Individual cellulose ?bers were studied to identify the transport and absorbtion phenomena as well as the in?uence of drying. A Chalmers University of Technologydeveloped method within ESEM (Enviromental Scanning Electron Microscope) has been used in this study. The results from the Laborations gave the following conclu-sions: The transport of water occurs in ?bers in the ?ber wall surface and the lumen.

Syftet med denna studie är att undersöka hur laborativt arbete i tekniska och naturvetenskapliga ämnen påverkar elevernas lärande på gymnasiets tekniska program. Studien syftar vidare till att undersöka om Laborations utformning påverkar elevernas deltagande, samarbete samt deras instruktionsuppföljning. Både kvantitativa och kvalitativa mätningsmetoder användes i undersökningen såsom observation, enkät och intervju. Undersökning genomfördes i en klass som går första året på teknikprogrammet. Resultatet visar att både styrda och öppna laborationer har sina fördelar.

Laboratory work is a big part of chemistry education in high school. During our student training placement we have noticed that the laboratory work is not fully utilized to develop students´ chemistry knowledge. This problem made us want to investigate how the laboratory work in chemistry could be set, to become more meaningful for students. We introduced two preparation methods, and examined the outcome of students learning experiences and their acquisition of chemistry knowledge. This was examined both through surveys and observation.

Examensarbetet syftar till att jämföra nya alternativ till olika system för användning i laborationer i reglerteknikkurser för olika studentkategorier. Det skall utredas vilket av ett antal alternativ till mjukvaruplattformar som är bäst lämpat att användas vid reglerteknikundervisningen i ITN:s reglerlaboratorium vid Linköpings universitet. Tidigare laborationer i berörda kurser skall även modifieras så att dessa kan genomföras i de nya systemen.Examensarbetet resulterade i en rad modifierade laborationer och system att tillämpa i dessa. De nya systemen medför att all reglering sköts direkt från en dator istället för tidigare variant med externa apparater som programmeras. På så sätt kan större fokus läggas på regleringen i sig och inte de system som tillämpas för att utföra den..

In this report you can get a complete instruction about how to build your own development system for the PIC-processor. This card will be used for Laborations for the students at LITH-ITN. With this card you can send new assembler codes (new instructions) down to the microprocessor via the Serialport on your computer. Then the new instructions for the microprocessor will start to execute. We made a solder paste stencil at Campus Norrköping solder paste stencil laboratory.

This report discusses the development of lessons based on Laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This report discusses the development of lessons based on Laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This report discusses the development of lessons based on Laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This report discusses the development of lessons based on Laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This report discusses the development of lessons based on Laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This report discusses the development of lessons based on Laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

Den här rapporten tog sin början i det faktum att många företag och organisationer idag inte är insatta i vad IPv6 innebär och hur de ska gå tillväga för att implementera IPv6. Det fanns vid tillfället ingen komplett metod för hur en analys av ett nätverk gick till, vad som var viktigt att tänka på, vilka tekniker som fanns tillgängliga och hur dessa implementerades.För att underlätta framtida övergångar till IPv6 bestämde vi oss för att utveckla en generell metod som användaren kan följa och läsa sig till vad de behöver tänka på vid varje steg. Metoden ger också exempel på hur användaren kan göra analyser och undersökningar som leder fram till en lösning som kan fungera för deras behov. Metoden besvarade frågeställningen ?Vad behöver ett företag göra för att kunna implementera IPv6 i en existerande nätverksmiljö??Övergången till IPv6 är igång och många tekniker är inte färdigutvecklade.