Due to a constantly increasing competitive pressure it is of great importance to constantly strive for improvements in order to gain competitive advantages. Lean Production is a concept that has been introduced with the aim to minimize waste and increase profitability. The purpose of this report is therefore to investigate how to perform effective planning according to the principles of Lean Production, in companys with customer exclusive products, through a case study at Sandvik Mining and Construction (SMC), and to investigate how SMC kan improve their planning of drifting rods at the production unit in Sandviken.The study started by creating a theoretical framework, to describe the subject planning and planning based on Lean Production. This frame work constituted the base for the case study which took place at Sandvik Mining and Construction, and also for the model and planning tool that has been introduced.The result of the study is partly a general model with factors that contribute to a more effective planning. These factors has beed identifed as SMED, which focuses on reducing set up times and in the end to facilitate the planning.

Aim: The aim of the study was to investigate 1RM and what power could be generated in bench-press and half squat concentric at certain percentages of 1RM. Special interest was put to evaluate men (M) and women (K), strength trained (ST) verses non strength trained (EST) in generating absolute power as well as power relative to 1RM.Method: In total 59 subjects mean (± SD) age 24.9 ± 4.1 years divided into four test groups: 20 male non strength trained GIH-students (EST M), 20 female non strength trained GIH-students (EST K), 10 male strength trained - sprinters on national/regional level (ST M), 10 female strength trained - sprinters (ST K) on national/regional level. They did two tests on 1RM and power in events of concentric bench-press and half squat in a Smith machine. In the first test session 3 ? 5 lifts were made to measure 1RM in each event.

Persistent pink in beef patties and hamburgers is a problem in the meat industry that has been known for a few decades. It is a costly problem as it can give rejections of food by consumers. Studies around the world have tried to solve the problem but it still remains a mystery. There are many different theories of what is causing the red colour. Some of the most likly theories are reducing hemocromes, high microbiological loads, contamination of nitrite or organic/non organic substanses, DFD meat etc.

Generally, the economic health of Swedish roundwood truck transport companies has not been good. Profitability is important for maintaining the stability in the transport business, which is a condition for long-term transport planning in the forestry sector. The scope of this study was to identify probable factors influencing the profitability of roundwood truck transport companies and quantify the influence of these factors on economic results. The study was carried out at a major roundwood truck transport organisation in mid-Sweden and was implemented in four steps. In the first step economic results from the haulage contractors were collected and a random sample was taken from accounted net margin for the account year 2005/2006. In the second step hauliers were interviewed to identify probable success factors. At the third step data for identified factors were gathered through a questionnaire.

This technical report describes the master thesis in material engineering called ?Testing of surfaced hardened materials conceivable for gears and shafts?. The work extents 20 academic points. Land systems Hägglunds manufactures and sells different kinds of combat vehicles and terrain vehicles. Since the demands for bigger and stronger vehicles increases all the time, so are the demands on shafts, gears and other transmission details.

In this thesis is studied the electrical load of Paradisskolan with respect to power quality and energy consumption. The school's owner Trollhättans Tomt AB is also interested to know if they can reduce their costs by changing to smaller meter fuses. A recurring ground fault that?s been recorded from powerpanel A1A has been investigated. The school's equipped with an electrical bonding system, harmonic filters for the third harmonic currents, TN-S system from feeding transformer and groundfault monitoring.

The primary purpose of this study has been to investigate the Swedish timber industry?s perception of compression wood. A secondary aim has been to describe particular areas within the production process where compression wood is likely to cause problems. This study has mainly been carried out as a questionnaire. In order to connect the findings to current research, additional information has also been collected by means of a literature review. The questionnaire has been intended for sawmills and wood-manufacturing companies from various production classes and owner categories, as well as from different parts of the country.

The Swedish cooperative Lantmännen Ekonomiska Förening has initiated a project labelled "Operation Blåljus" that includes an extensive program for closing down elevators. The number of elevators will be reduced from 92 to approximately 15 after harvest of 2007. The objective of Blåljus is to increase the price of grain with 10 öre/kg. A project has been initiated at the Lantmännen Grain division where the purpose is to provide the farmers with support in their decisions and practical advice how they can load a 35 ton grain truck on 30 minutes. The result from the project will serve as a support system to the farmer in his ambition to achieve cost efficient systems to load a truck with grain on the farm.

Today's high oil prices and more stringent environmental requirements have led to that manufacturers of mobile construction equipment try to make their products more energy efficient. With this in mind a project about hybridization of hydraulic systems has been formed. The purpose of this project was to analyze the savings that can be achieved by hybridization of hydraulic systems. A reach stacker truck (Kalmar DRD450-80S4XS) were simulated in some load cases with conventional hydraulic systems and with three types of hybridized hydraulic systems. Different parts of the hydraulic systems were also analyzed separately.

The relation between copyright and the right to privacy is complex and difficulties exist in balancing the rights. Copyright should not be limited. Therefore, to ensure the economic rights of the copyright owners, must the right to privacy instead be limited whenever the two rights collide.The implementation of IPRED into Swedish Law meant a vast change as private operators are able to request information concerning a suspected infringer before as well as during a proceeding concerning an infringement of intellectual property. The chosen implementation method goes beyond IPRED?s requirements and also sanctions a lower standard of proof to grant the requested information.

The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

Many buildings are now nearing the end of their service life. This applies to both the older houses from the 40's and 50's to the million project houses that did not prove to be as sustainable in the long run. Often there is a desire to extend the service lifetime, but to do that you need to make detailed inspections. The Folkets hus in Gävle is one of those buildings that is in need of renovation and to fulfill the new requirements that must be met in today's buildings. It is desired to make the buildings rentable space more attractive and to extend the building with two more floors.

International expansion has long been associated with a positive trend that many companies, regardless of industry, choosing to realize mainly to expand its market share and hence its profitability. Various theories describe differentiated strategies to promote corporate expansion. Either they shall be financed by internal funds, or balancing equity with debt, or only increase leverage in order to achieve the desired results. This study focuses on the Swedish fashion market and its degree of internationalization. The purpose is to attempt to discern whether there exists a correlation between the degree of internationalization and its financial performance.The study was based on a quantitative approach where secondary data was collected so that we then would be able to perform regression calculations.

Purpose: The purpose of the investigation is to give an insight to hot the EU legal environment in the field of vertical relationships influences the competitiveness of the 2nd tier of the automobile industry. Conclusion:It follows that European legislation has succeedded in raising the competitiveness by breaking down the powers of the predominantly more powerful companies that the 2nd tier players do business with and by giving companies sufficient leeway to act. The comment must be made here that serious problems due to a power misbalance might still exist yet are not uncovered. In the course of my research I have found a lack of issues in my subject field. These problems however would have a more structural and economical cause, dealing with these problems would fall outside the boundaries of the competence of European competition legislation.

Is Försäkringskassan, one of Sweden?s largest organizations, an equal place to work in? Dosex, ethnical background or age matter when being treated by colleagues and managers?In this thesis I try to, through interviews with both the Human Resources-departement andsome administrators at Försäkringskassan, find the answers to how the organization?s internalwork regarding equality functions. To help me with the analysis I use both discourse theoryand gender theory. I find a discrepancy between the Human Resources-department?s and theadministrators? view of how the internal equality work is run.