The report describes the process of identifying the interference that exists in a newly installed automated robotic cell and suggest improvements to increase productivity. The cell is used for lifting up extruded aluminum sections onto a conveyor which deliver the material to a anodising line at a company that manufactures aluminum extrusions.To find the areas with the best possibility for improvements in the cell we used a variety of job measurements e.g. measure of standard times for each operation in the cell. The core of the report is a study of the robots.One reason for this study is that the robots do not reach the productivity they were purchased to. The main cause not reaching the productivity is the visionsystem.

In this study I have examined how narrative techniques can be used to promote the reading value and readability in information. My focus has been on the communication-agency Mandoly?s information-brochure which function is to inform other companies about their own potential for development in collaboration with Mandoly. The purpose with this study is to examine how it is possible to increase the reading value in order to engage the target group. In my study I have used four methods: analysis of Mandoly?s old information-brochure, literature studies, a qualitative interview, and an user test.

Enligt rapporter från Arbetsmiljöverket är arbetsrelaterade besvär som inte beror på arbetsplatsolycka vanliga inom trädgårdsnäringen. Orsakerna till besvären är huvudsakligen en följd av påfrestande arbetsställningar, korta upprepade arbetsmoment och tung manuell hantering. Syftet med denna litteraturstudie var att beskriva vad trädgårdsmästare bör tänka på vad gäller belastningsergonomi för att minska risken för skador i sitt arbete. Sökningar gjordes i databaserna Medline via PubMed, ScienceDirect och Academic Search Elite med sökorden horticulture, gardening, agriculture, ergonomics, pruning, shoveling, stoop, lifting technique and musculoskeletal injuries.Resultatet visade att när det gäller lyftteknik och arbetsställningar bör man i möjligaste mån undvika att utföra dessa med en framåtböjd överkropp och raka ben. Denna kroppshållning visade sig vara sämre i jämförelse med andra tekniker och kroppspositioner med hänsyn taget till påfrestningsgraden av ländryggen.Även vid grävning finns per automatik ett starkt inslag av att luta sig fram med böjd överkropp med den följden att ryggen utsätts för krafter som kan vara skadliga.

This thesis was performed at Zetterbergs Industri AB. Zetterbergs is designing, building and mounts body systems for trucks, including dumpers and tippers. The assignment for the thesis was to design a door hinge for a spreader gate. The spreader gate is the top of the two tailgates on a dumper or tipper and opens back and outwards when tipping the cargo. The spreader gate controls the mass flow of the material being tipped.

In this study I have examined how narrative techniques can be used to promote the reading value and readability in information. My focus has been on the communication-agency Mandoly?s information-brochure which function is to inform other companies about their own potential for development in collaboration with Mandoly. The purpose with this study is to examine how it is possible to increase the reading value in order to engage the target group. In my study I have used four methods: analysis of Mandoly?s old information-brochure, literature studies, a qualitative interview, and an user test.

This is a degree project performed at Halmstad University in Sweden on the subject carpet ofreinforcement. This project is developed in association with Celsa Steel Service in Halmstad.The purpose of this report is to investigate how much time that can be saved if carpet ofreinforcement is used instead of the traditional way to work with reinforcement and seewhat kind of parameters that is important between the choices. We are also going to seehow this product affects the situation for reinforcement workers from an ergonomic point ofview.Carpet of reinforcement is made by straight reinforcement?s bars that are welded togetherwith steel bands. These rolls are made at a factory with a machine that welds together thebars in determined centre distance, with desired dimensions after the constructionengineers? blueprints.

In my project I have collaborated with Linda Larson, who is the creator behind the fashion brand Elveel. The goal was to produce an identity and a graphic profile for Elveel. The aim was that the graphic profile would act as an extension of the clothes aesthetics. I wanted to explore if I by different folding and cutting techniques, in tags and packaging, could reflect the details of the clothes expression. But also how different design elements can reflect the story behind the clothes.

The thesis examined whether there is a distinct boundary between art and advertising. The collected data showed how art and advertising are linked to each other and also differ from each other, in particular through the latter half of the 1900?s. What was happening in society came to have great impact on what happened in art and advertising. In postwar Germany, capitalism realism evolved from the German pop art where the art was removed from the art gallery and placed on the streets where the people were, in an era that was characterized by a gap between the rich and the poor.

Enligt rapporter från Arbetsmiljöverket är arbetsrelaterade besvär som inte beror på arbetsplatsolycka vanliga inom trädgårdsnäringen. Orsakerna till besvären är huvudsakligen en följd av påfrestande arbetsställningar, korta upprepade arbetsmoment och tung manuell hantering. Syftet med denna litteraturstudie var att beskriva vad trädgårdsmästare bör tänka på vad gäller belastningsergonomi för att minska risken för skador i sitt arbete. Sökningar gjordes i databaserna Medline via PubMed, ScienceDirect och Academic Search Elite med sökorden horticulture, gardening, agriculture, ergonomics, pruning, shoveling, stoop, lifting technique and musculoskeletal injuries.Resultatet visade att när det gäller lyftteknik och arbetsställningar bör man i möjligaste mån undvika att utföra dessa med en framåtböjd överkropp och raka ben. Denna kroppshållning visade sig vara sämre i jämförelse med andra tekniker och kroppspositioner med hänsyn taget till påfrestningsgraden av ländryggen.Även vid grävning finns per automatik ett starkt inslag av att luta sig fram med böjd överkropp med den följden att ryggen utsätts för krafter som kan vara skadliga.

This thesis is performed as a summarizing project for the mechanical engineering education at School of Engineering in Jönköping. All knowledge necessary to complete this thesis was gathered from previous courses and education.This project was to develop a new product for the company TR Equipment AB in Tranås. The new product is going to be based on an already existing product, TR 1700. TR 1700 is a bathtub equipped with a height adjustable function. This product is used in retirement homes and in the care of disabled people.

The guest harbor on Utö, Utö Gästhamn, is currently using electricity for heating all of the water used in the showers and taps. Because of the large amount of visitors, especially during the summer months, the hot water usage gets very high and that is also the case for the electrical bills. During the year of 2011 the cost of electricity for Utö Gästhamn reached a total of 257 500 kr. Out of these 257 500 kr approximately 142 000 kr, 55 % of the total cost, were because of the water heating.The report is the result of a cooperation with Skärgårdsstiftelsen, the Green Islands-project and Utö Gästhamn where the mutual goal is to dimension a solar energy system, to promote the sustainable development.Initially the different techniques for the solar energy system are researched. The techniques are plane solar collectors, evacuated tube collectors, pool collectors and photovoltaic cells.

The main purpose of this essay is to investigate professional artists experience of the need and use of information in their creative work. I have collected the material through qualitative interviews with four professional artist working with different materials and techniques. One of the results of the study is that the artists first of all used information as a source of inspiration in their creative work. They gathered their information from various scources, for example; pictures, exhibitions, visual arts, books and novells, depending on what project they are working with. Other important information scources were colleges, especially for the technical information need.

This essay brings up how experienced texture artists in game development can get comfortable in their workflow and therefore not spend time on learning new techniques that in the end could be more efficient. We base this on theories that people often choose the path of least resistance, which in the case of an experienced texture artist would be the path they have learned and are comfortable with. We also talk about the popularity of Photoshop and that many of today?s texture artists in the game industry are using it and that this could be because Photoshop was one of the first programs that could be used well for texturing. Because of this many learned to use it and stuck by it and then taught Photoshop to new texture artists because that is the program that they know.

The usage of Unmanned Aerial Vehicles (UAV) for several applications has in-creased during the past years. One of the possible applications are aerial imagecapturing for detection and surveillance purposes. In order to make the captur-ing process more efficient, multiple, cameraequipped UAV:s could fly in a for-mation and as a result cover a larger area. To be able to receive several imagesequences and stitch those together, resulting in a panoramavideo, a softwareapplication has been developed and tested for this purpose.All functionality are developed in the language C++ by using the software li-brary OpenCV. All implementations of different techniques and methods hasbeen done as generic as possible to be able to add functionality in the future.Common methods in computervision and object recognition such as SIFT, SURF and RANSAC have been tested..

This is a pattern project for textiles, with main purpose to develop and challenge my design process and to experiment with a mix of different printing techniques. The goal of the project was to create three textile individuals as representatives of my experiments, inspired by natural surfaces.The world of fashion have been an inspiration and has been the model for these textiles, with its powerful and playful patterns. With the world of fashion as a model, I also chose to work with the materials habotai silk and silk velvet. The qualities of these materials has also been influential in my design language.The work has been very focused on experiementation and exploration, and resulted in three printed fabrics that I have chosen to call Björkalm, Lindstam and Lavbädd..