This thesis was performed at Zetterbergs Industri AB. Zetterbergs is designing, building and mounts body systems for trucks, including dumpers and tippers. The assignment for the thesis was to design a door hinge for a spreader gate. The spreader gate is the top of the two tailgates on a dumper or tipper and opens back and outwards when tipping the cargo. The spreader gate controls the mass flow of the material being tipped.

This is a degree project performed at Halmstad University in Sweden on the subject carpet ofreinforcement. This project is developed in association with Celsa Steel Service in Halmstad.The purpose of this report is to investigate how much time that can be saved if carpet ofreinforcement is used instead of the traditional way to work with reinforcement and seewhat kind of parameters that is important between the choices. We are also going to seehow this product affects the situation for reinforcement workers from an ergonomic point ofview.Carpet of reinforcement is made by straight reinforcement?s bars that are welded togetherwith steel bands. These rolls are made at a factory with a machine that welds together thebars in determined centre distance, with desired dimensions after the constructionengineers? blueprints.

Enligt rapporter från Arbetsmiljöverket är arbetsrelaterade besvär som inte beror på arbetsplatsolycka vanliga inom trädgårdsnäringen. Orsakerna till besvären är huvudsakligen en följd av påfrestande arbetsställningar, korta upprepade arbetsmoment och tung manuell hantering. Syftet med denna litteraturstudie var att beskriva vad trädgårdsmästare bör tänka på vad gäller belastningsergonomi för att minska risken för skador i sitt arbete. Sökningar gjordes i databaserna Medline via PubMed, ScienceDirect och Academic Search Elite med sökorden horticulture, gardening, agriculture, ergonomics, pruning, shoveling, stoop, lifting technique and musculoskeletal injuries.Resultatet visade att när det gäller lyftteknik och arbetsställningar bör man i möjligaste mån undvika att utföra dessa med en framåtböjd överkropp och raka ben. Denna kroppshållning visade sig vara sämre i jämförelse med andra tekniker och kroppspositioner med hänsyn taget till påfrestningsgraden av ländryggen.Även vid grävning finns per automatik ett starkt inslag av att luta sig fram med böjd överkropp med den följden att ryggen utsätts för krafter som kan vara skadliga.

This thesis is performed as a summarizing project for the mechanical engineering education at School of Engineering in Jönköping. All knowledge necessary to complete this thesis was gathered from previous courses and education.This project was to develop a new product for the company TR Equipment AB in Tranås. The new product is going to be based on an already existing product, TR 1700. TR 1700 is a bathtub equipped with a height adjustable function. This product is used in retirement homes and in the care of disabled people.

Bakgrund: Fall är den vanligaste orsaken till varför personer 65 år och äldre skadar sig. Orsaken kan t ex vara nedsatt balans- och benmuskelstyrka. Balans- och styrketräning för nedre extremiteterna kan avsevärt minska förekomsten av fallhändelser. Syfte: Syftet med litteraturstudien var att klargöra vilka metoder som används för personer i åldersgruppen 65 år och äldre med avsikten att förbättra balans, benmuskelstyrka, gång- och förflyttningsförmåga och därmed minska risken för fall. Metod: Litteratursökning utfördes i de medicinska databaserna PubMed, CINAHL och Proquest.

Volvo Construction Equipment is a world leading company in construction machinery. Tomaintain the best products, development is prioritized. The master thesis regards sound reductionof the hydraulic system on a wheel loader. The background to the master thesis is asimulation made on the hydraulic system, performed autumn 2005. The result of the simulationshows that the energy of the pressure ripple is reduced when the paralleled hydraulicpumps are phase shifted and reduces each others pump pulsations.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

Under höstterminen 2013 har Stefan Erlandsson och Louise Andersson, designingenjörsstudenter på Högskolan i Skövde, utfört ett produktutvecklingsprojekt i samarbete med entreprenören Lars Willebrand. Målsättningen för projektet var att utveckla ett lyftverktyg som ska komplettera Willebrands produktserie bestående av; travers, svängkran, plåtbyrå och lyftverktyg. Lyftverktyget ska vara anpassat för att användas i kombination med en plåtbyrå, vilket innebär att det kommer användas till att lyfta material från höga och låga höjder. Lyftverktyget måste därmed konstrueras i syfte att underlätta för användaren och undvika arbetsskador som kan uppstå vid dessa lyft. Lyftverktyget ska även kunna anpassas till kunder som endast avser att lyfta skivformade produkter i midjehöjd.Projektet inleds med en förstudie där mycket fokus läggs på ergonomi och användaren.

This paper is based on a literature review and interviews made with managers in small-scale nurseries for pot plant production. The review helped to identify the worst occupational hazards in pot plant production. The interviews provided a way to investigate how the nurseries act so as to avoid the worst hazards and what they do to even out work intensive periods during the season in order to get a more even distribution of work over the year. According to available statistics problems with back and shoulders are the most common of the physical disorders and the risk for occupational accidents are high for greenhouse workers. Most of the occupational injuries are connected to musculoskeletal problems. The handling of material is often manual and involves frequent lifting and carrying of heavy loads, the strenuous work postures and static muscular tensions these repetitive tasks are associated with causes straining and overloading.

This essay deals with the support and help offered to elderly people over 65 with mental disabilities out of personnel from a special support team. We have chosen to use the qualitative method to answer our questions. We have four semi-structured interviews with all staff from the support team we have been in contact with, three nurses/nursing assistants and project manager for the support team. We have recognized five themes and divided the text into six different categories and disciplines that answers and highlights the importance of meeting clients' needs, increase their independence and quality of life. Our theme is security, continuity, time, treatment and relations.

This thesis has been performed at BAE Systems Hägglunds, which is located in Örnsköldsvik. Hägglunds has a wide background of engineering, where they have manufactured all from airplanes to lifting cranes. Currently they only produce track vehicles at Hägglunds, where they manufacture the CV90 and BVS10 models. This thesis concerns the BVS10 which is an all-terrain-vehicle. The main purpose with the BVS10 is to enable transportation of material and personnel thru tough terrain.

A large part of the interactions between horse and rider during horseback riding takes place through the reins and the bit and devices for measuring the tension on the reins, rein tension meters, has fairly recently been developed. To safeguard the welfare of the ridden horse riders need to be aware of the rein tension they apply and actively work to decrease it. Furthermore, there is a need to develop the study of rein tension through new techniques and refined analysis procedures. A good-quality rein tension meter should be small in size, sensitive, durable and as accurate for light rein tension as for strong forces. Rein tension meters used in research on horse and rider interaction commonly depend on strain gauge technique for generating rein tension data.

This thesis purpose was to contribute to knowledge which could explain the driving forces behind Corporate Social Responsibility in corporate Sweden and their strategic impact from a management perspective. The method used to archive this research was a qualitative interpretative study conducted by interviews. The thesis is based on descriptive theories of drivers for CSR, concepts of strategy and CSR and normative/instrumental theories suggesting a strategic approach to CSR and stakeholder management. The empirical study is based on interviews with Swedish business managers in a strategic board position as well as consultants working with CSR strategies, supported with internet information from companies? webpage.