In this thesis a concept for floor hatches for foam pits has been developed. Since there is an existing solution that is powered by hydraulics and is expensive, the goal was to develop a cheaper solution, as simple as possible.A number of different concepts were developed and evaluated. A concept with five sections that are pulled to the side and stacked on each other was chosen as it was thought to have the lowest risk of crush injuries and to be easiest to manage and control. In the opening behind the foam mattress a lifting table is placed to regulate the height of the stacked sections.To be allowed to be installed in the floor of sports halls the sections must be dimensioned according to the construction standards for these types of buildings. Different dimensions of beams in steel and wood materials were evaluated and of those, who lived up to the requirements of the standard, a concept was chosen.

The climate issue is a significant question, and the problem is mainly caused by human activities. Everyone can help to counteract the enhanced Greenhouse effect by reducing the amounts of energy they use and by not consuming more products then they need.Schools are some of societies many consumers and therefore contribute to the Greenhouse effect. The School also has an important task; to teach and disseminate knowledge and information about the climate and the environment. According to the Swedish National Agency for Education, Skolverket, must all schools regularly consider the environment and sustainable development throughout the entire education process. Unfortunately, this is not the case for many schools in Sweden today.One of many tools that can be used to coordinate environmental work and initiatives, and also to make it more efficient, is environmental management systems.

At the moment in central Täby there are small district heating network operated by Fortum Heat. The distribution network has an annual heat demand of about 70 GWh, which is supported by the network's two plants, Galten and Farmen. Täby as a region is rapidly growing and there are grand plans to develop the area. Estimated market potential for a future district heating expansion in Täby is very high and as early as in 2007 Täby decided to invest in a large-scale expansion. In autumn 2009 Täby did a procurement process, known as the ?Täby initiative?, to find a partner that could implement those expansion plans. To secure a cheap basic production the partner also need to build a power plant at Hagby recycling center. Despite high interest during initial state of the process, only one procurement offer were received and Täby suspended the contract in March the following year.

The purpose of this thesis is to examine how the Management Control System is affected by a change in the owner structure from family owned to not-family owned. The study also tries to identify explaining factors behind the possible effects to the Management Control System. The study is based on a comprehensive case study on the company Alcro-Beckers which, in year 2001, was acquired from the owner Lindéngruppen fully owned by Ulf G Lindén. The acquirer was the non-family owned company Kemira OY, a Finnish stock listed group. The empirical foundation mainly comes from interviews conducted with people who were/are directly connected to the company, either as employees or as representatives for the owner.

The purpose of this thesis is to analyze the design and function of an engine production management?s control system and its intended function, and to contrast it with the present management control systems in use on an operational level. Interviews conducted with employees from all levels of the engine production are the main source of this study?s empirical foundation. Information has also been gathered from relevant written material such as annual reports, internal documents etc.

Uppsatsens titel: Ekonomistyrning av FoU-verksamhet, med fokus på styrning av utvecklingsprocessen Seminariedatum: 2007-01-18 Ämne/kurs: FEK 582 Kandidatuppsats, 10 poäng Författare: Oscar Danefors, Frank Fagerlund, Joakim Puusaari, Fredrik Rubin Handledare: Per-Magnus Andersson, Peter Jönsson Fem nyckelord: Produktutveckling, FoU, stage-gate-system, styrning, management style Syfte: Syftet med uppsatsen är att gå djupare i utvecklingsdelen av FoU-verksamheten genom att beskriva samt analysera styrningen av utvecklingsprocessen. Metod: I uppsatsen används ett hermeneutiskt perspektiv och en kvalitativ forskningsstrategi som med en jämförande design leder till att en multipel fallstudie används för att uppnå syftet. Teoretiska perspektiv: Management style, projekt styrning, stage-gate-system, resultat styrning Empiri: Studien baseras på intervjuer med ansvariga inom FoU på följande fem företag: Akzo Nobel Decorative Coatings Europe, Alfa Laval, Ericsson Mobile Platforms, Procordia Food och Tetra Pak. Resultat: Följande har funnits i uppsatsen: ? Funnit att stage-gate-system är har en stark koppling till centraliserade organisationer.? Att det finns andra system än stage-gate-system som fungerar i en decentraliserad organisation? Att risken i våra fallföretags utvecklingsprocess inte skiljer sig åt mellan olika branscher.? Att det finns ett generellt mönster i våra fallföretags stage-gate-systems produktutvecklingsprocess.? Att det kan finnas ett samband mellan bransch, utvärderingsenhet och utvecklingsprocess..

This master thesis has been done in cooperation with Sweco Viak AB in Sundsvall. The aimwith the project is to investigate the purifying effect of percolation filter due to iron andmanganese. The overall goal was to investigate how the parameters surface load,sandfractions, and burden time affect the purifying effect. The expectation is to optimize thedesign and find a demouldning of the filter that gives sufficient purifying with a highersurface load. As an attempt to accelerate the curing of the filter, experiments with a layer ofsand which surface has been covered with manganese ore (MnO2) on top of the filter havebeen done.As test filters 10 L bars were used and the experimental work was performed at thewaterworks in Hassela and Munkbysjön.In Hassela different sandfractions were tested.

As a consequence of increasing wind power installations in the Nordic grid the last years, the need for regulating power has become larger. In the Nordic grid, regulating power is mainly provided by hydro power. One part of the regulating power is called frequency control, which ensures that the grid frequency is stable and close to 50 Hz.However, setting the turbine into frequency controlled operation may cause stress and wear of the components in the mechanical control system. Frequency controlling implies large and frequent servo forces and longer travelling distance of the sliding bearings in the Kaplan turbine.Based on one selected Kaplan turbine, Selsfors G1, measurements and MATLAB calculations have been performed in order to determine forces and movements of the linkage system. With these forces and movements as input, stresses and fatigue have been determined as well as sliding distances, bearing pressures and wear of bearings during a typical lifetime of 40 years.The results indicate that no severe wear exists on the bearings during 40 years of service.

The aim of this thesis is to examine how salesperson control can be exercised in a retail store environment. A case study has been performed on a Swedish fashion company emphasizing the relationship between the company?s upper level management and their retail store operations in order to describe, analyze and classify the prevailing management control mechanisms. The paper presents an agency theoretical approach to the relationship applying behavior- and outcome based control theory, performance measurement theory and incentives theory in order to give a comprehensive image of the control system. The main finding is that the company?s management control system as applied to the sales force in its retail stores can be categorized as mainly behavior-based despite several explicit outcome-based features..

The power system modelled in this thesis work has been developed for simulationwhen e.g. the production in some part of the power system is changed. The powersystem has been modelled according to the swing mass of the system, the frequencydependency of the load and the turbine governor. The model determines the systemfrequency, the period of regulation and the power exchange between the differentsubsystems in the Nordic synchronized system.In this model the system frequency is assumed to be the same in all different parts ofthe power system and the voltage conditions in the power system are neglected. Forthat reason power swings does not occur between different subsystems in the powersystem, which usually occur as a result of the swinging connection between thetransmissions line.

Syftet är att redogöra vilka avancerade IT-stöd för ett balanserat styrkort det finns på den svenska marknaden, samt att analysera de likheter och skillnader som går att finna mellan dessa olika system. Uppsatsen är uppdelad i tre delstudier; litteraturstudie, kartläggning av leverantörer på den svenska marknaden och en fallstudie av sex företag. Främst har vi utgått från en kvalitativ metodansats och vår undersökningsansats har primärt varit en deduktiv metod. Vi fann nio större avancerade IT-stöd på den svenska marknaden varav fem var av typen skräddarsydda system och resterande fyra var standardsystem. De främsta likheterna mellan de två systemgrupperna är att de klarar av att stödja det balanserade styrkortets syfte i den utsträckningen som företagen förväntar sig.

Eutrophication has been a problem in aquatic systems for a long time. It is well known that the key nutrient to control the eutrophication process is phosphorus. Lately, it has been possible to reverse the process and recover lakes from eutrophication.During a long time Lake Näsnaren in Katrineholms kommun, Södermanland, has been exposed of a large amount of phosphorus from the city's wastewater. The lake has a great value as a habitat of rare species but also a high recreation value for people living in Katrineholm and Södermanland. Lake Näsnaren is situated in a Natura 2000 area.

Regulations on the exhaust emissions of HD-diesel engines are becoming more and more stringent, and therefore, emission after-treatment systems are commonly used. These systems rely on catalytic conversion of NOx,CO , and HC emissions, and are thus dependant on temperature. At low load of the engine, exhaust temperatures are not sufficient for the after-treatment components. Therefore, means to increase the exhaust temperature while maintaining low emissions and fuel consumption are needed.The focus of this project has been to develop strategies for the lift profiles of exhaust and intake valves in the engine, with the goal to raise exhaust temperature in combination with low emissions and fuel consumption. The strategies have been tested in a single-cylinder research engine equipped with a hydraulic variable valve actuation system.

Background and problem: Higher and other demands are made on management control systems in organizations which have a superior non-financial objective. Systembolaget, a state-owned company with monopoly to sell alcoholic beverages in Sweden, combines two main objectives which can be considered as conflicting, one financial target and one superior non-financial public welfare target. The research questions are focused on the translation of information through the organization?s levels and if the management control system makes it possible to run the organization according to both of the two main conflicting objectives.Purpose and Delimitations: To describe, analyze and evaluate how management control can be used in an organization, which is not profit maximizing and has both non-financial and financial objectives. The essay does not try to describe or draw generalized conclusions regarding general perspectives on Systembolaget?s assignment and objectives.Method: A qualitative and evaluative case study based on interviews with five employees at different levels in Systembolaget has been carried through.

The aim of this study was to evaluate the effects on a simulated wastewater plant regarding GHG emissions and use of energy and resources when implementing source separated wastewater systems. The effects were studied for different restrictions of effluent quality and for different temperatures on the influent. The simulation model BSM2G calibrated for Käppala wastewater treatment plant was used. The task was executed by simulating nine different scenarios with an increase in influent load from new connections equivalent to 3, 10 and 30 % of the present connections. These new connections were served by conventional, urine separated or black water separated systems.