Mussel meal is a potential source of protein, with a good composition of amino acids, for laying hens and broiler chickens, and may replace the use of fish meal in organic poultry production. Lead and cadmium are heavy metals which occur in the environment and can be accumulated in mussels. When poultry are exposed to heavy metals, the metals are absorbed in the small intestine and distributed in the body in the form of ions, complexes or bound to proteins. In poultry, lead accumulates in bone tissue, liver and kidneys, while cadmium accumulates in liver and kidneys. Generally very low concentrations of these heavy metals occur in muscles of broilers which have been exposed to feed contaminated with cadmium or lead.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

Jag har arbetat med att producera ett informationsmaterial för nya hyresgäster hos hyresvärden Ydewalls i Katrineholm. Jag har använt mina kunskaper inom informationsdesign, textdesign och grafisk form för att utforma materialet.    Syftet med informationsmaterialet är att ge de nya hyresgästerna den information som de kan tänkas behöva under tiden de bor i lägenheten. Ydewalls vill genom att förbättra sitt material minska antalet onödiga förfrågningar från hyresgästerna.   Jag har arbetat efter min huvudfråga: hur skapas ett informationsmaterial utifrån de principer som finns inom informationsdesign? För att få svar på min fråga använde jag mig av metoder som litteraturstudier, komparation, deskription, enkätundersökning samt utprovningar.

This thesis presents my work at the company Fatshark AB in Stockholm. My supervisor Rikard Blomberg, who works as a chief technology officer at Fatshark and is one of the owners of the company, explained that they had experienced weaknesses in the methodology used when developing heads up displays (HUD) for their games. In the latest production, Lead  and Gold, the HUD had been redesigned a number of times, becoming an unnecessarily big expense due to the number of work hours invested. In modern software development, an iterative workflow is commonly encouraged. Despite this fact, the work efficiency could likely be increased by setting up guidelines as a help in the process of developing HUDs and reviewing the solutions.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

Denna studie har underso?kt hur Israel- Palestina konflikten kartlagts i de tva? dagstidningarna Dagens Nyheter (Sverige) och The New York Times (USA). Fra?gan som besvarats a?r hur rapporteringen i artiklarna under tva? utvalda ma?nader (juni-juli 2014) sett ut, utifra?n teorier om krigs- och fredsjournalistik, mediernas roll som opinionsbildare, narrativitet och fo?renkling av konflikter. Materialet besta?r av totalt 158 artiklar, 62 fra?n Dagens Nyheter och 76 fra?n The New York Times.

Waste appears to be a low-cost fuel compared to biofuel. This Masters thesis was conducted for Vattenfall Utveckling AB and deals with how waste in the fuel affects the performance of a SCR-catalyst. Different mechanisms of deactivation were surveyed, focusing on the poisoning mechanism. A literature study was carried out, which was used as a reference when analysing the results.Small samples (9x2x2 cm, 64 pieces) cut out from a full-scale unused honeycomb catalyst were exposed up to 1500h in two different combustion plants, Johannes in Gävle (co-combustion) and Högdalen in Stockholm (waste-combustion). The activity was measured mainly at 300°C but also at 250, 350, 375 and 400°C.

When establishing a groundwater protection area it is of great interest to be able to estimate the transit time of the groundwater from different places of the aquifer to the withdrawal well. These estimates can be uncertain due to heterogeneities in the aquifer. As a part of the work to develop methods for a more certain delineation of protection areas, a tracer test was performed in an esker located 25 kilometres NW of the town Uppsala.The purpose of this master thesis was to perform, describe and evaluate the tracer test. Travel times from the tracer test should then enable comparison against stochastic simulated travel times of the groundwater in the area.Three dyes (rhodamine WT, uranine and naphtionate) and a salt (NaBr) were used in the tracer test. The tracers were injected in four different wells located 25 meters from a pumping well.

Istället för att få standardutseendet på sina D-uppsatser ville en avgångsklass på en Mediedesignutbildning göra en bok där de samlade sina uppsatser. Denna bok fick en ny form som arbetades fram i den här uppsatsen. Huvudfokus låg på läsbarhet och frågor om estetiken i typsnitt och layout samt om det var möjligt att behålla seriositeten samtidigt som den känns kreativ och modern. 18 personer var med i försöksgruppen som bland annat fick rangordna de tre typsnitten Times, Sabon och Verdana för det aktuella ändamålet. Sammantaget var Sabon det typsnitt som visade sig vara mest lämpligt för en publikation av det här slaget.

The milk production has developed rapidly the last years. The milk production per cow is increasing and the production units are larger with an increasing number of animals and a decreasing number of workers. Many milk producers invest in automatic milking systems (AM) to meet this change. In these systems the cows can voluntary decide milking frequency and usually the milking frequency are higher than two times per day. But how does the milking frequency effect the composition of the milk? The aim of the present study was to study the effect of milking frequency on the milk composition and the milk fat quality.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

When drivers overnight in the truck lots of electric energy is consumed by heaters, fans, lights and other extra equipment. If the engine is not running, this energy is taken from the lead/acid batteries of the truck which then needs to be recharged during operating hours. The fact that the charge acceptance of the lead/acid batteries is dependent on the temperature makes it hard to fully recharge the batteries at lower temperatures. A negative charge balance can lead to starting problems within a few days use in cold climate.In this thesis work, the effects of different battery charging concept are evaluated on the most common Scania battery (175Ah). A battery model is implemented in Matlab and some simulations of charging are made.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..