Svensk Växtkraft is the owner of the biogas plant in Västerås. The company is planning to increase their treatment capacity at their biogas plant. In connection to this work it is also possible to make some energy saving changes to the biogas plant. The objective of this study was therefore to make an electricity and heat survey of the biogas plant, a detailed study of the heat consumption in the sanitation step and also a comparison of energy consumption with the present sanitation method and an alternative strategy where the waste is treated in 55 °C during 10 hours (the current method is heating to 70 °C during 1 hour). The energy survey was conducted in close collaboration with staff at the biogas plant. The current during normal operation was measured, power was calculated and multiplied by the time of usage to obtain the energy consumed.

In the end of the 80´s the area of system development moved into a new era. As a consequence many new methods and development models emerged which in many cases resulted in problems when choosing system development models and methods. As a result of these problems the today standardized modeling language UML (Unified Modeling Language) was created. UML is tailored to support many different types of projects. This is possible because of UML?s capacity to be adjusted and adapted to a specific company environment.The purpose of this bachelor thesis is to investigate how and why companies use UML and what experiences and opinions those who use UML have of using UML in practice.

Ett mönster är uppbyggt av ett motiv som upprepas. Denna upprepning kan fortsätta i all oändlighet. Hållbar antyder långsiktighet. Mönstrets övergripande egenskap är oändlighet. Hur kan denna egenskap hos mönstret nyttjas inom mönsterdesign för att främja hållbar utveckling? Det här kandidatarbetet undersöker mönsterdesignens möjlighet att verka för hållbar utveckling genom att se till begreppet mönster ur ett bredare perspektiv, samt i relation till design för hållbar utveckling.

Umeå Energi are working towards a goal, that in the year of 2018, they will be completely climate neutral. As a part of this, one target is to reduce their grid losses by 4 % of the 2012 level, which corresponds to an overall reduction of the grid losses of just over 1.7 GWh. In many residential areas, the distribution grid is designed and rated for electric heating as the heating in the houses. As many of the houses later has been converted to other types of heating, their electricity use has decreased and the total power output from many of the secondary substations has decreased significantly. Because of this, many of these stations today are well oversized, which in turn means that the energy losses in these stations are unnecessarily high.In this degree project, 25 secondary substations have been studied, all located in residential areas in and around central Umeå.

The purpose of the project has been to work out recommendations that reduce the energy-related costs and environmental impact of HPW Fresh & Dry Ltd., a fruit drying factory in Ghana. The factory produces electricity with diesel and biogas but also purchases electricity from the national electricity company. Heat for the drying process is produced from biogas, kerosene and solar panels. In the project the energy system was analyzed by measuring production and consumption of heat and electricity. The project results show that the factory can become self-sufficient on heat if the available energy is used more efficient. The production units for both electricity and heat have low efficiencies.

This quantitative study, with qualitative elements, intended to investigate the empathic ability among students and its change during social work education in Sweden. The study used a self-assessment form in the form of a questionnaire sent out to 8 of the 15 universities around the country. Respondents who participated in the survey studied in semester 1 & 2 and semester 6 & 7. The instrument which were used, measure the empathy level of the respondents and was a Swedish translation of the instrument, the Interpersonal Reactivity Index (IRI) which is a proven self-assessment form. IRI consists of 28 questions divided into 4 areas (subscales), which together provide a score, where a higher score corresponds to a greater capacity for empathy.

Nipahvirus is most likely spread from bats to other species and causes lethal encephalitis in humans and respiratory illness in pigs. Different species are affected with varying severity but it seems to have an unprecedented zoonotic capacity and the humans affected either die or receive permanent brain damage. Full recovery is possible but very uncommon. Pigs that live and are bread in the areas that these bats frequent are constantly in danger of contracting pneumonias and meningitis and they can spread the virus further on to the people who work with the pigs and process their carcasses. These workers could then infect other humans in their immediate surroundings, their families for instance.

I have through a case study looked on a milkingfarm in Dalarna and been counting on what it would cost to increase the silagestorage. Today they have to little capacity on the existing towersilo because they built a bigger farm with more cows. The reason is that two families decided to start having the production on one farm together and moved all animals from one of the farms to the other farm. So for that reason I have looked on the costs to build a new towersilo or levelsilo. The goal has been not only to look at the buildingcost but also which operatingcost that is included with the different alternatives. I have taken tenders from two different towersilocompany, Bjurenwall and Svenska Neuero and taken tenders from Abetong for a levelsilo with roof and one without roof. The overall feed requirements on the farm is on 240 tonnes dry extract and the old towersilo hold 110 tonnes dry extract so the need for a new foundation is on 130 tonnes dry extract. I have through cost estimate been counting on the specific buildingcost for each buildingaltenative.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

Three-dimensional computer graphics enjoys a wide range of applications of which games and movies are only few examples. By incorporating three-dimensional computer graphics in to a simulator the simulator is able to provide the operator with visual feedback during a simulation. Simulators come in many different flavors where flight and radar simulators are two types in which three-dimensional rendering of large terrains constitutes a central component.Ericsson Microwave Systems (EMW) in Skövde is searching for an algorithm that (a) can handle terrain data that is larger than physical memory and (b) has an adjustable error metric that can be used to reduce terrain detail level if an increase in load on other critical parts of the system is observed. The aim of this paper is to identify and evaluate existing algorithms for terrain rendering in order to find those that meet EMW: s requirements. The objectives are to (i) perform a literature survey over existing algorithms, (ii) implement these algorithms and (iii) develop a test environment in which these algorithms can be evaluated form a performance perspective.The literature survey revealed that the algorithm developed by Lindstrom and Pascucci (2001) is the only algorithm of those examined that succeeded to fulfill the requirements without modifications or extra software.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.

Title: What drives the customer's choice of packaging and which factors influence the customer's packaging cost? ? in the automotive and manufacturing industriesAuthor: Lena AnderssonSupervisors: Annika Olsson, Division of Packaging Logistics, Lund Institute of TechnologyHelena Claesson, Volvo Logistics ABProblem: Which parameters are important for logistic people to think of when they are going to choose a package?Which cost factors are included in the packaging cost?What kind of added value can an emballage supplier provide their services with?Purpose: The purpose of the project was to study the parameters that drives the customer's choice of packaging and the factors that influence the total packaging cost. The study also consists of a valuation of what an emballage supplier can offer to add value to their services.Method: The study is based on interviews with people who are working at Volvo Logistics and Volvo Car Corporation. Volvo Logistics provide their customers with standard packaging material, which they own and administrate. Volvo Car Corporation is one of their customers.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

In many products a compromise between ground clearance and the required space to store the product has to be made. This problem attracted the attention of the authors of this thesis.The objective of this project is to develop a functioning solution to a foldable wheel. The solution should be applicable to several types of product groups. A limitation for this work has been made so that the work only covers solutions for lighter vehicles.The purpose is to drive this project forward, so that a solution can be found. Furthermore the purpose of the report is to clarify how the authors proceeded to design and construct the wheel according to a fixed specification.