This master thesis was carried out at Scania in Södertälje, Sweden. It investigates the possibility of changing a connector interface that is used when there is a need for splicing the wheel speed sensor and thereby determine the consequences.The problems that exist with the current connector interface occur during assembly, as more time is required to complete a connection in a reliable manner. A complete connection requires joining the male and female connector, insert the connection into a protective retainer and then strap a cable tie on each end of the retainer. This process makes it more time consuming and it requires 20-30 seconds to complete the connection. Solving this problem would save time and enable easier assembly, therefore resulting in economical benefits.This thesis was accomplished through discussions with different sections at Scania, studying available documentations, observations during assembly, writing a requirement specification and contacting suppliers.The aforementioned methods resulted in four connector suggestions, the DT and DTMH connector from Deutsch, MCON connector from TE connectivity and MLK connector from Kostal, each of them compliant with the set demands of the surrounding environment.

The aim of this thesis is to evaluate a Swedish subject headings list for childrens and young adults fiction, from the perspective of consistency, and to analyze this concept's importance as a tool for measuring indexing quality. Another aim is to examine how librarians view the subject headings list as an aid for indexing fiction. The main questions are: How does the degree of consistency change when using a subject headings list for indexing fiction compared to free indexing? How does indexing change according to the facets Form/Genre, Time, Space, Matter and Person when using the list? What do consistency calculations reveal about indexing quality? How do the participants look upon the list as an aid for indexing? The empirical material consists of results from two different indexings of fiction, conducted by librarians. Consistency is calculated using Hoopers and Rollings algorithms.

Föreliggande studies syfte är att studera och beskriva behandlingsmodeller för män som använder våld mot kvinnor i nära relationer. Syftet kan brytas ned i följande frågeställningar: (i) vilka behandlingsmodeller finns omnämnda i litteraturen för män som använder våld mot kvinnor i nära relationer och hur kan dessa beskrivas, (ii) vilka likheter respektive skillnader finns mellan olika behandlingsmodeller, (iii) vilka behandlingsresultat och utvärderingssvar finns dokumenterade beträffande behandlingsmodellernas effektivitet samt (iv) hur kan resultatet analyseras utifrån teoretiska perspektiv beträffande mäns våld mot kvinnor? Som utgångspunkt för analys har tre teoretiska perspektiv beträffande mäns våld mot kvinnor brukats. Dessa har utgjorts av ett strukturellt/feministiskt, ett individualpsykologiskt samt ett socialpsykologiskt perspektiv, vilka förklarar mäns våld mot kvinnor på skilda abstraktionsnivåer och med olika teoretiska utgångspunkter. Föreliggande uppsats har genomförts som en litteraturstudie med ett kvalitativt angreppssätt, med anledning av studiens intention att beskriva och sammanställa kunskaper om existerande behandlingsmodeller för män som använder våld mot kvinnor i nära relationer.

The ÅF Group is a leader in technical consulting, with expertise founded on more than a century of experience. They offer highly qualified services and solutions for industrial processes, infrastructure projects and the development of products and IT systems. They are also one of the leading names in certified third-party testing and inspection work.Today the ÅF Group has approximately 4,000 employees. Their base is in Europe, but their business and clients are found all over the world.A part of ÅF-Engineerings business is programming different automation systems to clients. Another part is support in both telephone and personal visits.Because the number of clients is high and the flora of different automation systems is big the consequence is that the employees must have access to many licenses with programming tools.

Imperialism has for a long time been an important concept in international relations. The literature identifies many different types of imperialism. After the great de-colonization scientists stopped discussing ?classic? imperialism, i.e. using physical strength in the form of conquest and occupation to subdue weaker states.

This research is about different perspectives, offered by three mother tongue teachers, one principal and also featuring a representative from Skolverket, on the subject: teacher legitimation for mother tongue teachers, mother tongue teachers opportunity for competence education and the future of mother tongue education in Sweden.The theoretical framework is mother tongue language, globalization, the post-colonial theory, power and social inequality. A qualitative approach was used including five interviews taken place in Stockholm, the results does not however represent the whole country nor the community of Stockholm itself.The result shows that mother tongue teachers thinks the teacher legitimation does not mean anything regarding their already low-status. Even principal and representative from Skolverket express their concern towards the 'non-demand' for mother tongue teachers to get their legitimation and they feel there is a lack of ambition from decisonmakers to include the mother tongue teachers.As per today there is no higher education for mother tongue teachers leading towards an exam. Mother tongue teachers are worried about their future although principal and representant takes a bright outlook. .

This essay aims to examine how three active history teachers in the upper secondary school interprets the new course plan for history in gy11. The essay shows how they discuss and express opinions regarding three main keywords - historical awerness, use of history and source criticism, and finally, how they think they need to change the way they teach..

There are two groups of haulage contractors in roundwood transport , those who are contracted direct by the transport buyer and those who are connected to a freight company which in its turn is contracted by the transport buyer. Today the roundwood haulage is dominated by contractors with one to two lorries. The effort of coordinating transportation for a transport buyer is dependent on how many communication contacts that must be managed (how many individual haulage contractors the transport buyer has to work with). A structural change in the sector that leads to a decrease in the number of haulage contractors but an increase in the capacity of each contractor, makes it possible for a transport buyer to coordinate transports with fewer communication contacts. The reason why a company reaches a certain size can be explained by the number of contracts it makes and manages.

The location on the river delta of Klarälven, adjacent to lake Vänern, makes Karlstad one of the Swedish cities where a significant flood risk is present. The city has several major floods in its memory which has caused great material damage and economic losses, the latest of which occurred in the winter of year 2000/2001. The purpose of the study is to examine how the approach to flood risk has changed in the municipality of Karlstad since the 1950s, and how this change has affected the current situation regarding the city's vulnerability to flooding. To investigate this, a document analysis was conducted, where key documents in the media and from the municipality of Karlstad was studied. Furthermore, an interview study was conducted with respondents who currently are employed or previously have been employed in the municipality of Karlstad, who in various ways work with issues of flood risk. The result of the study shows that several changes have taken place since the 1950s in terms of the municipality's approach to flood risk, which for instance has led to preventative measures being taken to a greater extent than previously in the physical planning.

Ericsson develops a new stripline directional coupler. Its design is described in appendix B and differs from the directional couplers Ericsson uses in current products. The new directional coupler will be used for transmission power measurement in future UMTS 3G base stations.The most important parts of directional coupler theory are presented. It is necessary to study this theory to understand how the coupler works and how it should be designed to get good performance.Optimal directional coupler termination component values to get high directivity and broad directivity bandwidth have been investigated.The trim screws trim ranges have been studied.A simple analysis of serial production performance when termination component tolerances are taken into consideration has been done.The resistance components reactive (inductive/capacitive) characteristics at 2.14 GHz have been analyzed.The directivity performance limitations of the directional coupler, when Ericsson?s band pass filter is connected, are investigated.Design changes leading to better performance are proposed.

The purpose of this master thesis is to use marketing theory on the library?s activities. The marketing theory used is the 4Ps; product, price, promotion and place, as it's presented by Philip Kotler. Because the library can be seen as a service oriented organization Christian Gronroos theory of marketing in the service industry also has been used. A case study of the public library in Broby was made to illustrate how the public libraries? activities can appear in the light of marketing theory.

The purpose of this essay is to examine how public libraries work with children's books, in other languages thanSwedish, regarding acquisitions. The purpose is also to describe what the libraries assignments are in regard tochildren with non-Swedish backgrounds. This is then put in a relation to the libraries democratic assignment.The main questions are: What are the libraries' assignments, as described in the libraries regulations? How do thelibraries work to fulfil their assignments?To answer these questions a survey in two parts has been carried out. The first is a study of the libraries'regulations, and various handbooks that serve as an inspiration for librarians.

For a school library to function as a support for the students? development of their academic abilities, it must provide material satisfying their needs as well as the needs of the teachers. The school library should assist the students in their research endeavours, as well as inspire reading for pleasure. In order to do this it is imperative that the school library actively develops the existing collection and continually strives to meet the needs of its users. The aim of this Master?s thesis is to describe and reflect upon how a particular school library works with collection development.

The role of the professional photographer is ever changing. The changes take place as the Swedish media industry itself, due to fluctuations in the economy, is forced to change. As the demand for printed news wane, the advertisers seek out other media and free newsprint & the internet take over large portions of the market, the newspaper industry is forced to cut issues and make drastic changes to stay in business. This changes directly affects the way news bureaus are organised and inevitably changes the working conditions of their employees. The two competing newspapers ?Arbetarbladet? and Gefle Dagblad? in the Gävle district were affected by this kind of change in quite a unique way.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.