Irradia AB tillverkar och säljer terapeutiska, kirurgiska och kosmetiska lasrar. Företaget har hittills inte lyckats skapa utbyte med den offentliga sjukvårdsmarknaden. Syftet med undersökningen var därför att analysera och utvärdera hinder för Irradia AB:s introduktion på den offentliga svenska sjukvårdsmarknaden. Fokus lades på de terapeutiska lasrarna. På grund av undersökningsområdets natur gjordes en separation av mega- och marknadsnivå.

The mission was to create a prototype of a menu system for the companySystem Andersson AB. The instructions were that it has to be as interesting andmodern now as in 20 years. We had to look at technology from the cutting edgeof development to make our prototype survive in the future. WindowsPresentation Foundation (WPF) was the technique we focused on. There areonly a few applications that take advantage of WPF today, but it is predictedthat WPF will be the next generation method for developing applications to theWindows platform.To make our menu visually appealing, easy to use and at the same timefunctional, we followed the clear path and guidelines that are available ininteraction design.

Forest enterprises have always searched for ways to improve efficiency. For the past few years there has been an emphasis on stock-keeping levels. Increased demand for fresh round timber and the need to decrease the amount of tied-up capital has made the forest industry reduce its inventory levels. This has brought on a higher demand on the timber supply from the forest management districts concerning both delivery in time and assortment output. As a result, the flow of timber has fluctuated a lot with serious consequence for the timber supply during 1994.

During the late 1800s fire suppression became increasingly effective in northern Sweden which led to decreased areas of fire-disturbed woodland and successive changes in the structure of forests. In the long run this can pose a serious threat to fire-dependent and fire-favored species. Today some fire-prone forest reserves are burned as a nature conservation act. Often partial cuttings are made before burning, with somewhat different motives. The purpose of the study in Långsidberget nature reserve was to give a general picture of forest history and its affect on today?s forest condition, and to show how partial cuttings affect burning conditions and results. Långsidberget is located close to areas that were colonized during the Middle Ages.

The saw blade producer, Håkansson Sågblad AB, patented in the U.S. a new blade profiledesigned specially to cut fish and meat. The most important advantage of that blade is that its teethare not set, therefore the material lost when cutting is really smaller. The special geometry of thatprofile made that nobody had found a proper way to produce it before.The goal of the outlined work is to develop a machine to produce these new blades in afeasible way.The research approach of the project can roughly be divided into three phases:1.- Invention and development of a proper distribution of blades to produce a big amount ofthem at the same time.2.- Research of the best production process to produce the blades.3.- Main design of the machine to produce the blades.In the Thesis these three points are carefully developed and studied in the form of the startpoint of a really bigger project. Some tests had been done in order to prove all the analytical ideasand the results obtained had been satisfactory enough to give Håkansson the start point of a bigbusiness.

Denna rapport är resultatet av ett samarbete mellan Banverket och Luleå tekniska universitet. Rapporten behandlar ett projekt vars mål är att ta fram en prototyp av en profildetektor. Profildetektorn ska kunna klara av ett detektera utstickande föremål från järnvägsvagnar samt fungera i vårt klimat med dess variationsrika klimatologiska förhållanden. Idag finns det inget system med tillräckligt god prestande som klarar av det besvärliga klimat vi har här i Norden. Ett av de större problemen med de system som testats hittills är att de inte klarar av att filtrera bort falsklarm som då uppstår.

Background: Patients with self-harm seek hospital care when something traumatic occurred. Self-harm was a way to cure pain and was expressed overdose, cutting, or by swallowing objects. They described that the staff were derisive, didn?t show empathy and engagement. Aim: The aim was to describe factors that effects staffs answer to self-harm behaviour through their perspective.

The aim of this study was to describe non-surgical treatment options for the diseases mucositis and peri-implantitis found in present literature. The literature review also illustrates the effect of the treatment opptions on soft tissue with mucositis and peri-implantitis surrounding dental implants. The study reviews twelve scientific articles that have been processed from the aim of the study. The result shows six therapy options, Er:YAG laser, air abrasive, ultrasonic device, hand instruments, hand instruments in combination with antibiotics and hand instruments in combination with clorhexidin. The following methods are described according to how they are used and how they affect the soft tissue surrounding dental implants.

This master thesis work was done at Saab Underwater Systems AB, a company at the cutting edge of underwater technology. Here torpedoes and other underwater vehicles are developed and manufactured. The major customers are navies of different countries, mostly the Swedish navy. The aim of this master thesis is to develop, construct and evaluate an automatic Trim System for Unmanned Underwater Vehicles. The task of the system is to change the position of the centre of mass and the vehicle?s total mass or volume.

A recommendation for stand treatment of lodgepole pine (Pinus contorta) is, in a scientific point of view, lacking when it comes to harvesting for biomass energy. Within the next decades it is expected that 280 000 hectares of lodgepole pine will have reached thinning age on the domains of Svenska Cellulosa Aktiebolaget (SCA). Due to this the interest has grown rapidly for studying the possibilities of harvesting biofuel assortments already in the first thinning. In this study the distribution of the biomass within lodgepole pine trees has been studied and taken into account for estimating the proportions of harvested assortments when using different methods of thinning. The methods studied were conventional biofuel-harvesting (with delimbed branches gathered separately from the round wood) and thinning with cutting of round wood and long tops (incl.

ByggnadsInformationsModellering, BIM är ett komplext begrepp med varierande innebörd beroende på var i byggprocessen det används. Det finns ingen enkel definition av hur arbetet med BIM tillämpas och innefattar många aktiviteter. I rapporten har en litteraturstudie samt intervjufrågor legat till grund för resultat och slutsatser, dessa har riktats mot att ta reda på hur digital informationshantering anpassas till en byggnads förvaltningsskede och hur inventering av en befintlig byggnad kan utföras med dagens teknik. Genom att studera vad som tidigare skrivits inom ämnet samt med kontakter via personer som sysslar med konsultuppdrag eller förvaltningsadministration inom byggbranschen har en sammanställning av nuvarande tillämpningar kunnat visas. I grund och botten är BIM ett modernt arbetssätt som kan nyttjas av alla discipliner för att tillge information i ett projekt som även kan fortsätta att uppdateras vidare genom produktion, förvaltning, ombyggnader samt renovering, och slutligen rivning. Inventering av en äldre byggnad som saknar data kan återskapas med laserskannerteknik och ger en tillförlitlig datainsamling som sedan bearbetas i CAD-program. Forskning har skett för att försöka hitta ett sätt att lokalisera inbyggnadsmaterial utan att göra åverkan på byggnadskonstruktionen. .

Detta examensarbete utgår ifrån en artikel i vilken en metod för att skapa holografisk video beskrivs. Syftet med arbetet är att återskapa denna metod. Metoden bygger på projicering av hologram med hjälp av delar från en projektor, en laser och några linser.Först görs en litteraturstudie för att få förståelse över hur metoden fungerar. Här behandlas hur ögat ser djup och vilka olika typer av displayer det finns för att återge tredimensionella holografiska bilder. Vidare beskrivs skillnaden mellan optisk och datorgenererad holografi.

This thesis engages the topic of test methods for wood adhesives. Two test methods were evaluated, EN 302-1, a European standard, and ASTM D905, an American standard. The total amount of specimens manufactured and tested was more than 500. The adhesive bonds were tested in shear with an increasing load on the specimen until failure.The adhesives used were epoxy-resin, phenol-resorcinol-formaldehyde and a 2-K polyurethane. The test programme included five different types of intentional errors per method, in order to investigate the sensitivity of the test methods.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.