There is a new beverage container on the market, a bottle made out of pure aluminum as a replacement for the traditional container made out of glass. This new container has the potential to reduce both cost and pollution during transportation, the lighter and stronger construction has every advantage compared to the old one in glass. The new container has every possibility to make it on the market. Some of the biggest brands within the soft drink market already use these bottles in countries without any recycling demands like: Coca-Cola, Heineken and Pepsi. The only thing stopping these brands from the Swedish market is the lack of a functional return system, there is only one company that uses the bottle in Sweden today and they take care of their own used bottles.

This report examines the prerequisites for LEDs to replace other technologies indifferent applications. How does the different technologies for light generationwork and what are the advantages and disadvantages? The various technologieslimitations and characteristics provides the opportunities for the LEDs.This report describes a test-construction built to examine what practical arrangementscan be built with modern light emitting diodes, in order to showsome of the possibilities. The construction consists of three different applications,a high power lamp based on cold white LEDs, one based on warm whiteLEDs for the evaluation of the light characteristics and a RGB-LED based lampable to mix any colors quickly and seamlessly. The test construction also containsthe essential peripherals including control-electronics, optics and a custombuilt watercooling solution.The potential for LEDs is huge but it is complicated to build LED based applicationsdue to the limitations which mainly includes the electronics and theneccesary cooling.

An increasing number of heat pump producers have developed heat pumps that can be connected to solar panels. In this thesis we have examined the possibilities of connecting solar panels to existing ground source- and geothermal heat pumps that has not been adapted to solar panels. During the work process, a prototype plant has been built to compare our theory with the practical results and with our designed sizing tool. The work has rendered in knowledge that will be used to build a sun module that can be easily connect to the existing heat pump system. The existing heat pump, our test plant, has been supplemented by an advanced storage tank used to allow different operating modes.

Företag: Midelfart Sonesson ABSyfte: Studien skulle ge en bild av vilka kriterier som är betydelsefulla för företag vid rationalisering av lagerställen. Den skulle dessutom ge en bild av vilka tänkbara ekonomiska konsekvenser som kan följa efter en rationalisering. Genom en fallstudie av ett typföretag och genom kompletterande intervjuer med kunniga inom logistik och företagsekonomi skulle författarna undersöka vilka kriterier som företagen lägger mest vikt på när de ska starta ett så stort projekt som lagerställesrationalisering, samt förstå vad kostnadsbesparingen kan bli.Metod: En studie av företaget Midelfart Sonesson AB har utförts. Primär- och sekundärdata har samlats in genom personliga intervjuer, litteratur, rapporter, och elektroniska källor.Teori: Teorin består av nio olika avsnitt som kan tillämpas på ämnet i uppsatsen. Teorin används för att förstå företagets uppbyggnad, organisation och dess handlande.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The purpose of thesis was to investigate and compare how two companies within pharmaceutical industry and nuclear power industry are currently working with quality development regarding continuous improvement and Lessons Learned in business processes. In addition, a simple comparison was made with the automotiveindustry.McNeil AB are improving their processes continuously and are according to the findings of this report performing well in their pursuit of world-class pharmaceutical production. They have a well functioning process regarding improvements proposed in weekly improvement meetings engaging all employees. However, during interviews it was made clear that the functionality of the process which administer improvement proposals generated in addition to, or beside the weekly improvement meetings, were inadequate. McNeil AB is proposed to administer this through an IT solution instead of by paper and e-mail, that simplifies the process of adding, implementing and follow up an improvement proposal.The nuclear power plant Ringhals AB recently made major improvements in their business processes as well as the plant itself.

This thesis examines how marketing by secondhand apps affects young adult women's consumption habits, investigating whether these platforms promote or counteract overconsumption. While the secondhand market is considered more sustainable than buying new, these apps may still encourage overconsumption. The study focuses on the marketing strategies of three major secondhand apps in Sweden: Tradera, Sellpy, and Vinted, analyzing their impact on consumer behavior using the AIDA model (Attention, Interest, Desire, Action). Based on qualitative interviews with eleven women aged 20-27 and the authors observations of the apps marketing activities, the study finds that secondhand apps often emphasize environmental benefits and makes secondhand shopping accessible and appealing. However, the marketing tactics used by these apps, including frequent push notifications, targeted advertisements, and influencer collaborations, may lead to increased consumption. Overconsumption causes significant environmental damage, and while the secondhand market can mitigate these effects by extending the lifecycle of items, the emphasis on convenience end environmental benefits can inadvertently encourage more consumption. The study concludes that secondhand apps play a complex role in consumer behavior, balancing the potential for sustainability with the risk of promoting overconsumption.

Pontarius AB har tillsammans med Göteborgs Hamn AB identifierat behovet av en utvecklad holistisk modell för bedömning av investeringar i terminalytor. För detta har en första ansats gjorts med den interna livscykelkostnadsanalysmodellen Total Cost of Ownership and Operations (TCOO). Livscykelkostnadsanalys (LCCA) är ett verktyg för att handskas med ett projekts totala kostnader vid investeringsbeslut och bedömning av alternativ. Generella livscykelkostnads-modeller är svåra att ta fram, varför istället utförliga modeller vanligen skapas för specifika områden. För vägbeläggningar, och tillviss del flygplatsbeläggningar, finns utförliga sådana metoder, men för beläggningar i containerterminaler saknas det.För att fortsätta utveckling mot en bättre bedömningsmodell för terminalytor syftade studien till att identifiera kostnadsparametrar som sett ur ett livscykelperspektiv påverkar kostnaderna för containerhamnterminalytor.

In recent years, existing solutions for cooling personal computer CPUs have been supplemented by a new product category, factory sealed water cooling loops. These systems, consisting of a water block with an integrated pump, a fan and a radiator, perform well compared to the air cooling solutions but are less effective than larger, custom-built water cooling systems.This project aims to explore the most important aspects of a factory sealed system and to identify possible cost-effective enhancements of the performance.The most significant differences between the different groups of water cooling loops are the block design and the pumping power. The performance of both categories is also largely dependent on the fan power, but increasing fan power has a large negative impact on the noise level.Both radiator size and fan model choice appear, in tests, to be relatively unimportant, presuming that the noise level is kept constant. The position and direction of the fan, however, has significant impact on both the temperature and the sound level.Water blocks can be designed in several different ways, both regarding the heatsink design and the flow direction. In simulation, flow with the inlet centered above the heatsink result in considerably lower pressure drop and slightly higher temperatures than flow through the block, for heatsinks with fin arrays.Creating a competitive product in this product segment certainly seems possible, as there are performance-increasing changes to be made that seemingly has little impact on the production cost.

Each year, the coffee machines at Ericsson in Kista produce around 100 tons of ground coffee waste.The companies Coor Service Management, Löfbergs Lila and Selecta are all responsible for differentstages in the logistical chain in delivering coffee and, together with Ericsson, they want to increasetheir environmental benefit. The plan is to produce biogas through anaerobic digestion instead ofincinerating the coffee waste in a heating plant. The results are to be presented as different businesscases in which different biogas plants are compared with the reference case (heating plant),comparing costs and environmental impacts.There are two major environmental benefits from producing biogas; reduced carbon dioxideemissions from when fossile fule is replaced by carbon neutral biogas, and reduced emissions fromreturning digestate from the bio reactor to farmland instead of using industrial fertelizer.In order to determine the biogas potential in coffee waste, a couple of properties had to bedetermined in a laboratory. Properties such as the dry substance content, heating value, moisturecontent and ash content. The results show that 100 tons coffee waste could produce around 16 500Nm3 biogas which would contain 163 MWh.The biogas reactor and upgrade plant both need energy gas to function and uses around 14 MWh ofthe produced gas.

Theft without break-ins has increased significantly in the last year of swimming, sports and leisure facilities in Karlskrona, more precisely 60%. Vandalism in the shape of graffiti is another common crime. The solutions are divided into social and situational crime prevention. Social crime prevention engage in actions that are based on social causes of crime rather than the opposite situational crime prevention, which instead assumes that discourage with the help of technical solutions and has as primary objective to hinder accessibility for example theft friendly goods. The main purpose of this work is to come up with solutions to prevent these crimes, while also being cost-effective and realistic to implement. The work is important in that it creates safety awareness and promotes a healthy safety culture. Moreover, the future goal is to lower these statistics. The goal of the work is in addition to developing our knowledge of crime subject, was also to provide help and solutions for our clients.

Den här uppsatsen är skriven på uppdrag av GrenseTjänsten Morukulien, vilken är en organisation som hjälper personer, företag och andra organisationer som har ärenden i både Sverige och Norge.Syftet med uppsatsen är att jämföra levnadskostnaderna för en tvåbarnsfamilj i Arvika- och Kongsvinger Kommun. Detta görs genom att se vilken familj som har störst köpkraft. Med köpkraft menas hur mycket man kan konsumera för sin disponibla inkomst.Levnadskostnaderna jämförs för en genomsnittlig tvåbarnsfamilj. Undersökningen bygger på att alla kostnader läggs i boendelandet. Vidare utgås det ifrån att båda familjerna har samma konsumtionsbeteende som en genomsnittlig svensk tvåbarnsfamilj med jämförbar inkomst.

This study was carried out as a commission from Holmen Skog, district ?Egen skog? in Norrköping. During October 2006 several stands were inventoried by aerial photos from helicopter. The stands were those for which the next action proposed was plant inventory or plant check. The photos were interpreted and the number of stems was calculated.

Background: The standard of living should be the same for everyone, whether the apartment is placed in an old or new building. The residential properties that were built from 1965 until 1974 is now beginning to become old and in need of restoration. The financial crisis during the nineties contributed to the lack of maintenance on the buildings in Sweden. As the public buildings gets older more and more defects occurs. The coordination and maintenance will therefore have a more significant role in the housing company ?s work.The increasing interest about how old a building can be, attract much attention.

Background: Oil is the most dominating source of energy of today, it constitutes for more than 40 per cent of the worlds total energy consumption. This together with the fact that stock in oil companies has soared on the stock exchanges around the world makes oil a very interesting topic to write within. In order to gain knowledge in how to value oil companies, the authors will collect information from theory and through a questionnaire. By applying the information gathered to three companies listed on the Stockholm Stock Exchange the authors will reach an objective picture of valuation of oil companies.Purpose: To investigate how shares of stock are valuated in the oil exploring and producing industry, and what specific measures and metrics that are used in the valuation of stocks in Exploring and Producing (E&P) companies.Method: By using a qualitative approach for this thesis, the authors will investigate how the valuation of oil companies works and what measures that should be applied. The authors will use a part descriptive and part explorative study.