has therefore been mapped.

AbstractBuilding Information Model/Modeling/Management (BIM) is a tool that allows for efficient working methods. BIM saves time and money while providing the potential for visualization. This method of working is based on a 3D-model, and then a fourth and fifth dimension are connected. 5D modeling means that a spreadsheet creates cost estimates based on the 3D model. This provides opportunities to carry out calculations in the early stages of the projects. Calculations are currently performed manually and do not contribute to the development that the construction industry requires.

Quality can be defined as the ability of a business to satisfy their customers? needs and expectations. Total Quality Management is defined as the way to prevent, appraise and improve the entire organization to increase the product quality. In order to systematically increase quality in an organization, there are different quality systems in use. One example is process management, which is to divide the activities of processes.

As a company it is required to work with strategies to minimize costs such as packaging and logistic costs. The increased market of industrial produced wooden buildings results that the time and the cost which the packaging of prefabricated building elements consume, is experienced to be in greater need of development than before and demands a better solution. The aim with this dissertation was to discover how the development of the handling of the packaging can improve the packaging process. The goal was to present improvement proposals for a simplified and thereby a more efficient production in time and cost perspective.The packaging process which includes packaging, handling, storage and transport were studied. Interviews were made with participants from the market for manufacturers of wooden houses and a case study was made at the company A-hus.