HemoCue AB is a multinational corporation targeted on manufacturing point-of-care analysisinstruments for medical treatment. Their main product, the DM 201, is outdated and has bigissues gaining new market shares. For example, no medical treatment center in Sweden usesDM 201 frequently. The project of developing a new instrument to replace it was assignedtwo students at the development engineering program at Halmstad University. The projectalso included integration of the new platform for DM 202 to HemoCue AB:s remainingproducts.The project began by defining the different technical areas concerned.

This paper investigates the internal product costing system in one of the Swedish banks with the purpose to evaluate the quality of its product costs and possible implications on decision making. The study shows that the current system distorts product costs by, among other things, using relative allocation of costs and time and by allocating all costs to individual units of products. We therefore propose an alternative product costing system, which mainly draws on ABC theory but is also adapted to the specific needs of service companies and of the Bank. This proposal is intended as a solution in this particular case and not to be generalized in other contexts. We hope however to add to the understanding of why more complex costing systems, such as the ones based on ABC theory are, according to previous studies, not widely used in practice.

We have a business proposal. Instead of the consumers visit the country side in order to purshase we are interested in starting a shop with only regional produced products in the city. We have our base in a part of Sweden called Östergötland, therefore we have investigated the market for such a store in Östergötlands biggest city, called Linköping. The conclusion is that the store must sell food produced in the region. Another conlusion is that the store must be located near a bigger supermarket. Our main selling points are quality and that the food is produced in the near region.

Lean production härstammar från företaget Toyota och Taiichi Ohno?s begrepp ToyotaProduction System. Metoden är idag ett dominerande styrmedel bland organisationer. Därmedhar konceptet implementerats i allt fler västerländska resultatstyrda organisationer, varsparametrar för kontroll skiljer sig mot de lean production utgår från. Dess innebörd sträckersig över stora delar av en organisation, vilket bidrar till begreppets komplexitet.

Detta examensarbete har utförts på uppdrag av Koenigsegg Automotive AB, som utvecklar, tillverkar och säljer högpresterande sportbilar. Företaget erbjuder fälgar tillverkade helt i kolfiberkomposit, som ger betydande viktbesparingar i jämförelse med traditionella metallfälgar.Efter tillverkningen kräver fälgarna viss bearbetning vid anläggningsytan mellan fälg och däck. Syftet med examensarbetet har varit att undersöka möjligheten att utföra bearbetningen av fälgarna in-house i Ängelholm, och målet har varit att konstruera en maskin för detta ändamål.Projektet inleddes med en litteratursökning, där svårigheter och möjligheter gällande bearbetning av kolfiberkompositer undersöktes. Till följd av de undersökningar som gjordes, valdes bearbetningsmetoden svarvfräsning och ett antal konstuktionskoncept genererades. Genom ett antal utvärderingar utvecklades ett speciellt koncept vidare till ett komplett produktförslag.Produktförslaget är komplett med analyser, beräkningar samt tillverkningsunderlag, som ger uppdragsgivaren bättre insikt i sina möjligheter.

Edsbyverken Office Furniture has over the past 100 years been producing delicate carpentry products, chairs and skiis, but more recently the focus has shifted to furniture for the modern office environment. With a wide selection of products and its characteristic neutral design, Edsbyverken has an extensive group of clients both in Sweden and internationally. The aim of my C level thesis project was to examine the materials Edsbyverken is currently using in order to develop new designs or product functions. Simultanesously, I also wanted to verify whether the method I developed for this project - to initially undertake a comprehensive study of the chosen materials and thereafter specialise on a certain product and target audience ? was effective and successful.

Prefabricering av betongväggar kan förbättras med hjälp av leanprinciper, men det kräver att både leanmetoderna och produktionssystemet utvecklas. Prefabricering innebär förtillverkning av betongprodukter i fabriksmiljö innan de transporteras till byggplatsen för montering till en färdig byggnad. I betonggjuteriindustrin har implementeringen av lean produktion inte varit lika utbredd som exempelvis i fordonsindustrin. En anledning är att kunskapen om leanfilosofin inte är lika vedertagen och att forskningen inte intresserat sig för detta område i särskilt stor omfattning. Lean produktion är en av de mest etablerade och använda produktionsfilosofierna.

Consumer involvement in the product development process, co-creation, is being practiced by numerous companies. Previous research has investigated how consumer participation in co-creation affects consumer attitude. However, little is known about how co-creation affects the attitudes of the observervers of co-creation. The effect of observed co-creation on consumer attitude should be important when deciding whether to apply co-creation or not, as the observing consumers make up a larger part of the consumer collective than the participating consumers do. The paper at hand aims to investigate how observed co-creation affects consumer attitude and purchase intentions.

This examination paper concerns how a organization can reach right quality. In this case the focus is on the communication of the soft product quality within an organization to achieve right quality. To fulfill the aim of this study a case company has been used to be able to show the absence in the topic. The questions of the study are: How have the customer?s needs been communicated within the organization? What absences are there today concerning the communication of the customer?s needs within the organization? How can the communication of the customer?s needs within the organization improve?The aim of this study is to describe and analyse how the transmitting of the customer?s needs concerning soft product quality is made today in the case company and to reach any improving suggestions.

The purpose of this master thesis is to present a model that illuminates the important factors when deriving technical information from market data within a company. For companies to be able to become and stay competitive in the market, product quality is an important factor. Whilst good product quality leads to customer satisfaction and loyalty, lack of quality brings costs in service and replacements. To improve product quality, the developers need information and knowledge about what quality issues affect existing products. Most companies gather data from market about known issues, but in order eliminate known quality issues in new products; this data has to be transformed into information and knowledge.

Mängden information och informationskällor ökar exponentiellt med tiden och metoder för hantering av information blir därför allt mer relevanta. Privata och offentliga organisationer uppmärksammar allt mer behovet av en strukturerad och effektiv metod för att kunna hantera denna oundvikliga informationstillväxt.Uppsatsen syftar till att identifiera potential att förbättra det nuvarande informationssystemet inom Bild- och Funktionsregistret genom att tillämpa en Information Lifecycle Management-strategi utifrån Leanperspektivets värderingar. Studien inleddes med en litteraturstudie där de huvudsakliga Lean- och Information Lifecycle Management-principer definierades för att skapa ett teoretiskt underlag för vidare studier. Den efterföljande empiriska fallstudien av Bild- och Funktionsregistret och Sahlgrenska Universitetssjukhuset genomfördes för att få en ordentlig och tydlig bild av den organisationen och dess informationssystem.Fallstudien identifierade de huvudsakliga problemen och möjligheterna i den nuvarande organisationen. Problemen i form av organisatoriska brister, bristande användning av systemet och växande informationsvolymer bemöts genom införande av klassificering, strategisk integration och hierarkisk lagring av information.

Syftet med undersökningen är attöka förståelsen för operatörers möjligheter, hinder samt drivkrafter tilllärande i en lean organiserad verksamhet. För attundersöka detta har vi brutit ner syftet i följande frågeställningar: (1) Vadfinns det för möjligheter, hinder samt drivkrafter till lärande utifrånperspektivet arbetets utformning och autonomi? (2) Vad finns det förmöjligheter, hinder samt drivkrafter till lärande utifrån perspektivetledningens stöd? (3) Vad finns det för möjligheter, hinder samt drivkraftertill lärande utifrån perspektivet samverkan och team?(4) Vad finns det för möjligheter, hinder samt drivkrafter till lärande utifrånperspektivet kompetens? Vi har i denna undersökning använt oss av kvalitativmetod och genomfört kvalitativa intervjuer med arbetsledare, teamledarekoordinator, teamledare och operatörer. Resultatet visar attoperatörsarbetet i många delar har en hög grad av standardisering, vilket å enasidan kan innebära att individen lär sig att bemästraen viss uppgift men det kan även bli ett hinder för ett mer utvecklingsinriktatlärande. Samtidigt framkom faktorer som möjliggör ett mer utvecklingsinriktat lärande i arbetet.

An increasing global tourism offers great opportunities for Sweden as a tourist destination. However, an attractive destination requires competitive destination marketing strategies. Tourist destinations often include a complex network of stakeholders of small and large en-terprises that represent both the public and private sector. One condition for successful des-tination marketing is that all of these stakeholders collaborate in their marketing to create an integrated and powerful image. Another important aspect in terms of increasing the des-tinations competitiveness is that the local tourist companies are "export-oriented", in order to ensure that international tourists are looked after appropriately.This study has focused on the destination marketing of Stockholm.

Green public procurement (GPP) can be used as an instrument to reduce carbon dioxide emissions, and consideration of environmental aspects within public procurement is becoming more common in Sweden and internationally. Two product groups that have been pointed out as especially important are transports and electricity, where the opportunities for public purchasers to reduce emissions are relatively large. This paper studies GPP which aims at reducing emissions, primarily of carbon dioxide, through environmental requirements within these two product groups. A theoretical analysis of cost-effectiveness, transaction costs and effects on technological development is performed, followed by a closer study of how these aspects appear in practice within GPP. The results indicate that a cost-effective allocation of reductions between the two product groups is most likely to be attained if the main part of emission reduction is achieved through environmental requirements on electricity. The cost for emission reduction within transports is relatively high, especially for heavy transports. For transportation services, more generally focused requirements on emission reductions could probably give greater environmental gains, but the existence of transaction costs steer the environmental requirements towards more technology specific types.

Scania is constantly trying to improve their product development process, the PD-process.The company, along with others, is optimizing their development process in order to gainadvantage in terms of shorter lead times and larger market shares. For this to happen, a wellorganized process is required.The PD-process is divided into three different phases that are linked together by a hand-overprocedure. Scania Bus has experienced problems that stem from a lack of hand-over routines,and as a result the product development process has been slowed down. This has a number ofconsequences, one of them being the complication of new project initiations.The main purpose of this master thesis was to review the hand-over procedure. Within thestudy the project directive was also to be examined, and a recommendation of how the start ofa new project could be made easier was included.To begin with, a detailed literature study was conducted with the intention of obtaining thebasic theoretical knowledge needed for this study.