The main purpose of this study is to clarify the underlying reasons as to why people choose to travel by car or taxi, and to do so by using people´s choice of transportation to and from Arlanda Airport as an example. Furthermore it is also in our interest to see what changes are needed to make more travellers use the available public transportation.Because of the increasing pollution rate from the means of conveyance headed to and from Arlanda Airport, Luftfartsverket is attempting to decrease the amount of emission from the connecting transportation sources. Luftfartsverket has a pollution limit which is about to be reached in a few years, based on a prognosis made by Arlanda´s office of environmental issues. In order to investigate people´s travel mode choice a survey was conducted at Arlanda Airport, Stockholm. 82 travellers were interviewed on a three day basis inside terminal 4 and 5.

Studies have shown that air pollution, as well as bark fissure depth and sun exposure of a tree can have an effect on lichen growth as well as abundance of lichen species. The aim of this study was to find out the relative importance of these factors. 211 oaks in south eastern Sweden were surveyed for presence of 17 lichen species, as well as the total number of lichen species. Half of the trees were situated in urban areas and half in the countryside. For each tree the bark fissure depth was measured and the sun exposure of the trunk was estimated.

AbstractMy task was to prepare the already designed heating list ?Stayhot? for manufacturing.I started with drawing the whole list in the CAD-program. It became obvious that some of the designed components had to be changed to work in practice.A turnable reflector couldn?t be combined with the isolation. The suggested light emitting diodes wouldn?t give enough light, so I cut them out and the problem with light remains to be solved.

Gotland is an island with a rich history. One unique thing about it is the picturestones. There are, today, 565 known stones and fragments found on the island of various dating. The dating time spans from 400 ad to 1100 ad. This essay is meant to discuss the dating issue of the early picture stones dated to 400-700 ad and discuss the relevance and validity of the today?s dating.

Stormwater from trafficked areas often contains high pollution levels. In traditional stormwater management design, stormwater is first transported away through piped networks, and then in most cases passes through oil separators before finally reaching the recipients. While this traditional method removes certain pollutants from the stormwater, it does not reduce the total flow, as in the case of ecological stormwater management. In the ecological method the stormwater is not simply transported away, but is recirculated through infiltration, percolation, and detention. The aim of this study is to investigate possible advantages of ecological management designs, in contrast to traditional management.

Successful broiler production in hot climates requires knowledge of how birds are affected by heat stress. It is important with access to water and good ventilation to facilitate coping with the heat. It may be useful to reduce the consumption of feed during the hottest hours of the days, which together with a few hours of extra light available could improve both productivity and animal welfare. The vision in birds is superior to that of humans and most other mammals. Continuous light and light with low intensity can cause eye injuries, affect the eye development in young chicken negatively, as well as provide increased incidence of foot pad lesions. Access to light affects the production but also the welfare of birds.

Gotland is an island with a rich history. One unique thing about it is the picturestones. There are, today, 565 known stones and fragments found on the island of various dating. The dating time spans from 400 ad to 1100 ad. This essay is meant to discuss the dating issue of the early picture stones dated to 400-700 ad and discuss the relevance and validity of the today?s dating.

Companies constantly strive for the perfect order which enables them to satisfy and retain their customers. This is a difficult process that can be facilitated by using different picking technologies. In this study, a research of the picking technologies Pick-to-Light and Pick-to-Voice have been made to investigate when each technology is suited.In order to collect relevant information and data to be able to answer the question formulation, a qualitative study with interviews have been made. The purpose of this essay was to investigate Pick-to-Light and Pick-to-Voice to see when each technology is best suited and to see what the differences between the technologies are. With our essay we wanted to help manufacturing companies to make the right decisions when implementing a picking technology.The results showed that those picking technologies give companies a higher picking quality and an increased work efficiency since the order picking is faster to perform, and that picking errors are reduced.

The EU's Water Framework Directive aims to a long-term and sustainable use of our water resources and wants to ensure good water quality in Europe's water bodies. Discharge of polluted stormwater into receiving waters can be a threat to their ecological and chemical status. Municipalities are responsible for supervision of the environmental quality standards (EQS) and therefore need to gain knowledge of current stormwater management, the expected level of pollution emissions and possible appropriate purification steps to ensure that the goal of good water quality is achieved.This master thesis aims to provide this knowledge in the example case of Vallentunas urban area and wants to prepare future oversight so that it can be assessed how much the discharge of polluted stormwater into the local receiving water is a threat to its status. With the help of maps, aerial photographs, site observations and individual discussions those areas are mapped where appearance of moderate to highly polluted stormwater could be suspected. The degree of pollution at the discharge points is determined based on land use upstream and uses standard values according to the administrators assistance "Tillsyn av dagvatten" (MSL 2014).The study identifies 100 areas in need of supervision regarding their stormwater management.

Deferred shading är en renderingsteknik som har blivit allt mer populär i och med att hårdvaraukraven för tekniken inte längre är ett hinder. Ett problem med deferred shading är fortfarande hur transparenta objekt ska hanteras. Rapporten utvärderar två olika deferred pipelines som hanterar transparent geometri på olika sätt, de två renderingsmetoderna är Inferred Lighting samt Light Pre Pass med framåtrendering för hantering av transparent geometri..

Background: Folate is a water - soluble vitamin necessary for normal DNA synthesis among  other mechanisms. Folate deficiency can cause megaloblastic anemia resulting from abnormal erythrocyte d evelopment. At the Department of Clinical Chemistry, Linköping, analysis of folate is performed with Siemens ADVIA Centaur® XP which uses an immunochemical method with chemiluminimetric detection. Currently, the assay is conducted on serum, is poured off and frozen after 48 h and treated with light protection because folate is considered to be light sensitive.Methods: This study tested lithium heparin plasma for analysis of folate with Siemens ADVIA Centaur® XP with the aim to be able to perform a package of analyzes in anemia investigation from the same collection tube. Furthermore, the stability of folate was studied for up to 168 h and examined regarding light sensitivity.Results: Statistically significant higher values were obtained in the analysis of folate in lithium heparin plasma than folate in serum (p < 0,001).

Use of lighting is crucial to make public urban places available during dark hours. Landscape architects participate in planning of lighting, but during our education there is very little taught on the subject. Through this study we approach the subject of lighting by looking into lighting methods for urban plant materials during winter. In this thesis we look into ways to emphasize the visible characters and experiences of urban plants during winter season using light. Target audience are landscape architect students and landscape architects without knowledge of lighting. The part of the thesis that describe basic conditions for, and visual characters of plants can be useful to lighting designers without knowledge in this subject. Working methods used were the following: ? Pre-study about light and lighting techniques through literature and dialogues. ? Compiling important visual winter plant characters through photography and literature. ? Outdoor light experiments with plants.

The contemporary angel-symbol is deeply rooted in our cultural history, with connotations and implications leading to that inner transitional space where all creative activity takes place. This essay investigates the history of the depiction of angels, visions of angels both ancient and modern, and includes psychological aspects of symbols as such. A closer look at surrounding symbols of angels will hopefully result in a greater understanding of the role of the angel-symbol within the context of visual culture, seen in the light of our own symbolic universe..

The purpose of this master thesis has been to find different solutions to the design of a headlamp with a cluster of three or possibly four high power LEDs (Light Emitting Diodes). During the work, two different problems have been considered; how to design a lens in order to shape the light beam in a desirable way, and how to design a cooling system which will lower the temperature of the LEDs as efficiently as possible, still taking into account the geometry set by the optical solution as well as other given geometries. The results presented in this thesis are partly the outcome of a literature study, but derive mainly from a number of tests and measurements made on two test rigs and one concept prototype..

Active sensors are used a lot in the society and industry, for example to gain better control over processes or to get proximity sensing features in different products. Within industry there is great interest in developing safe automation products that can be controlled with high accuracy but still at a low cost.The goal of this project is to develop a prototype of a non-contact rangefinder that measures distance using infrared light. The sensor is to be used for various applications in industries with relatively high accuracy and be compact, but at a low cost. By implementing a rangefinder into a product, more accurate detections of an object?s presence can be done.In this project a new distance sensor, EPC600 from ESPROS, was used.