Under framtagandet av nya produkter måste ett antal prototyper tillverkas för att verifiera konstruktionen. För en metodingenjör som tar fram reparationsmetoder innebär prototyptillverkning att tankar som växt fram under utvecklingsfasen kan provas för första gången på en fysisk produkt. Detta sker relativt sent i produktutvecklingen och eventuella ändringar som kan uppstå på grund av att servicevänlighet inte uppnås blir mycket kostsamma. Om däremot prototypen där metoderna verifieras för första gången är digital och detta sker tidigt blir kostnaderna för eventuella ändringar avsevärt mycket mindre. Modellen som ligger till grund för metodstudierna kan sedan används för att skapa ett utkast till service litteratur, detta medför att även den delen av slutprodukten kommer att vara i fas med övriga utvecklings avdelningar. Under detta projekt har en digital prototyp av en Scania motor använts för genomförandet av metodstudier.

The group of elderly people in Sweden will increase significantly in the future and science point out that the future elderly people will not accept today?s standards and offers of assistance in today?s public elderly care. Therefore public elderly care stands before a significant challenge in terms of development that has to be sustainable. New research also points out that middle managers can be a great strategic resource, and a founder of success, in the challenge of sustainable development. The aim of the report was to increase the knowledge about what middle managers in public elderly care think sustainable development has to embrace, when it comes to quality and personnel administration, in order to meet the needs of the future elderly people.

The major environmental problems that we have today are frequently mentioned in the media today. One example is the ongoing debate regarding global warming and its causes and consequences. There are also several other problems in our society such as segregation and social tensions. Most agree that we must do something to solve these problems and that we must try to achieve a sustainable development for the entire planet. But how should it actually be done and what trade-offs, compromises, sacrifices and changes must be made?The purpose of this paper is to examine how these issues are being dealt with in Swedish city planning.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

The study examines selectivity of the customer base and scarcity of a product?s effect on attitude and value towards a product or service. A questionnaire study is made from three different situations. The result varied depending on the situation; however it was found that selectivity of the customer base and scarcity has a great impact on the attitude and the perceived value towards a product or service. Selectivity of the customer base was found having the highest level of impact on both attitude and perceived value.

To identify the underlying forces behind a product hype is difficult and the findings often seem random and unclear. To create a better understanding behind the affecting mechanisms would consequently be a valuable addition to the surrounding research area. The purpose of this paper is to understand if there exist common denominators between different product hypes and in such a case, which these are and how they function. By conducting a case-study on four products which have enjoyed immense sale success on the Swedish market, the possible presence of structural resemblance will be analyzed. From the study we can conclude common denominators such as the presence of an underlying trend and an overbalance of indirect decision basis do exist.

En kvalitetsförbättrande metod som senaste åren blivit vanlig inom Hälso- och sjukvård är Lean Healthcare - en verksamhetsfilosof som går ut på att eliminera slöseri och skapa värde för patienterna. I takt med att informationssystem och informationsteknik (IT) har utvecklats har informationsförsörjning fått en allt viktigare roll i vårdprocessen. Tidigare undersökningar visar dock att vårdpersonalen upplever att det finns många brister kopplade till informationssystem och IT. En explorativ fallstudie genomfördes där kvalitativ data samlades in med hjälp av intervjuer, dokumentstudier samt observation. Syftet var att beskriva hur informationsförsörjningen påverkats i ett kliniskt mikrosystem och i en vårdprocess som infört Lean.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

By exposing their products in blogs, companies have the opportunity to reach out to hundreds of thousands of consumers daily. Instead of using conventional Internet advertising such as banners and ads, some companies chose to make use of product placement in blogs. By choosing to expose their products in blogs, companies use a medium that blog readers are familiar with and can relate to, and can thereby solicit customers for their products and brands.We will examine whether product placements in fashion blogs are an effective way for businesses to market themselves and their products. We measure this efficiency, by keeping a record of the sales of ten product placed garment and accessories that we have selected from four of the largest blogs in Sweden. The stores we examine sales of product placed goods in are volume brand stores such as Zara and H&M etcetera.

Identification and analysis of key success factors for an entrepreneurial firm to achieve leverage when establishing on a foreign market with a premium consumer product..

This report is the result of a master thesis at Linköping University - Institute of Technology and Uppsala University at the request of the chassi workshop at Scania CV AB in Södertälje. Since the beginning of the 90's, Scania CV AB has had a close cooperation with Toyota from which, among other things, the Scania Production System (SPS) has evolved. SPS explains Scanias' values, principles and priorities. The Technician department (MST) at Scania Chassi in Södertälje believes that SPS can streamline the technicians work and help them become a more homogeneous group. The purpose of this master thesis is to initiate an implementation of SPS within MST through two pilot projects involving both the product and process technicians. The SPS principle Normal Situation - Standardised working method was required to be implemented within one work task each for the two groups of technicians with special attention on the three subprinciples Standardisation, Takt and Balanced flow. The master thesis fulfilled its purpose as the two pilot projects initiated the implementation of SPS within MST and the three sub-principles Standardisation, Takt and Balanced flow were implemented within the two chosen work tasks.

AbstractCompanies in the Swedish process industry has for a long time spent a lot of capital in high-tech development, which have given them increased ability to compete with high quality and excellent technical knowledge, which has given them greater opportunities to grow on the market. But it?s not enough to achieve success with new products and service; it must also be consistent what market wants and preferably something exceptional. The purpose of this study was to determine the factors that are predominantly success factors and how they may affect the sales target of a new product, in this case Frövi White. Another objective of the study was to examine how Korsnäs Frövi communicates and transforms information as requests and demands from customers into refined material. To obtain relevant information to the study several interviews with respondents from most of the value chain in Korsnäs Frövi has been carry out.

Technological developments have affected many different areas. Something that has undergone major changes in this respect is gambling. Because of technology, the accessibility to games has never been greater. Using smartphones, tablets and online casinos makes it possible to play virtually any time of day no matter where you are. This development has caused that more people, got stuck in a gambling addiction which have become an increasing problem in the last decade.

På dagens hårt konkurrensutsatt marknad är inte bara priset en viktig konkurrenskraft, även relationen mellan kund och leverantör kan spela en avgörande roll för om det blir en affär eller inte. Möjligheten att låta kunden vara delaktig i produktutvecklingsprocessen är även ett sätt att stärka kundrelationerna. Uppsatsens syfte har därför varit att undersöka kundrelationerna både från leverantörens och kundens perspektiv. Avsikten med uppsatsen var även att undersöka hur kundrelationer och kundinvolverad produktutveckling kan användas för att skapa konkurrensfördelar inom Business-to-Business. Almedahls var även intresserade av att närmare undersöka möjligheterna för digitaltryck, vilket är en ny tryckprocess för företaget.Vi gjorde därför en fallstudie på Almedahls, ett tillverkande företag inom textilbranschen.