Hungary?s share of renewable energy in 2010 was 7.9 %, and their renewable energy goal for 2020 is 14.65 %. Geothermal energy is one option that could help to achieve the goal, since Hungary has favorable bedrock, the temperature gradient is above average and thepermeability is high. Today Hungary is importing just over half of its primary energy supply. Because of political conflicts between nations Hungary wants to expand its own production of energy.

Given that the end-customer has become more demanding, the retailer has to deliver products according to the market demands, which have forced manufacturing companies to constantly search for new opportunities to reduce costs and improve efficiency. It is, therefore important to choose suppliers that are able to compete with the market demands.The market demands in the textile industry have lead to shorter product life cycles, which have caused manufacturers to deliver flexibility with high technology to compete successfully on the global market. To achieve the market requirements the underlying factor is to be aware and optimally use and control time. New technology can have a major influence in the production development, if the company choose to take benefit of the advantages, by optimal allocation of the internal resources the productivity and efficiency will increase, to accomplish a competitive advantage. One way to achieve this is by investing in a Unit Production System.In our thesis we have questioned what the main driving forces for an apparel manufacturing company is when it chooses to invest in new technology.

Today's climate and environmental issues have now been up for discussion for quite long. Various environmental measures have been taken, but it is not always certain that those measures actually are for the better because of the complexity of our environment. Therefore, studies of whole life cycles are very important even if they are time and resource intensive.Real estate accounts for 15% of global carbon emissions, but also affects our environment in many other aspects. In Sweden this number is even higher. About 30 % of its carbon dioxide emissions originates from building sector and changes are therefore of great importance.

Today's climate and environmental issues have now been up for discussion for quite long. Various environmental measures have been taken, but it is not always certain that those measures actually are for the better because of the complexity of our environment. Therefore, studies of whole life cycles are very important even if they are time and resource intensive.Real estate accounts for 15% of global carbon emissions, but also affects our environment in many other aspects. In Sweden this number is even higher. About 30 % of its carbon dioxide emissions originates from building sector and changes are therefore of great importance.

Den här uppsatsen syftar till att undersöka de psykosociala påfrestningar som heltidsengagerade på studentnationer i Uppsala upplever i sitt arbete. Genom en kvalitativ datainsamling under sammanlagt åtta intervjuer med "heltidare" har deras arbetsmiljö kartlagts med fokus på arbetsmoment som de själva upplever som stressande eller påfrestande.Analysen har sedan skett med bakgrund av tre stressmodeller: krav-/kontroll, effort-/reward och allostatic load. Med stöd av tidigare forskning av Maslach & Leiter, Asplund och Thulin Skantze. Detta har givit en bred och heltäckande uppfattning av hur de psykosociala påfrestningarna påverkar respondenternas utifrån deras egna upplevelser av sin arbetsmiljö.Av de framkomna och analyserade resultaten har flera slutsatser uppkommit. Framför allt kan man konstatera att heltidare har ett i längden ohållbart tungt arbete sett till arbetstiderna.

Many of todays studies show that district heating is one of the betteralternatives as heating source because of its low environmental load.The energy source is often leftovers from other processes producing energy or waste, like garbage or chips.Electricity in combination with geothermal heating is another heating system that has increased sharply during the last years, and also this system decreases the discharges that have negative affectson the environment compared to several other heating methods.This report aims to, concentrated towards these two different heating systems, estimate the amounts of discharges they indirect cause and how the environment is affected.We have calculated the mean value for discharges of carbon dioxide, nitrogen oxide, sulphur oxide and dust generated from electrical power used in Sweden.Through interviews and research we have gained data for the same substances that district heating based on combustion of garbage and biofuel generates.We have also in cooperation with a housing company chosen a building we see representative for many of the new single-family houses built in Sweden today.Based on its shape and appearance we theoretically created three alternatives of the same house, each of them with climate screens different from each other.Together with the amounts of discharged environmental affecting substances, these houses were the base for our calculations and studies when investigating the different heating sources environmental effect.The results have thereafter been analyzed and discussed from different angles..

?Boverket? the Design Regulations in Sweden, also called BKR has for a long timebeen the mandatory standard that has guided and regulated construction design. Butat the end of 2010 BKR was replaced with Eurocode. This report deals with thecomparison of these two standards when it comes to wood construction. Duringwinter 2009/2010 there were many roof collapses due to excessive loads on theroofs across Sweden.

AbstractNowadays, companies and organizations manage large amounts of data to be used as support in decision making. A good solution for data management is in the form of data warehouses. A data warehouse is used to gather information from multiple sources within a company and arrange the information in a way that makes it easy to retrieve and analyze. Designing a data warehouse is not a simple task. The study herein will focus on what a data warehouse is and how the ETL process is used for data storage in the data warehouse. ETL stands for Extract, Transform and Load and is the process that retrieves data, transforms it and finally loads it into the data warehouse.

Bakgrund: Vårdplatserna på svenska sjukhus har minskat drastiskt det senaste decenniet.  Detta har inneburit en högre beläggning på de kvarvarande och medfört längre väntetid på landets akutmottagningar. Platsbristen skapar, ibland dagliga, överbeläggningar och utlokaliseringar av patienter.Syfte: Att undersöka hur sjuksköterskor och läkare upplever att vårdplatssituationen påverkar deras arbete och vad detta får för konsekvenser för patienterna.Metod: Kvalitativ design med semistrukturerade intervjuer med tre läkare och nio sjuksköterskor från akutvårdsavdelning med inriktning infektion, mottagning med akutintag och akutmottagning. Analysarbetet genomfördes med Malteruds (2009) innehållsanalys. Resultat: Vårdplatssituationen kommer sig av en brist på vårdplatser inom främst medicindivisionen, samt en oförmåga att hålla de platser som finns öppna på grund av sjuksköterskebrist. Bristen på vårdplatser har inneburit en oförmåga för läkare och sjuksköterskor att utföra sitt arbete i enlighet med sin kompetens och beprövad erfarenhet.Slutsats: Svårigheterna med att finna platser till patienterna på deras hemavdelningar samt de ständiga omflyttningarna av patienter medför svårigheter för vårdpersonalen att ge god medicinsk vård och omvårdnad vilket medför stora risker för patientsäkerheten.

Commissioned for this report is Ramboll, Bridge and Tunnel Unit in Stockholm. Theidea throughout the work has been to primarily help bridge designers compilingadvice and instructions on how fatigue verification for railway bridges in reinforcedconcrete shall be performed under the new rules, the Eurocodes.After the introduction of the Eurocodes in 2011 has major problems emerged amongdesigners around Sweden. In some areas, it differs in the calculation rules comparedwith rules from the Swedish Transport Administration and the National Board ofHousing, Building and Planning calculation. Fatigue verification is one area where thenew calculation rules are different from the past.A large part of the report has been to interpret and find the relevant information inthe Eurocodes concerning fatigue. When questions or doubts have surfaced, this hasbeen discussed with Elisabeth Helsing at the Swedish Transport Administration andbridge designers at Ramboll.The result is a report where the structure is organized in the way that the bridgedesigners can move from cover to cover and realize that fatigue verification in realityfollows the same order as the report's sections.

Syftet med den här uppsatsen var att genom en litteraturstudie undersöka vilka huvudsakliga förklaringar som fanns till unga vuxnas psykiska ohälsa. Det var också av intresse att få se om det fanns någon skillnad i sättet att förklara orsakerna till psykisk ohälsa hos män respektive kvinnor. Studien innehöll artiklar ur Läkartidningen, Psykologtidningen, Transmittorn samt en rapport från SOU. Resultatet visade att unga vuxnas psykiska ohälsa bottnade till stor del i ett allt mer individualiserat samhälle. Det hade lett till att ett stort ansvar, många gånger högt över vad individen mäktade med, hade lagts ned på individnivå.

At the Division of Electricity at UppsalaUniversitythere are ongoing researches, including a research concerning turbo generators.Turbo generators produce a large share of electricity in the world; however they are costly mainly due to the fact that the cooling and ventilation that are needed to eliminate the excess heat from the generators are expensive. Turbo generators work with high efficiency and in this project, the main task is to simulate a generator while taking into account that the generator must be designed against self-oscillation, centrifugal force, exhaustion and heat. The turbo generator must be simulated without being too expensive and complicated.In this project, the dimensions of the turbo generator depend on the efficiency of it, and where the losses are in the generator. Furthermore, the optimum values need to be chosen with the help of the ACE simulation program. The report begins with an introduction describing the project followed by a task description that is dealing with the project.

Phosphorus is the single most potent contributor to eutrophication of freshwater and has also been shown to contribute to the toxic algae blooms in the Baltic sea. The dynamics and paths of losses of phosphorus from arable lands are not fully understood. It is known that phosphorus can be lost directly from plant material to water. In studies where plant material has been subjected to several freeze-thaw cycles, large amounts of phosphorus have been lost. Most studies have been conducted under field conditions, with many factors effecting the measured losses of phosphorus, such as weather and type of soil. This study was performed in a controlled environment without the presence of soil. Instead of soil, small glass beads were mixed with the plant materials in vessels, to make possible homogeneous leaching with water through the mixture of glass beads and plant materials. In this study, clover, ryegrass and dry straw were cut to pieces, approximately 2 cm long.

AbstractAs a developer of database-driven applications you will be faced with difficult choices, when it comes to choosing database, server and programming language. For the result to be satisfactory it requires the different techniques to interact well with each other and also fulfill performance expectations. This is even more important when the application is deployed to the cloud and the response time plays a major role.This paper evaluates different databases and their performance. To test the databases there was an application made in the server script language PHP or Hypertext Preprocessor and it was deployed to Windows Azure cloud platform. The test applications task is to call and load databases by controlled requests which creates, reads, updates and deletes data in an relatively large extent.The results shows that locale databases or databases in the same data center as the server generates the fastest response.

Cycle time has a direct influence on number of returnable crates needed and therefore a crucial parameter for cost structure and pricing of the user fec in the pool system.For providing the growing market, number of crates has to increase as well as the utilization of existing crates. To accomplish this aim, cycle time for the whole supply chain has to be fully unravelled and understand.The purpose is to map cycle time and stock movements, to see how, where and when crates are being used in the supply chain. The goal is to make a method of cycle time calculation, together with suggestions of improving the pool system and decrease cycle time.The study has been a combination of qualitative and quantitative research and comprises the three biggest wholesalers in Sweden; ICA, Coop and Axfood. Furthermore have 65 grocery shops, connected to the wholesalers, been investigated and mapped.The study has come to a conclusion that cycle time for an average returnable crate is 19 days. The full-size and half-size crates have a bit longer cycle time, 21-22 days, while Dual Height-crates and shallow haif-size crates have 17-18 days.