I denna rapport har det utförts två fallstudier från två olika vindkraftsanläggningar och med hjälp av en utarbetad modell har livscykelkostnaderna jämförts för de två fallstudierna.Resultatet visade att livscykelkostnaden per producerad kWh sjunker allteftersom den installerade effekten blir högre.Kostnadsmodellen som utarbetats och tillämpats för resultaten har visat sig ha hög verifierbarhet då resultaten har varit jämförbara med litterära studier..

When I got the opportunity to write this examination did I want to write about something that I both was interest in and also can use in the future. I think it?s going to be difficult to carry on the milk production with only 28 cows. I wanted to investigate the possibility to increase the herd of cows. I also wanted to compare this cost with a new cow house the cows where milked with a robot.

The purpose of this thesis is to analyse and propose improvements to the cost accounting system in use at an airline operating on the Swedish market. The choice of study object is based on the airline?s desire to have its cost accounting system evaluated. During the analysis we have identified a number of points where the current cost accounting system does not correspond to its intended purpose. These points include significant groups of costs not being considered in the current system, potential over capacity is not visible and logic connections between distribution keys and the use of resources are sometimes lacking.

The efficacy of screening for breast cancer with mammography has been a subject of controversy during the last decades. However, the general opinion is now that screening reduces mortality in breast cancer (Zackrisson, 2006). It is nevertheless important to weigh the efficacy against the harm and costs associated with screening. Cost-utility and cost-effectiveness analysis of screening have generally failed to incorporate side effects such as anxiety and discomfort related to screening tests and the following diagnostic tests (Gyrd-Hansen, 2000). This study seeks to include such side effects in a cost-utility analysis.

Alkohol är en del av vardagen för många svenskar idag. När denna konsumtion övergår till ett missbruk uppstår det problem för individen och för samhället som stort. I denna studie har författarna genomfört en Cost of Illness studie för att beräkna samhällskostnaderna för alkoholmissbruket inom Hammarö kommun.Resultatet visar att kostnaden för samhället som helhet, för detta missbruk uppgår till 29 434 297 SEK, år 2013. Den största kostnadsbäraren är staten med sina 15 967 819 SEK av den totala kostnaden. Kommunen står för 10 230 270 SEK av den totala kostnaden.

Introduction: Every year about 450 women in Sweden are diagnosed with cervical cancer, almost 200 die and thousands undergo surgery because of cell changes in the cervix. A HPV infection can lead to cervical cancer and therefor costs for the society. The implementation of a vaccination program against HPV is a way to avoid these costs. Aim: The study aimed to calculate the economic impact of the HPV- vaccination program for children in Sweden through a cost-benefit analysis. Method: In this analysis, status quo was compared with non-administration of the HPV-vaccine for the selected cohort of ten-years-old girls in Sweden.

Globaliseringen innebär ökad konkurrens för företag vilket gör det viktigare för företag att snabbt kunna utföra sina kostnadsuppskattningar. I detta arbete undersöks förutsättningarna för att använda moderna teorier inom cost engineering för att kunna förkorta ledtiderna vid förkalkylsarbetet för företag inom custom made-tillverkning. Inom cost engineering har teorier för kostnadsuppskattning används för att beräkna tillverkningstider för tre olika produkter hos ett fallföretag. För att få en bra beskrivning av problematiken med kostnadsuppskattning inom custom made-tillverkning har design science-metodologi använts under arbetets gång.  Resultatet av arbetet visar att förutsättningarna för att använda moderna teorier inom cost engineering för kostnadsuppskattning hos custom made-tillverkande företag är att historisk data avseende för- och efterkalkylsarbete finns tillgänglig.

This thesis explores some issues regarding estimations of the cost of capital on the Stockholm Stock Exchange through reverse engineering of the Residual Income Valuation model and through usage of the Capital Asset Pricing Model. Previous studies are in conflict of whether the risk premium changes considerably over time or not. Furthermore, the risk premium estimated by CAPM tends to be fairly stable. In this study, reverse engineering of the cost of capital implied by analysts? forecasts shows a significant difference in the risk premium over time.

In Sweden the real estate sector accounts for 33 % of energy consumption and just below 10 % of the emission of carbon dioxide. As a consequence of the external pressure from climate change it?s in everybody?s interest to reduce the energy consumption and thus reduce the emission of carbon dioxide. An additional incentive to reduce the energy consumption is the substantial increase of the energy price since the deregulation of the electricity market in 1996.In this study the techniques that exist to build multi-storey residential buildings with high energy performance will be investigated. Further the study intends to investigate the optimal energy performance from a real estate economic perspective.In order to investigate the optimal energy performance a model has been created with the parameters investment cost, rental revenues, operation and maintenance cost, discount rate and investment horizon.The result shows a relationship between a high investment cost and a high energy performance for newly constructed multi-storey residential buildings.

The purpose of this thesis is to analyze and propose improvements to the current procedure for cost estimations of purchased maintenance work at Banverket, the Swedish rail administration. This governmental institution is responsible for the procurement of maintenance services for the country?s railroad network through open tenders. Due to the generally low number of contractors, it is particularly necessary to establish accurate cost estimates in order to assess the offers and ensure that a fair price is being paid to the suppliers. Several flaws associated with the current practice are identified and analyzed according to cost accounting theories.

The Armed Forces is looking to improve control of where articles are and the monitoring of their condition within its clothing supply. That is why Försvarets Materielverk is working on a motion to tag the Armed Forces clothing with passive RFID-tags. A cost/benefit analysis has been made in this report in order to find out whether the investment is economical justifiable and what costs and benefits arose. The analysis tool that was used is based on the PENG-model. The analysis had three scenarios with the difference that each scenario included various amounts of clothing to tag.  There has also been made an analysis where only the benefits regarding decreasing amount of lost clothes and simplified inventory were included.The result of the first analysis was that none of the scenarios was profitable during the first year.

At a manufacturing company, due to the competition the price is reducedtowards the manufacturing cost. Therefore it is important to maintain control ofones costs and keep calculations up-to-date.This thesis deals with cost accounting at a aluminium-processing company. The report focuses on calculating machine cost per hour since the manufacturing costs are the major part of the total product cost.Managers on the company believe that the costs they use in calculations todayneither is up-to-date nor advantageous in a market aspect and due to that their calculations need to be revised. The machines cost per hour is a major part in the manufacturing calculation. The company wants to provide a competitive price that also covers their costs.

Abstract Title: Total Cost of Ownership ? Revealing the true cost of owning and operating equipment. Authors: Anna Bladh Anna Ström Tutors: Michaela Boye, Parts and Service, PTD, Alfa Laval Göran Berg, Parts and Service, PTD, Alfa LavalCharlotta Johnsson, Department of Automatic Control, LTH, Lund UniversityBertil I. Nilsson, Department of Industrial Management and Logistics, LTH, Lund UniversityCarl-Henric Nilsson, Department of Business Administration, Lund University Core issue: ?Which costs should be included in a general Total Cost of Ownership model regarding centrifuges, and what input variables are needed in order to calculate those costs in a user-friendly way and with a maintained level of accuracy?? Purpose: The theoretical purpose of the thesis is to identify the cost items that have the greatest impact on a TCO calculation for a centrifuge.

Our employer Camatec Industriteknik AB gave us the assignments to increase theirs range of versions on Camcoil that is their own patent product. Camcoil is a capstan system that is used when steel band fabricated. Exist for example in production lines their steel band should be annealed. Our goal with this work is to come up with a completed production basis on a Camcoil for heavy industry. The basis should contain calculations, 3D-constructions, drawings and cost proposal on manufacturing and detail purchase.Demands on this project:1.

Since the 1980s, companies have taken a larger interest in quality and it´s economic impact within the company. Having the knowledge that it´s not quality that costs money, but it´s rather the lack of quality. The work immerses itself in the field of cost of poor quality and the development of key performance indicators.The thesis is performed at Bufab Holding in Värnamo. Bufab Holding is a trading company which mainly buys and sells C-parts. C-parts include fasteners, other small metal-, rubber- or plastic parts such as wires, springs and electronic fasteners.The aim of this thesis was to make a survey of the cost of poor quality and to find key performance indicators (KPI) for cost of poor quality that can be continuously monitored.