This study deals with the technical and economic feasibility of replacing the nuclear power plant reactor Ringhals 3 with a biofuel power plant. A technical investigation has been executed to determine which of the systems and components that could be reused and which ones would need to be replaced. The investment costs of the reconstruction have also been estimated. The cost of the electricity production has been calculated as well as the emissions of the new biofuel power plant. Based on the established rate of return, the lowest average spot price of electricity that makes the investment profitable has been calculated.

Recently, retailers within the Swedish grocery retail sector have launched lines of products under its own brand, quite often produced by manufactures within the same category of products. The common term of this phenomenon is called private labels. Therefore, private labels could be seen as competitors against branded goods, despite the fact that it is, in several cases, the same manufacturer who produces each of the products.The main purpose of this study is to provide understanding of how the manufacturers choose to position themselves, formulate their strategies and compete on the market among private labels, also to examine the motive behind the manufacturer's choice to produce private labels. The study intends to provide a broader view of how the interaction between manufacturers, retailers, private labels and branded goods appears on the Swedish market. We decided to use a qualitative research method and personal interviews to approach the study.

For the sender of television advertising, it is important to utilize content that gives effect, especially to get the receiver?s attention and then maintain it (Hägg, 1998). What is the content of a commercial that creates effect? Previous research focused on the impact that commercials have on the receivers. A discussion of which content that produced effect in commercials does not occur.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

This discursive policy study has its starting point in the criticism of the Swedish gender-equality policy is depoliticised. The purpose of this study is to investigate how the Swedish gender-equality policy was problematised and designed during the 2000s. The purpose of this paper is also to investigate whether the Swedish gender-equality policy can be defined as a depoliticised policy or not. The research questions of this study are: What´s the problem of gender-equality represented to be in the specifics policies and what effects are produced of this representation? Can gender policy, as it is designed in the various policy documents, be understood as a depoliticised policy, in the sense that sex is not articulated on the basis of a conflict dimension?To find the answer of theese questions I use the method ?Whats´s the problem represented to be", which is an inductive approach where the researcher sets selected questions to its material.

This report describes the development of a high-voltage connector at the request of Scandinova Systems AB in Uppsala. The development process is described from the making of a customer demand specification, to the making of drawings for the manufacturing of prototypes. Scandinova develops high-voltage modulators, hence the need for connectors that can handle very large power pulses. Their current connector has several weaknesses that may cause the connector to melt or catch fire. The development began with a number of studies that included the modulator structure and the current connector structure and functions.

Domestic weekly magazines in Sweden are characterized by an emphasis on practical editorial material such as cooking recipes and knitting patterns, and also contain a comparatively large share of reader material. This makes it possible to study the readers through texts produced by themselves. The aim of this study of columns of readers' tips on domestic work is to analyze how readers embody a specific femininity centered around the woman as responsible for the home, in the sense of everyday maintenance as well as aesthetic development. The author defines this femininity as "home maker". The theoretical framework for the analysis is the sociological theory of Pierre Bourdieu, and Jonathan Potter's and Margaret Wetherell's model of interpretive repertoire is also used where modality is discussed.

Today almost every artist has a music video. With today?s technology it has become a lot easier for smaller companies or amateur filmers to produce and distribute their work. But how important is an artist?s music video and where do people find their music these days? Other questions we wanted to answer were if there is a typical way a music video looks like based on its genre.

Aim of the thesis: The aim of this thesis is to describe and gain a deeper understanding of how companies use communication as a tool to overcome the gap between the company and the consumer. The aim is also to clarify some of the factors contributing to this gap.Method:  This thesis has been made from a qualitative approach with quantitative influences. The qualitative primary data collection was gathered through six in-depth interviews with companies in Gothenburg either selling organic and fair-trade produced clothes or marketing towards sustainable consumption. The quantitative part consists of a consumer questionnaire given to 100 women in the inner city of Gothenburg.  Frame of references: Related researches within the field of the subject are presented in the beginning of this chapter. Further theories presented are the consumer?s awareness and the consumer´s responsiveness to CSR.

The payment for produced grain is constantly going down in price. It is important for farmers to become more effective in cultivating more land in a shorter time perspective. At the same time we have to calculate with the risk of getting lowered subsidies from the EU. This is why I would like to find out the possibilities for establishing winter wheat without ploughing. I hope to find a difference in the number of plants due to different soil preparations. With this experiment I expect to find out whether I can establish winter wheat at a lower cost, with the same numbers of plants per square meter.

A recent development in the field of accounting has been an increasing use of fair values in financial reporting. In 2005, this development was reinforced in Sweden by the adoption of the International Financial Reporting Standards. The aim of this thesis is to discuss the problems related to the use of fair values, through a case study of the Swedish investment bank Carnegie. In May 2007, Carnegie announced that the result had been overly stated by 630 MSEK, due to the valuation of derivatives within the trading department. The empirical material consists of documents produced in the legal process between Carnegie and the Swedish Financial Supervisory Authority.

Research in solar energy is taking big steps in both solar heating and solar electricity. It´s not only the technologies alone, but also the combination of both solar electricity and solar heating which is what is called a solar hybrid. The idea of a solar hybrid is that a solar cells efficiency decrease with increased temperature and can with help from a solar collector be cooled and the heat can be utilized. This thesis report compares heat production and electricity production with respect of, in first hand, a solar hybrids geometry in the cooler. The theory chapter describes solar heating and how different solar cell technologies work and their environmental impact at the production and how compatible these technologies are for the solar hybrid.

The research work performed in this thesis has been carried out at the Production Tech-nology Centre where the Thermal Spray research group of University West has its work-shop and labs.This research work has been performed in collaboration with the International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Hyderabad, India.First of all, I would like to express my sincere thanks and gratitude to my supervisors Dr. Nicolaie Markocsan and Dr. Nicholas Curry for their guidance, great support and valuable suggestions without which this work could not have been possible. I would also like to thanks Prof. Per Nylén for keeping faith in me and providing me an opportunity to work at PTC, which is a great place to perform research.

The purpose with this qualitative interview study was to try to describe, through a phenomenological viewpoint, the meaning that Counter-Strike players put on there contemporary world. We started to explore this Game World with field research studies on the world?s biggest Game exhibition Dreamhack in the city of Jönköping. This helped us to develop our main question for this study.The thirteen participants of the interview were selectively chosen from a Game Café in the city of Karlstad. They were interviewed with five questions that dealt with their experiences of playing Counter-Strike and their experience of time perception in their world.

The objective of this study was to make an inventory and a potential analysis of the organic beef production in the region of Gävleborg, Sweden. A survey was conducted, where a questionaire was sent to all farmers in the region who had environmental subsidies concerning organic cropping systems in 2001. In total, there were 701 farmers, of which 46 % participated in the study. Three slaughter houses were interviewed to get their pictures of the development of organic beef production. The study shows that there are potentials and interests in the region to increase the production of organic beef.