The aim of the study was to install a biogas system consisting of three tubular polyethylene biogas digesters at a rural household in Malawi and to evaluate the constructed biogas system with regards to relevant system parameters. The purpose was to evaluate if the technology is a possible solution to reduce deforestation and support Malawi in climate change mitigation and adaptation. The study was carried out in the southern part of Malawi in cooperation with the University of Malawi. Locally available materials were used to construct and install the system. Three different feed materials, cow, goat and a mix of cow and goat manure, were used in order to determine which one was best suited to utilise as a digester substrate. After the installation, measurements of temperature, pH, biogas production, biogas composition and system functionality were made. The results of the study show that a biogas system with tubular polyethylene biogas digesters can be successfully installed at a rural household and that the most suitable feed material is a mix of cow and goat manure.

Denna rapport beskriver arbetet med en utökning av ett dialogsystem till en UAV (Unmanned Aerial Vehicle, obemannad flygande farkost). Arbetet är utfört i WITAS-projektet (Wallenberg laboratory for research on Information Technology and Autonomous Systems), ett projekt som har som mål att utveckla en helikopter som ska kunna verka autonomt i t.ex. en trafikmiljö. Syftet med dialogsystemet är att en operatör med talspråk ska kunna ge kommandon till och få information från helikoptern. Detta examensarbete har som mål att utöka dialogen till att bli multimodal, dvs.

Pyometra (chronic purulent uterine inflammation) is a common disease in middle-aged and older intact bitches. The disease most frequently occurs in metoestrus and previous research studies have shown that both hormones and bacteria are involved in the development of the disease. Analysis of the blood levels of prostaglandin metabolite 15-keto-13,14-dihydro-PGF2? (PG-metabolite) has previously been shown to be clinically useful in the differentiation of canine uterine diseases such as pyometra and mucometra. The PG-metabolite concentration has also been correlated to severity in pyometra as determined by hospitalisation length. The purpose of the present study was to investigate if blood levels of PG-metabolite can differentiate uterine diseases such as pyometra from other diseases in female dogs.

Potato late blight is one of the most important potato diseases worldwide. The disease is caused by an oomycete called Phytophthora infestans. The host range of P. infestans includes potato (Solanum tuberosum) and hairy nightshade (Solanum physalifolium). Hairy nightshade has recently established itself as an important weed in the southernmost part of Sweden.

This report includes common helminths, symtoms, routes of infection, diagnostic laboratory techniques and prophylactic methods to prevent infection. We have pointed out where there is a risk of zoonotic transmission and how to avoid contamination and infection. We have restricted the number of species to the most common helminths. Some of these helminths do not naturally occur in Sweden (yet) but are nevertheless of current interest when we travel across borders with our horses, dogs and cats. The diagnostic part of our report tells about different techniques to find an occurance of helminths in samples of faeces, blood, urine or saliva from a horse, dog or cat. We also write about some recommendations on treating parasitic infections and the development of anthelmintic resistant helminths that originates from incorrect use of anthelmintic drugs .

The Swedish Textile industry has since the beginning of the 70-ties moved their production to countries with cheap labour further and further away. The production in the Baltic countries and Asia has become reality for many Swedish manufacturing companies. With today?s technology the communication with remote countries has ceased to be a problem. The difficulties have instead turned out to be more focused on transportation of goods and just in time deliveries to Sweden.

The purpose of this thesis was to design an electrical system for use in a ballistic test at the Swedish National laboratory of forensic science (SKL). The detector unit would use four main parts: coilsystem, transmitter, reciever and indicator. The coilsystem would be based on a balanced system using three coils. One that creates a magneticfield and the other two will sense the differences when a metallobject is in the coilsystem. This report starts out by investigating possible solutions for this specific task followed by a description of the physics that the metaldetector use.

This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

In the current situation a big part ofthe settlements that exist in Sweden isin need of renovation and energyefficiency in order to survive.Therefore, also many of the older houseswith a wooden structure are in a need ofenergy efficiency, which can be done ina variety of ways, including addinginsulation.This project deals with whether the useof a diffusion barrier or a vaporbarrier affects a wall structure byadding insulation to an older house witha timber frame. The insulation materialswhich are concidered in thisinvestigation are mineral wool and woodfiber insulation. Efforts are focused onthe effects of moisture on theseinsulation materials.To demonstrate the differences thatarise the moisture measurement programWUFI have been used to simulate avariety of wall designs. These designsare developed in consultation with theconstruction carers who are active inthe industry.Using WUFI graphs illustrating themoisture levels of the wall structureswere obtained and from these conclusionsvould be drawn. The work demonstratesthe differences that arise when using adiffusion barrier or vapor barrier inwall construction.

The current study aimed to test the public self-consciousness impact on creative performance. An experimental design was used in which 40 participants were randomly assigned to two groups, one of which was the experimental group and the other was the control group. A mirror was used in the experimental group to induce public self-consciousness among the participants while they performed creativity tests. A consequence test was used where the participant had to give suggestions for the given scenario "What would happen if everyone became blind?" which was then measured in the number of proposals (fluency).

The current study aimed to test the public self-consciousness impact on creative performance. An experimental design was used in which 40 participants were randomly assigned to two groups, one of which was the experimental group and the other was the control group. A mirror was used in the experimental group to induce public self-consciousness among the participants while they performed creativity tests. A consequence test was used where the participant had to give suggestions for the given scenario "What would happen if everyone became blind?" which was then measured in the number of proposals (fluency).

Fuel produced from renewable resources is of big interest. In this project the difference between a few different renewable materials are compared on the matter of environmental load when ethanol is produced. The renewable materials that are compared are Salix, straw and reed canary-grass (rörflen). The cellulose in the material is cut down to small pieces and then hydrolysed so that the sugar from the cellulose can be fermented into ethanol. Tha amount of ethanols that is studied in this work is the smount of ethanol needed to cultivate 1000 ha. The functional unit in the report is 1000 ha.

The purpose of my examination work was to show the need for support for students with another mother-tongue than Swedish, so that these students would be able to get through mathematics tuition better. To achieve this purpose, I chose to start from the perspective that presented itself at interviews with two class teachers and two mother-tongue supervisors. I also chose to use the qualitative research interview as study method, as I tried to understand those informing me in a thorough and in-depth way. In my study I have had a sociocultural perspective as starting point where the conceptions teaching, language and communication, support and individualizing are central for the development of knowledge. The questions for my study during this process were as follows: What difficulties, according to the teachers interviewed can occur for second language students in mathematics? What ways and methods of working do the teachers chosen give priority to, so that   the second language students` results in mathematics will improve? The results from my interviews show that the difficulties with mathematics for second anguage students can be perceived as being dependent on a combination of reasons, where amongst other things language plays a central part.

Staden Sulaymaniyah ligger i den kurdiska delen av Irak och har på senare år utvecklats då många valt att flytta från landsbygden till den centrala delen av staden. Nybyggandet sker under tidspress och långsiktigt hållbara lösningar prioriteras inte. Målet är att ta fram ett hus som är anpassat för majoriteten av befolkningen och samtidigt få ett bra och energieffektivt inomhusklimat. En faktainsamling genomfördes för att ge bakgrundsinformation till projektet. Vidare gjordes en planlösning till huset i AutoCAD vilken har använts som grund till utformningen av huset och smarta lösningar.

Staden Sulaymaniyah ligger i den kurdiska delen av Irak och har på senare år utvecklats då många valt att flytta från landsbygden till den centrala delen av staden. Nybyggandet sker under tidspress och långsiktigt hållbara lösningar prioriteras inte. Målet är att ta fram ett hus som är anpassat för majoriteten av befolkningen och samtidigt få ett bra och energieffektivt inomhusklimat. En faktainsamling genomfördes för att ge bakgrundsinformation till projektet. Vidare gjordes en planlösning till huset i AutoCAD vilken har använts som grund till utformningen av huset och smarta lösningar.