Värnamo Elnät owns and operates a ripple control system which is used to control Loadsespecially when the grid is heavily Loaded and for control of street lighting. This report aims atclarifying technical and economic aspects of the ripple control system?s future. The system wasinstalled from 1975 and onwards and its use was greater in those days when the controllableLoads where greater then today, the current controllable Load level is about 3 MW. The reporthighlights three different aspects of the ripple control system?s future ? retain the currentsystem, reinvest in a newer system or discontinue the system.In the report the author also discusses relevant connections to Smart Grids and future meteringsystems and tariffs.

The aim of this study is to examine the word acquisition, focusing on the nouns and word exercises, in two Swedish textbooks for German in the upper secondary school. The chosen method for investigating the nouns was corpus analysis. The noun frequency and distribution in the textbooks were analysed and discussed in relation to research in second language acquisition. The Involvement Load Hypothesis by Batia Laufer and Jan Hulstijn was used to examine the exercises in the textbooks. The study showed that most nouns only occurred once in the textbooks, but the most frequent nouns were well spread in the textbooks.

Detta examensarbete har genomförts på begäran av byggnadstekniska byrån i Uppsala. Företaget behöver en ny beräkningsmall med vindlastberäkning för väggar och olika taktyper enligt Eurokod.I dagsläget använder företaget en beräkningsmall som är baserad på gamla normer enligt BKR. Dessa normer kan dock inte användas längre enligt nya bestämmelser inom branschen. Enligt de nya bestämmelserna bör dessa vindlastberäkningar genomföras med hänsyn till Eurokod i framtiden.För att kunna beräkna vindlasten enligt Eurokod och effektivisera beräkningsgången har man utvecklat en beräkningsmall baserad på Eurokod. Alla nödvändiga parameterar enligt standarder har använts i beräkningsmallen och användaren tillåts genomföra en snabb och enkel inmatning av projektmått för att på ett automatiserat sätt genomföra belastningsanalysen.

Holmen Skog AB is an important supplier of conifer pulpwood to the Iggesund Paperboard mill. After logging and transport to the landing by a forwarder, the wood is Loaded on trucks for further transport, often by using separate Loaders. During this handling process considerable amounts of stone material is sometimes mixed into the pulpwood and this causes problems for the industry. The aim of this study is to identify which part of the chain from forest to pulpmill, that contributes the most to this contamination. Sizes and total volumes of the contaminating stones were also investigated.

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.

This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

Grassland is a great part of Swedish agriculture and there is a demand of what the grassland yield is in practice. To be able to control the economic of the milkproduction it is important for the farmer to know how big quantities of pasture there is to use during the year.The work is based on interviews of 22 farmers from southern part of Sweden. Their area of grassland fluctuate between 16 up to 360 hectares. The questionnaire content 32 questions.The most common way to weight the green plant material is to drive over a scale, and to measure the dry extract with your own gauge. It takes in average two minutes toweight one Load of green plant material.

The aim of this study was trough qualitative interviews with teachers and counsellors in Swedish schools, to study their experiences and perceptions of non suicidal self-injury (NSSI) in adolescents. During the study three teachers and three counsellors who worked in four different schools were conducted. The theoretical approach that was used is Michael Polanyis theory tacit knowledge. The outcome of the study was that schools did not seem to talk about NSSI as a problem and the teachers knowledge about it had come from own experiences meeting adolescents whit NSSI. The interviewed teachers and counsellors felt it hard to define NSSI, they mainly referred it to someone who cut themselves.

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.

This Thesis is performed in cooperation with Kalmar Industries in Lidhult, Sweden. Theprojects main purpose was to develop a draft design of a test equipment. The equipmentwill simulate and valuate the drive-train and brakes at Kalmar?s bigger forklifts.The equipment will be designed so the wheels of the forklift are placed on two rollers;these absorb and affect the forklifts brake- and driving force. With this characteristic anup- and downhill can be simulated.

Syftet med rapporten är att utvärdera en interaktiv brand- och räddningsinstruktion som framförallt används inom försvarsmakten. Utvärderingen gick ut på att ta reda på hur användarna använder instruktionen och hur de vill att den ska utvecklas i framtiden för att möta deras behov. Utvärderingen genomfördes genom intervjuer med sju användare från olika delar av landet samt en heuristisk utvärdering utifrån Nielsens tio användbarhetsprinciper och med hänsyn till Sweller och Chandlers ?cognitive Load theory?. Resultatet visade att instruktionen framförallt används som uppslagsbok och att användarna vill se en utveckling av instruktionen där den blir större och omfattar mer information, till exempel om haverier och utländska luftfartyg och att text och illustrationer i instruktionen är uppdaterad och korrekt.

This report describes the development of a sample Loader for my diploma work at Q-linea AB in Uppsala. The sample Loader will replace the process of Loading fluid samples into Q-linea?s instrument for biomolecule analysis. The earlier process was done by hand and was a time consuming and inefficient task.The work was initiated with a design phase where an overview of the system was created. The sample Loader will be receiving text commands from a PC that coordinates all the subsystems like pumps and lasers on the analysis instrument.

Den tekniska utvecklingen har lett till att massiva mängder av information sänds, i höga hastigheter. Detta flöde måste vi lära oss att hantera. För att maximera nyttan av de nya teknikerna och undkomma de problem som detta enorma informationsflöde bär med sig, bör interaktionskvalitet studeras. Vi måste anpassa gränssnitt efter användaren eftersom denne inte har möjlighet att anpassa sig till, och sortera i för stora informationsmängder. Vi måste utveckla system som gör människan mer effektiv vid användande av gränssnitt. För att anpassa gränssnitten efter användarens behov och begränsningar krävs kunskaper om den mänskliga kognitionen.

This thesis engages the topic of test methods for wood adhesives. Two test methods were evaluated, EN 302-1, a European standard, and ASTM D905, an American standard. The total amount of specimens manufactured and tested was more than 500. The adhesive bonds were tested in shear with an increasing Load on the specimen until failure.The adhesives used were epoxy-resin, phenol-resorcinol-formaldehyde and a 2-K polyurethane. The test programme included five different types of intentional errors per method, in order to investigate the sensitivity of the test methods.

The purpose of this report is to simplify the process of designing carbon fiber strengthening for existing concrete constructions, specifically beams. The intention has been to establish a flow chart containing information on the necessary testing and calculations for the design, to as far degree it is possible satisfy the requirements stipulated by Swedish and by extension, European authorities.To do this the report will examine a parking garage situated underground by Akademiska Sjukhuset, Uppsala. The parking garage was built in the mid-seventies, and has in recent years been subjected to a greater Load than designed for by the construction of a road on top of it. FEM-Design has been used to obtain the internalforces of the beams and thereby determine whether they are in need of strengthening or not and thereafter design the strengthening according to Täljsten (2006) with some corrections from Täljsten (2011) due to new regulations.The result of this report is that the flow chart used is viable to design carbon fiber strengthening, atleast with the conditions met in our reference project.The conclusion drawn after working with this report is that there is a need for a clear standard for carbon fiber strengthening , preferably a standard that can be used throughout Europe..