SUMMARY The purpose of this study was to explore how nurses in the emergency department experience and cope with stress in their workplace. The study had a qualitative, descriptive approach and was based on nine individual, semi-structured interviews. They were then processed using content analysis. The content analysis of interviews resulted in two categories, "the nurse's experience of stress," "the nurses coping with stress." Together, the categories highlighted how nurses experienced stress during and after their shifts. The study showed clearly that all nurses experienced and coped with stress in their daily work activities..The authors noticed that stressful time for the nurses were repeated at each session and were similar in character.

The aim of this study is to illustrate, and analyze how social workers are able to more effectively pursue operative possibilities within their own particular organizations. The main question concerning this issue is: How are social workers, working within the same district organization able to realise any potential for co-operation with other social workers, in different locales and units, yet working within the same organization? Following on from this question, further issues arise such as: 1. How do the varying demands of the clients affect the workload of the social worker? 2.

In the year 2010 a transition will take place here in Sweden from the present rules how to dimension buildings in to the common rules with have been developed in Europe, the Eurocodes. Eurocode is the term for a collection standard that contains calculation rules in how to dimension constructions and buildings. They are developed by the European standardize committee.The purpose with this examination work is to get an insight of what changes this will contribute to, and how it will affect the dimensioning. Are there going to be any differences in the dimension you finally chose?To investigate these possible differences two constructions will be calculated first in the present Swedish rules, and then in the coming eurocodes.One of these two constructions will be build completely in steel, while the other will be build completely in concrete.

BACKGROUND: Chronic Obstructive Pulmonary Disease (COPD) is a slow progressive disease affecting the family caregivers by limiting their lifestyle. Subsequently the situation can be experienced as stressful for both the afflicted and the relatives. To easier understand the needs of the caregivers of family members suffering from COPD have, it is important to get an insight into their experience of every-day life, so that medical staff can help, support and promote their health according to their needs. AIM: To illustrate caregivers? experiences of living with a family member suffering from Chronic Obstructive Pulmonary Disease.

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

The aim of this project was to look into ten small sewer systems in the municipality of Laholm, in Sweden, in order to work out common assessment grounds for them. The sizes of the systems for purification of wastewater were within the range of 25 to 2000 population equivalents. Our method was to study literature, the laws and regulations applicable and the files at the municipality. The conclusion is that every sewer system is different and every situation is unique. We concluded that based on laws and assessment grounds sewer systems equal in size and pollution load ought to have similar demands attached to them.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

Denna rapport behandlar en undersökning av olika lastbalanseringsalgoritmer i Linux Virtual Server. Undersökningen har gjorts i ett webbkluster (Apache var webbservern som användes) med tre heterogena noder, där operativsystemet var den detalj som skiljde dem åt. Operativsystemen som ingick i undersökningen var Windows Server 2008 R2, CentOS 6.2 och FreeBSD 9.0. De faktorer som undersöktes mellan de olika algoritmerna var klustrets genomsnittliga svarstid vid olika belastning och hur många anslutningar som kunde hanteras av klustret, detta gjordes med verktyget httperf.Undersökningen ger svar på hur ett heterogent webbklusters genomsnittligasvarstid och arbetskapacitet kan skilja sig åt beroende på vilken algoritm som används för lastbalansering. Resultatet visar att den genomsnittliga svarstiden håller sig låg tills en hastig stigning inträffar.

AbstractThe aim of this study was to illuminate and collect existing research from the beginning of the 21 st century about nurses work environment in institutional and elderly care in Sweden.A literature review was made by analyzing eleven scientific articles. The result showed mainly information about nurses work load. The information dealt with high work demands, too much responsibility, shortage of staff, time press and stress. Furthermore nurses reported a lack of co-operation between staff and management. An important part in nurses? work was appreciation from colleagues, management, patients and relatives.

AbstractIntroduction: Hand Arm Risk Assessment Method (HARM) is a tool to assess the risks of deve­lo­ping complaints of the arm, neck or shoulders during manual work. The method was developed in the Netherlands primarily for employers, but is also used as an aid to work environment in­spec­tors. The purpose of this study was to evaluate the HARM-method for assessment of biomecha­nical exposure of the upper limbs when performing manual tasks as well as its suitability to be used within work environment inspection. Methods: Ten labour inspectors conducted assessments of five video-recorded work tasks. Assess­ments made with HARM were compared with those made with the Assessment of Re­pe­titive Tasks (ART) tool and with ACGIH Hand Actvity Level (HAL) - both methods for assess­ment of bio­mecha­nical exposure of the upper limbs - and with the model for the assessment of re­pe­titive work in the pro­visions of the Swedish Work Environ­ment Autho­rity on ergonomics for the prevention of mus­culo­skeletal disorders, AFS 1998:1.

Information overload is by no means a new concept, but has come to prominence the last decade. A generally accepted definition of the phenomenon does not exist. The main question in this master thesis is how to define information overload in order to create a connotative concept for information science. This thesis reviews the nature and causes of information overload, and considers possible solutions, both individual and technical, and their relevance to the information professional. The review of the results shows that researchers seldom or never give a legible definition of what the concept information holds.

Around 30,000 people in Sweden suffer stroke every year, out of which about 12,000 end up with language difficulties, aphasia. Behind every person with aphasia there are significant others whose lives are also affected. Studies of how aphasia affects the health of these people are few. The overall aim of the present study was to examine how significant others of people with aphasia perceive their life situation, and how their quality of life is affected by the illness of their partner. Spouses of people with aphasia were contacted through aphasia groups and the Swedish Aphasia Association.

Regulation of rivers by dams and reservoirs is a good example where anthropogenic impact could be considerable both in the local environment, but also has major implications upstream and downstream. This study was accomplished as a literature study of the river Nile, which is extremely important for water supply. The purpose of this study was to investigate the consequences of the construction of the Aswan High Dam, to obtain a consistent flow for water supply, irrigation and power generation in Egypt. Since Egypt has a very hot and dry climate large amounts of water in reservoir is lost to the Nubian aquifer system and by evaporation. The consequences from constructing the dam are considerable.

The combustion engines in today?s vehicles are getting more and more advanced and there are increasing demands on that the engines should operate during optimal conditions. Examples of internal combustion engine parameters which may be carefully controlled are the rate between fuel and air, that this gas mixture is homogenous enough and that it is ignited at the correct moment. Moreover, the requirements of these parameters vary depending on, among other, engine speed and load. To meet these requirements in all occurring operation conditions, it is required that many subsystems work together.