Abstract: The world in which companies are acting today offers challenges in the sense that it is rapidly changing and that a vast amount of information is available. In order to ensure the competitiveness and survival of the company, an effective and efficient environmental scanning is essential to the company. Our aim with this Master's thesis is to investigate what factors constitutes important and basic conditions in a well functioning environmental scanning and how companies strategically can go about to achieve this. In order to highlight and specify how these factors can be applied on a specific company Thule has been our focal point. Thule.

Uppsala University is involved in a large international collaborationto build the Laser heater system for the European Xray Free-electronlaser in Hamburg, Germany. In this thesis I describe a laser incouplingdevice into the vacuum chamber of this laser heater all the way fromthe specifications to a completed design.The laser heater is a very important part of the XFEL and thepart described here is a part of the vacuum system needed to couplean external laser into the electron vacuum system and align it withthe electron bunches in order to heat them. The task was started by studying the literature about the basic theory andthe design of vacuum systems. After this study and collection of ideaswith colleagues I started to prepare different concepts to solve thetask. The ideas can be put into two categories, in one case the couplingmirror is located inside the vacuum chamber and in the second caseoutside.

The purpose with our thesis is to understand and explain the advantages and disadvantages there is with the self scanning system. The advantages and disadvantages we will highlight from three different angels; the store management perspective, the staff perspective and the customer perspective. These three perspectives will together form an overall perspective over the advantages and disadvantages as the self scanning system has contributed with. Finally we will highlight the differences and resemblances we have found between the perspectives.Through a qualitative approach we have gathered data to our thesis. Furthermore we have based our theory chapter and our empirical chapter on the base of Grounded Theory.

Booth for operational planning of harvesting and for long term planning, data is today collected manually. Intensive objective field inventories are usually too expensive. To enhance optimisation of timber flow from forest to industry Moore efficient methods for measuring tree stems of standing trees are needed. The performance of terrestrial laser scanners have improved and these could possibly be used within forestry in the future. The objective of this study was to validate how a terrestrial laser scanner could be used to measure stem diameter, and to test how the errors depend on distance from the scanner and tree species. Two plots (one pine and one spruce) were used for this study.

Denna uppsats avhandlar möjligheter och begränsningar vid användande avhögenergilaser för nedskjutning av luftmål. Uppsatsen har inte ambitionen attvara heltäckande över området utan presenterar några av de fördelar ochnackdelar som finns..

The thesis mission is to investigate whether the swiveling laser that Vectura (former Vägverket Konsult) has in use to measure the road areas and straddle measuring can be used to detect differences in the reflective road markings function. This is to increase use of the swiveling laser and get rid of the manual measurements performed today.Currently, the measurement of road markings reflective function is performed with both mobile and handheld measuring instruments. The purpose of this thesis is to develop better methods for determination of road markings? reflective function, in order to facilitate the description and suggestions for improvements of the maintenance of road markings reflective function.The questions that the thesis has been to start with are:Can the swiveling laser detect differences in longitudinal and transverse road markings reflective function?The accuracy of measurement has been sweeping the laser over the reference instrument (LTL-2000)Is it necessary with a conversion factor for swiveling laser data against the reference instrument data?To answer the question 2 and 3, there has been a field work in Värnamo where a road stretch with longitudinal road markings and zebra crossing (transverse road markings) has been investigated with a swiveling laser and LTL-2000.The formulas and calculations contained in the thesis are drawn from scientific reports that are produced by VTI in Linköping. The same formula that was used to calculate the optical measurement data was also used for the swiveling laser data.

Introduktion: Dental erosion definieras som förlust av tandens hårdvävnad genom en kemisk process som inte involverar bakterier. Dagens förändrade livsstil och kosthållning medför att våra tänder oftare utsätts för kemisk påverkan som kan leda till erosion. Det är flera faktorer som samverkar och dental erosion har en multifaktoriell etiologi.Syfte: Syftet är att beskriva olika registreringsmetoder för dental erosion.Frågeställningar: Vilka metoder kan användas för registrering av initial erosion? Vilka metoder kan användas för registrering av avancerad erosionsskada? Vilka metoder är kliniskt beprövade på patient?Metod: LitteraturstudieResultat: Ett flertal registreringsmetoder fanns beskrivna i litteraturen, merparten var inte applicerbara kliniskt. Registeringsmetoderna som framgick i den beskrivande litteraturstudien var: 3D scanning microscope (IFM), Atomic absorption spectroscopy (AAS), Digital photography (DP), Focus-variation 3D microscopy (FVM), Longitudinal microradiography (LMR), Non-contact confocal Laser scanning microscopy (CLSM), Optical assessment, Optical profilometry (OP), Quantitative light-induced fluorescence (QLF), Scanning electron microscopy (SEM), Stylus profilometry (SP), Ultrasound, White light interferometry (WLI) och X-ray diffraction (XRD).Konklusion: Vid registrering av initial erosion krävs analys av tandytans mineralinnehåll samt optiska analyser med hjälp av instrument.

The underlying aim of this paper is to find out how the management and employees in a grocery store on a relatively small community in Sweden is experiencing Technology-Based Self-Service (TBSS), and self-scanning. And how store management and employees experience that the self-scanning ability is received by their respective consumers. Several open individual interviews were conducted with the administrative head of sales and various employees working at different departments at Coop Forum in Skara In offering self-scanning, we believe that the store provides consumers with an opportunity to perform their daily purchases by an easy and flexible approach, which we believe will have a positive impact on the entire store visit. A positive store visit, we believe play a major role in consumers choosing to do their shopping in the store.The issue to be elucidated in this paper is; How do management and employees in a grocery store perceive that self-scanning influence consumers' purchase and the service the shop offers? Why would a supermarket use self-scanning as part of the service they offer to their consumers? The report concludes the similarities and differences experienced by administrative sales manager and employees compared to previous research on the subject.

The purpose of this report is to explore how modern technology can work againstolder craft techniques. The focus of the research will depend on what conditions areoptimal for cutting marquetry with laser technology. In my work I account for thehistorical background of the various techniques and then through own practical testsexamine whether the laser technology can complement the traditional techniques..

Today there are many applications of digital terrain models (DTM) and the requirements of low uncertainty increases. Most of the DTM are produced with Global Navigation Satellite System (GNSS), terrestrial Laser scanning (TLS), airborne Laser scanning (ALS) and total stations. Guidelines for the preparation and verification of DTM are found in Swedish Standards Institute ? Technical Specifications (SIS-TS) 21144:2007 and SIS-TS 21145:2007. These were defined in collaboration between Swedish National Rail Administration, Banverket, and Swedish Road Administration, Vägverket, to satisfy the needs of requirement formulations in the production of DTM planning, design and construction. The purpose of this paper is to produce and control DTM over Åkermans kulle, located west of the University of Gävle, according to SIS TS 21144:2007 using GNSS with network-RTK, TLS and ALS.

This report describes a Bachelor thesis work in which a robotised laser welding cell has been modelled and simulated for the purpose of making a presentation movie. The report shows that the work has been concentrated on making the movie from the modelling phase through the recording of the movie and ending up with the editing of the final presentation movie. A pre-study was made prior the Bachelor thesis work. In the pre-study a literature study was conducted about measurement and calibration of a welding cell. Measurement of almost all equipment in the entire cell was also conducted in the pre-study.

The purpose of the study is to reach knowledge about how public librarians understands and describes environmental scanning as a working process in a Swedish public library. The study consists of 5 interviews with public librarians working within the same organization. The empirical material is presented in two ways. The first one is what aspects of the external world the librarians find important. The second is through a theoretical framework based on Magnus Hoppes model of environmental scanning, including communication and cognitive processes aswell as ways of analyzing information from the external world.

In the global and rapidly changing society Environmental scanning is becoming a more and more important tool. Today it is not the availability of information that controls an organizations behavior, but the information that the organization chooses to absorb. This is the case for a multinational cooperation as well as for the local golf club. Swedish golf clubs have during the last 100 years had an amazing development and today there are almost 600 000 registered Swedish golf players. The development has however stopped and even declined some during the last couple of years.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

The ability for companies to anticipate the future and stay in the forefront of the competition is essential for successful business. The tool of Environmental Scanning is basics in the process of developing prescriptive strategies as well as vital in evolving emergent strategies. The complexity lies in gathering relevant information and transforming the information into adequate data, which can be utilised by management to optimise strategies. The purpose of this study is to scrutinise how successfully operating Swedish manufacturing companies, listed on the Stockholm Stock Exchange?s ?Large Cap?-list, organise their Environmental Scanning actions and how this affects the development of strategies. Prior research on the subject has been used as foundation to presenting relevant theories.