The development of defoaming additives is steadily progressing and there are therefore always new and improved additives on the market. Some modern additives provide the desired defoaming effects by themselves, in contrasts to previous additives that needed to be used in combination with other additives. The task of this bachelors thesis was to evaluate the possibility of using these improved defoaming additives, with the aim to find alternatives that give the system better defoaming attributes while, at the same time, using less of the primary products. The tests were carried out in the coating type Teknocryl Aqua Combi 2780. The coating is a waterborne air drying acrylat-latex/alkyd based coating that can be used for both single coat painting and primer.

Sweden is dependent on secure sea transport. Shorter disruption of imports of fuel and crude oil can be managed with an emergency stock, but a prolonged halt in imports creates problems. For industry, the vulnerability is greater. Fragmented production chains in combination with expenditure reductions in inventory causes a dependency on proper transport of intermediate goods in the manufacturing industry. A lengthy disruption thus involves disruption of production for both domestic consumption and for export goods containing imported parts.In order to secure shipping routes with a limited number of vessels, Mine Counter Measures (MCM) capacity is required, and according to the Armed Forces, developed with new sensors and autonomous vehicles.

This report summarizes a Bachelor Degree Project in Integrated Product Development, carried out during the fall 2007 till spring 2008 by three students at the Product Design Engineering Program at the University of Skövde. The project was performed in cooperation with Lundbergs Möbler AB in Tibro. Lundbergs wants to start selling furniture to the public eldercare. The purpose of this project was to adjust one of their chairs. The project layout was to first make a preliminary investigation where the market, competitors? assortment and the purchasing process are studied.

Sweden is dependent on secure sea transport. Shorter disruption of imports of fuel and crude oil can be managed with an emergency stock, but a prolonged halt in imports creates problems. For industry, the vulnerability is greater. Fragmented production chains in combination with expenditure reductions in inventory causes a dependency on proper transport of intermediate goods in the manufacturing industry. A lengthy disruption thus involves disruption of production for both domestic consumption and for export goods containing imported parts.In order to secure shipping routes with a limited number of vessels, Mine Counter Measures (MCM) capacity is required, and according to the Armed Forces, developed with new sensors and autonomous vehicles.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

En av Parocs produkter är sandwichpanel som är ett byggmaterial som kan variera i storlek och tjocklek och är funktionellt och smidigt. Uppdraget var att designa ett beslag för panelsystem som minst 50% av Paroc Panel Systems kunder skulle föredra framför de gamla, främst med avseende på estetiken, men även baserat på lätthet att montera och kostnad av beslaget. Projektet skedde i samverkan med företaget Paroc Panel System AB och ur förundersökningen framkom att utseende, monteringsmöjligheter, egenskaper såsom materials livslängd och hållfasthet och totalkostnad var viktiga krav som ställdes på produkten. Lösningsförslag med fokus på flera viktiga aspekter togs fram och kombinerades till olika koncept med hjälp av en så kallad morfologisk tabell. En konceptutvecklingsfas ingick där hållfasthetsberäkningar och materialval var avgörande.

Detta examensarbete har utförts på livsmedelsföretaget Svenska Smakupplevelser. Företaget möter en ökad efterfrågan och vill därför bättre kunna använda sig av de resurser som finns i produktionen. I och med att företaget är relativt sett ungt har de tidigare inte ägnat sig åt produktivitetshöjande förbättringsarbete i produktionen. Målet för detta arbete har därför varit att skapa goda förutsättningar för Svenska Smakupplevelser att utvecklas till en lärande organisation, genom att utveckla och förbättra produktionssystemet, baserat på insamlad information. Detta mål har delats upp i två delmål, listade nedan.? Att stötta och driva arbetet med att implementera ett mätsystem för övervakning av maskinprestanda och produktivitet och fastställa relevanta och mätbara nyckeltal, för fabrikens största produktionslina.? Att stötta och utbilda anställda på Svenska Smakupplevelser kring hur ett systematiskt förbättringsarbete kan se ut och hur insamlade data kan användas i förbättringsarbete.Som en del av arbetet har vi gjort en litteraturstudie med syfte att upprätta en teoretisk referensram.

There are several objects of age whose provenance and history has disappeared with time. The purpose of this thesis is to find out which analyzing methods that gives results and how the different methods can be combined and /or established in each other. The investigations centers around an embroidery, belonging to Tämta church, with unknown origin, use and age. The embroidery is long and narrow with applications in the form of dragons and eagles on a ground of velvet cloth. The dragons and eagles are covered with metal threads.

This thesis work has been carried out at the consultant company Pöyry Sweden AB in Norrköping, whom performs the task for E.ON heating Sweden AB, Händelöverket in Norrköping. The report shows methods to manufacture slurry consisting of fly ash and water. The slurry shall be pumped into several former oil storage rock shelters that E.ON has put into operation for the specific purpose. The ash mixture also develops hydrogen gas in contact with water.The work has aimed to produce different suggestions of methods and equipment that can be used for the objective. Mixing method and security issues were in centre while working with the suggestions.

Detta examensarbete är en utredning av möjligheten att involvera yrkesarbetarna i projektplaneringen vid HÖ-Allbygg AB i Kalix. Utredningen handlar om att ta reda på eventuella hinder och fördelar med att yrkesarbetarna deltar. HÖ-Allbygg AB vill göra yrkesarbetarna mer engagerade. Detta för att yrkesarbetarna ska göra ett mer genomtänkt arbete och känna helheten i hela projektet. Resultatet blir en samverkan i projektplaneringen med färre driftstörningar.

After contacting the company Elite Group Sverige AB, who sells strollers under the brand Crescent Baby, it was determined that the project group were to develop a three wheeled stroller which was going to be Crescents first own developed stroller. Only the frame of the stroller was considered within the demarcation of this project however care was taken to the placement of the carry-cot and the wheels etc. Crescent Baby wished for the frame would be smaller than the competitor Urban Jungle, that the frame would have at least three unique selling points and that the number of unique parts was to be minimized. The work began with information seeking regarding strollers, competitors, independent tests, European standards and consumer interviews. After that a number of concepts were developed and past to Crescent.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated. Requirements written by different people in different organizations were analyzed in order to sort out if there were some similarities? which could be used as standard elements in a future standardization of the process.

AB Edsbyverken planerar för en ökad produktion de närmaste åren, de tror sig veta att flaskhalsen för täcklackerade produkter befinner sig i lackeringsavdelningen och då framförallt i den stora lackeringslinan. De har önskemål om en övergripande översyn av avdelningen. Den övergripande översynen har som mål att detektera och reducera/eliminera onödigt arbete genom olika åtgärder. Resultaten visar att de många bristerna beror på sviktande rutiner och en ovilja hos de anställda att ta upp brister som de upptäcker. De åtgärder som har genomförts är av en i princip kostnadsfri natur.

The ability for companies to anticipate the future and stay in the forefront of the competition is essential for successful business. The tool of Environmental Scanning is basics in the process of developing prescriptive strategies as well as vital in evolving emergent strategies. The complexity lies in gathering relevant information and transforming the information into adequate data, which can be utilised by management to optimise strategies. The purpose of this study is to scrutinise how successfully operating Swedish manufacturing companies, listed on the Stockholm Stock Exchange?s ?Large Cap?-list, organise their Environmental Scanning actions and how this affects the development of strategies. Prior research on the subject has been used as foundation to presenting relevant theories.

This thesis has been performed at Uddeholms AB with the purpose to investigate theparameters affecting the formation of inclusions during the manufacturing of a low carbonmanganese-steel.A follow-up, steel and slag sampling and evaluations in microscope have been done for a totalof five heats.The results for each heat have been evaluated in relation to the theory from the literaturesurvey and suggestions for changes in the process to reduce the amount of inclusions whichhave a negative effect on the steel quality have been given.The project extends over a large process where many parameters affect the formation ofinclusions. However, a tendency that a higher addition of alloys seems to increase the totalamount of inclusions before and after the vacuum degassing is seen.The majority of the studied inclusions seem to approach the composition of the top slag aftervacuum degassing. Ladle glaze may cause the inclusions which had a different compositioncompared to that of the slag.A high or low ladleage together with a high argon flow during vacuum degassing seems todissolve particles from the refractory which later on get trapped inside the inclusions.The floatation for two heats has been studied where a short floatation seems to give a higheramount of inclusions in casted material.In machined material so called stringers were found. The main composition of those stringerswas pure alumina. Inclusions with a composition of pure alumina were not found in the liquidsteel, thus the pure alumina inclusions must be formed during the casting.