Sökresultat:
4090 Uppsatser om Load model - Sida 20 av 273
Kunskapsteori och kunskapsorganisation: En diskursanalys
This Masters thesis concerns epistemology in Knowledge Organization KO, as a field of study in Library and Information Science LIS. Using a theoretical model by Birger Hjørland and foucauldian discourse analysis as springboards, this study analyses three epistemological discourses in the practice of KO. The aim of the study is to show how these discourses are constituted and demarcated in relation to KO, as well as to examine how they fit into Hjørlands model. A brief historical outline of some epistemological trends in LIS is sketched, as well as examples of how different epistemological schools influence different parts of KO, e.g. information retrieval, indexing- and classification theory.
Modellering av reserv- och nödkraftsystem i JAS 39 Gripen
Simulation is a vital tool during development of JAS 39 Gripen, since money and time can be saved.The Auxiliary and Emergency Power System, AEPS, is a subsystem of the secondary power system in Gripen. It has the function of providing the aircraft with electrical and hydraulical power before activation and after deactivation of the main engine. The system also functions as backup in case of a safety critical problem in the main power supply system. The system basically consists of a control unit and an auxiliary gearbox. The gearbox is driven by an air turbine.
Metoder för prediktion av kardiovaskulär sjukdom med njurfunktionen
This study examines if the prediction of cardiovascular disease in hypertensive patients can be improved upon when renal function and microalbuminuria are added to the classical risk factors The predictive capability of a model is measured by discrimination, calibration, reclassification and Harrell's C.The results are ambigious. In most cases, microalbuminuria should be included in the model, but the results regarding the other measures of renal function are varied. Therefore, the selection of risk factors to include in the model depends on which measure of prediction one prioritizes..
Gårdsbaserade system för spannmålshantering i den framtida Lantmännenorganisationen :
The Swedish cooperative Lantmännen Ekonomiska Förening has initiated a project labelled "Operation Blåljus" that includes an extensive program for closing down elevators. The number of elevators will be reduced from 92 to approximately 15 after harvest of 2007. The objective of Blåljus is to increase the price of grain with 10 öre/kg. A project has been initiated at the Lantmännen Grain division where the purpose is to provide the farmers with support in their decisions and practical advice how they can load a 35 ton grain truck on 30 minutes. The result from the project will serve as a support system to the farmer in his ambition to achieve cost efficient systems to load a truck with grain on the farm.
Modellbaserad systemutveckling i komplexa verksamheter. En fallstudie av Coremetoden
In system development it is today increasingly common to use a model-based system development method. These methods that are suited for Agile work with simple and quick updates and implementations of new applications in systems conform to the requirements that are becoming more important today, namely more flexible and less expensive system that still maintain high quality and safety.A company that has been working with this type of system development method for a long time is Genicore AB, which also has developed their own tools and model language in order to better model the information management systems in complex and abstract operations. Genicore AB is trying to spread their method other developers and have therefore taken the initiative to start this study. The method is evaluated and tested by two students with relatively little experience in model-based systems engineering in order to gain a new perspective on how the method functions. The method has been applied to an educational activity in order to test it in a new domain, and this led us to our research question;?What criteria are of particular relevance in the implementation of a MBSD method on on complex businesses??Through literature reviews and interviews, we formed an idea of how model-based system development works from a theoretical perspective, and then continued to the case study conducted on the educational activities at the faculty of IT at University of Gothenburg.
Ett företags internationaliseringsprocess : - i ett land kulturellt skilt från dess hemmamarknad
AbstractPurpose:The purpose of the study is to describe the internationalization process of one firm when in a country culturally diverse from the firm?s original market.Methodology/approach:The study is a single case study which examines one firm?s internationalization process when entering the Chinese market. The approach has been an empiric interaction between empirical and theoretical data.Findings:The theory of the Uppsala model was applied to the case-company to test the model?s completeness. The authors found weaknesses and added three more aspects to the model.
Gestaltningsförslag till ny förskola på Zakrisdal
Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.
Utredning av frekvensregleringens påverkan på mekanisk utrustning i en kaplanturbin
As a consequence of increasing wind power installations in the Nordic grid the last years, the need for regulating power has become larger. In the Nordic grid, regulating power is mainly provided by hydro power. One part of the regulating power is called frequency control, which ensures that the grid frequency is stable and close to 50 Hz.However, setting the turbine into frequency controlled operation may cause stress and wear of the components in the mechanical control system. Frequency controlling implies large and frequent servo forces and longer travelling distance of the sliding bearings in the Kaplan turbine.Based on one selected Kaplan turbine, Selsfors G1, measurements and MATLAB calculations have been performed in order to determine forces and movements of the linkage system. With these forces and movements as input, stresses and fatigue have been determined as well as sliding distances, bearing pressures and wear of bearings during a typical lifetime of 40 years.The results indicate that no severe wear exists on the bearings during 40 years of service.
Klimatsimulering av ett kontorsrum : Hur de termiska stigkrafterna påverkar ventilationseffektiviteten
AbstractIn urban societies people spend more and more time indoors, which put great demands on the indoor environment. If the ventilation is to manage the removal of unwanted substances in the indoor air, a good mixing of the air is required. The question arises that, whether the buoyancy forces will counteract a good mixing of the indoor air or not?This report aims to clear up the difficulties whether you need to consider the buoyancy forces or not, when adjusting a ventilation unit. For studying the indoor mixing of the air a two dimensional model is constructed in COMSOL Multiphysics.
Det allmännas skadeståndsansvar : Skadeståndsansvar för ideell skada enligt frihetsberövandelagen
BACKGROUND: Today?s societal changes, including high rate of change and increasing information flows, are increasing the demand on the individual mental capacity. It becomes increasingly difficult to analytically process all the different dilemmas and everyday decisions as individuals have a limited mental capacity available to make these decisions. Thus, it has been suggested that ego-depleted relies more heavily on intuition, which is less burdensome, when making decision. However little is known about to what extent intuitive decisions differ from analytic.
Nitrat i grundvattnet : Modellanalys av vattenflöde till Hörviks vattentäkt
A well, situated on Listerlandet in the western part of Blekinge in Sweden, has a very high content of nitrate. Water with a too high content of nitrate is hazardous to human health, in particular to small children. The area surrounding the well is mostly drained agricultural land with some larger farms for chicken and mink. The well takes its water from the bedrock and is deeper than most other wells affected by nitrate. The bedrock in the area is dominated by limestone with a relatively high flow of water.This thesis was performed in order to find the source of the nitrate.
Dimensionering av betongkonstruktioner : En jämförande studie av BBK 04 och Eurokod 2 vid dimensionering av balkar och pelare
Today, we use BKR and BBK 04 when designing concrete structures inSweden, which will, in the near future, be replaced by Eurocode 2. When you are designing buildings, you will use Eurocode 2 Part 1-1 and with this new standard, some new rules and general rules will be necessary to adopt. To examine how BKR and BBK 04 tells apart from Eurocode 2 when designing concrete structures, one beam and one column with often common dimensions, is studied. The beam is designed with consideration of (considerate to) durability at bending moments, shear forces and control of cracking. The column is designed with consideration of durability at eccentric axial load and bending moments in cross section on account of (due to) geometric imperfections. BBK 04 has gone one step closer to Eurocode 2 than earlier editions and the things that are different, when calculating reinforcement, is how they use the partial factors.
Den litterära nätsajten Vulkan.se och en ny modell för den litterära processen
The aim of this thesis is to investigate how the literary site Vulkan.se affects the conditions for publishing, distribution, incorporation in value systems and feedback in the literary process, as it appears in Lars Furuland?s model of this process. The purpose is also to propose an updated version of the model. This is achieved through a qualitative testing of Furuland?s theory.
Processbarhetsteorin i undervisning : ???Analys av två program som används av andraspråksinlärare
I have with this thesis sought to understand how chick lit could be useful in the classroom in the teaching of Swedish B-course in high school. Based on the model of critical literacy I am arguing that this genre would help to meet the objectives of the policy documents which, among other things, are to critically examine and analyze various types of texts.I have found that some of these texts could be used for analyzing and critically examine the ideological dimensions of texts and cultural heritage by the model of critical literacy, and also as a counterweight to the more traditional teaching of the canonical literature as a literary historical stuff that students should learn. I have also wanted to create a basis for discussions about literature in the classroom based on the chick lit genre. To do this I have, based on three themes and questions from the model of critical literacy, tried to focus on issues that might emerge from the ideological analysis and critical review. The model aims to deconstruct norms of society, and in the work of chick lit, I wanted to show how you could deconstruct norms around gender..
Estimering av kapitalkostnad för onoterade företag
The cost of capital for traded companies is basically assessed on information from thefinancial market. Small and non-traded companies are lack of this necessary financialmarket information in order to determine an appropriate equity risk premium and tocompute the cost of capital.In the absence of financial information necessary for an external investor, it is difficult toevaluate a non-traded company with the Capital Asset Pricing model (CAPM), which isbased on the financial market information. It measures only the systematic risk, which isthe contribution of one share to the market risk of a portfolio. It is therefore important tofind models that reflect the small and non-traded companies? real business value and theirunique characteristics.