In order to increase the independence in everyday life of the elderly population, we have developed a lifting aid for loading in the private car trunk. Independence from outside assistance affects self-esteem in a positive direction and can help increase the quality of life for a large group of individuals. As people age and experience changes in performance, it is important that aids and support is available, particularly to reduce the experience of aging and it?s increasing physical limitations. The aim was to develop a function prototype characterized by simplicity, which facilitates loading of the private cartrunk.The project was conducted at the request of Autoadapt AB, which is one of the leadingactors in car adaptations for individuals with disablilities.

Due to a constantly increasing competitive pressure it is of great importance to constantly strive for improvements in order to gain competitive advantages. Lean Production is a concept that has been introduced with the aim to minimize waste and increase profitability. The purpose of this report is therefore to investigate how to perform effective planning according to the principles of Lean Production, in companys with customer exclusive products, through a case study at Sandvik Mining and Construction (SMC), and to investigate how SMC kan improve their planning of drifting rods at the production unit in Sandviken.The study started by creating a theoretical framework, to describe the subject planning and planning based on Lean Production. This frame work constituted the base for the case study which took place at Sandvik Mining and Construction, and also for the model and planning tool that has been introduced.The result of the study is partly a general model with factors that contribute to a more effective planning. These factors has beed identifed as SMED, which focuses on reducing set up times and in the end to facilitate the planning.

One must consider cost effectiveness when deciding how resources within the health sector should be distributed. Quality adjusted life years (QALYs) are used to measure the value of different medical treatments. QALY is based on utility maximization theory, which suggests that a QALY is always a QALY regardless of who receives it. Therefore, a produced QALY is worth the same regardless of the age or the initial health of the patient. Previous research has shown that these assumptions do not seem to fit the real preferences of individuals.

Social media is used widely around the world by millions of people every day. In this report an analysis has been made of how organisations that are directed towards marginalized adolescents and young adults, are using social media in their working processes. The data has been gathered through qualitative interviews and case studies of three organisations, which are in different stages in their use of social media. The results from the study indicates that every chosen organisation wants to use social media applications for the same purpose, which is to be available where their target audience is situated, but their progress is reduced by elements such as priority, lack of knowledge and time..

Aim: The aim of the study was to investigate 1RM and what power could be generated in bench-press and half squat concentric at certain percentages of 1RM. Special interest was put to evaluate men (M) and women (K), strength trained (ST) verses non strength trained (EST) in generating absolute power as well as power relative to 1RM.Method: In total 59 subjects mean (± SD) age 24.9 ± 4.1 years divided into four test groups: 20 male non strength trained GIH-students (EST M), 20 female non strength trained GIH-students (EST K), 10 male strength trained - sprinters on national/regional level (ST M), 10 female strength trained - sprinters (ST K) on national/regional level. They did two tests on 1RM and power in events of concentric bench-press and half squat in a Smith machine. In the first test session 3 ? 5 lifts were made to measure 1RM in each event.

Persistent pink in beef patties and hamburgers is a problem in the meat industry that has been known for a few decades. It is a costly problem as it can give rejections of food by consumers. Studies around the world have tried to solve the problem but it still remains a mystery. There are many different theories of what is causing the red colour. Some of the most likly theories are reducing hemocromes, high microbiological loads, contamination of nitrite or organic/non organic substanses, DFD meat etc.

Generally, the economic health of Swedish roundwood truck transport companies has not been good. Profitability is important for maintaining the stability in the transport business, which is a condition for long-term transport planning in the forestry sector. The scope of this study was to identify probable factors influencing the profitability of roundwood truck transport companies and quantify the influence of these factors on economic results. The study was carried out at a major roundwood truck transport organisation in mid-Sweden and was implemented in four steps. In the first step economic results from the haulage contractors were collected and a random sample was taken from accounted net margin for the account year 2005/2006. In the second step hauliers were interviewed to identify probable success factors. At the third step data for identified factors were gathered through a questionnaire.

The purpose of this thesis is to gain a deeper understanding about why Swedish banks choose to work and report CSR and also analyze differences and similarities between two banks.Research question: Why do Swedish companies within the financial sector choose to report and work with Corporate Social Responsibility?The major incentives to work and report CSR are because it benefits bank´s businesses, which is driven by stakeholders. Stakeholder pressure is also an important incentive, especially pressure from customers and employees. The incentives that differed between the two banks were morality of the business leader, society and the priority of stakeholders. The incentives that we could not support were guidelines and competitors-.

Latvia has been an independent state twice, the first time during the years 1918-1940 and the second time from the year 1991 and ahead. During these two periods Latvia has been a destination for tourists. The aim of this study is to describe how Latvia as a destination has developed during the years of independence. One further aim is to compare what Latvia?s tourism industry looked like during the same periods to descry similarities and differences.

SummaryA complete graphic profile program along with marketing material has been produced for seven photographers.The material has been produced in consideration to sell their pictures outside of Scandinaviaand Brazil as first priority. The criterion for the profile is to give a message of quality and ofScandinavia. Through research and interviews facts about typical scandinavian design have beenfound. Since the pictures will be exported abroad, a selling packaging solution has been developed. Theparts that are included in the marketing material are: a brochure, display solution, a website and printingexamples.

This technical report describes the master thesis in material engineering called ?Testing of surfaced hardened materials conceivable for gears and shafts?. The work extents 20 academic points. Land systems Hägglunds manufactures and sells different kinds of combat vehicles and terrain vehicles. Since the demands for bigger and stronger vehicles increases all the time, so are the demands on shafts, gears and other transmission details.

In this thesis is studied the electrical load of Paradisskolan with respect to power quality and energy consumption. The school's owner Trollhättans Tomt AB is also interested to know if they can reduce their costs by changing to smaller meter fuses. A recurring ground fault that?s been recorded from powerpanel A1A has been investigated. The school's equipped with an electrical bonding system, harmonic filters for the third harmonic currents, TN-S system from feeding transformer and groundfault monitoring.

The primary purpose of this study has been to investigate the Swedish timber industry?s perception of compression wood. A secondary aim has been to describe particular areas within the production process where compression wood is likely to cause problems. This study has mainly been carried out as a questionnaire. In order to connect the findings to current research, additional information has also been collected by means of a literature review. The questionnaire has been intended for sawmills and wood-manufacturing companies from various production classes and owner categories, as well as from different parts of the country.

The public administration and its officials have a number of values which they have to relate to in their work. The values are a set of democratic and economic values.This study?s purpose is to examine how the officials at the National Insurance Office in Sweden give priority to these values. The study is performed by interviews with officials at two insurance offices.The study shows that the officials in a high degree value the democratic values legal security and public ethics. In turn they experience that productivity, which is an economic value, is being promoted in a high degree from the management.

This thesis is an attempt to study computer games and playful computer programs for childrenand youth at Swedish public libraries. The main method used, is qualitative interviews.The main reason the libraries in the study offer computer games and playful computer programsto their users, is that every member of the society shall have opportunity to use newtechnology such as computers and computer programs. The users of this media are for themost part boys. The librarians in our study wish to have pedagogical games and programswithout violent themes at their libraries. Lending computer games and computer programs isnot of any priority for the libraries..