The first part of this essay is about a single-family house that we have planned and projected. Thesecond part is a deeper study in ways to further insulate windows when they are not in use.In the first part the building?s design and its most important construction elements are described.The planning of all major installations (heating, domestic water, ventilation, sanitation, electricity)are reported so that one can in principle start construction of the house. In addition there arecalculations done on the building?s energy management.The result is a two stored house angled toward the south.

Vattenfall and Svenska Kraftnät perform start-up tests, where hydropower generators are used to power up the electrical grid in case of a blackout. To monitor the electrical grid, Phasor Measurement Units (PMU) are used. Each PMU is individually equipped with a GPS-receiver to precisely timestamp the data relative to the official time UTC. During the test, it is also of interest to timestamp the measurement signals from individual hydropower generators to later compare with PMU-data, and thus study the power grids impact on the generator. The aim is to work out an appropriate method to make these measurements and to build a data acquisition system, capable of timestamp data relative to UTC, from a generator in one of Vattenfalls hydroelectric power stations. The problem is that the generator is located in an underground station which hampers the reception of GPS-signals and wiring should be avoided if possible. Time synchronization has been solved by using Vattenfalls network, which is synchronized by the network protocol NTP.

The last two decades have changed the society from the Industrial Age to the Information Age. The technological development, especially in IT, has caused a ?Revolution in Military Affairs?. However; how big are the changes RMA will give, or will it even change the foundation of the Art of War and if so, in what way?RMA has three cornerstones DBA, DS and PE all closely integrated in an NCW-concept.

The main purpose of this Master's thesis is to investigate the new librarians' experiences and skills in the context of their present work situation and the ongoing debate about the librarian's professional identity and status. Further, the authors wanted to find out whether the new librarians' experiences and knowledge developed throughout their education correspond to the requirements of the employers. Finally, they try to assess theimpact of the "academization" of the library schools on the status of the profession. The data consist of an opinion poll. The investigation is based on questionnaires distributed as a web survey.

This Master Thesis has been carried out as a new product development project in collaborationwith G-Man Tools AB located in Edsbyn. The purpose of the project was to construct a newpruning saw there the blade is integrateble in the handle, thus a foldable pruning saw.The work has been performed on the occasion of G-Man Tools AB wanted to improve theirproduct range by creating a saw that complement their range of quality saws. They have a similarproduct today, but they do not manufacture this product by them selves and it is not directlytargeted against garden use, which is a disadvantage when it is one of their major markets.Even though almost the entire chain from the requirements of the users to drawings has beentaken into consideration, emphasizes has been put on generating ideas. However the first thingthat was carried out was to establish a productspecifikation from interviews with users and thecompany?s experience.

Denna studie handlar om invandrare med olika akademisk bakgrund såsom exempelvis läkare, ingenjörer, jurister, lärare, revisorer och sjuksköterskor. Syftet med uppsatsen är att undersöka upplevelser hos invandrare med akademisk utbildning, i vilken de har fått med sig från sina hemländer. Vi vill således se hur deras situation ser ut på den svenska arbetsmarknaden, avseende inkludering och strategi. Därtill vill vi ta reda på informanternas synpunkter på möjligheterna att lyckas eller misslyckas med att etablera sig inom ett kvalificerat yrkesområde. Vi har använt oss utav en kvalitativ metod.Valda teorier lyfter upp relevanta synpunkter för inkludering på arbetsmarknaden hos invandrarakademiker i denna studie.

This report presents an independent thesis corresponding 15hp and was carried out on Högskolan in Halmstad during the spring of 2014. The thesis is the final course which ends a three-year mechanical engineering program with focus on technical design.The thesis started in an operation which electricians are exposed to every day. The operation in question is cable laying or wiring. The tool they use is called a tension spring and is a long and stiff wire, usually made out of nylon or fiberglass. The tension spring is fed through pipes in the walls and brings the desired cables with it on the way back.

The purpose of this study is to explore specific pedagogical activities that benefit the student's verbal language development and to learn more about how our schools use teaching methods to achieve the ambitions in the governing documents in Sweden. The aim is finding the correlation between theory, research, governing documents and the educational work in our schools. This study contains an empirical survey in intention to see how teachers, pupils and school administrators experience school activities, to see if those activities are formed with the intention for pupils to reach the learning goals according to the governing documents.The aim of this study has been achieved by relating empirical data with theories and previous research on conversation analysis. Goffman's and Norrby's research on the importance of dialogue and previous research on dialogicity studied by Dysthe, Vygotsky and Bakhtin are presented. Those are related to empirical data and show that most teachers realize the importance of integrating dialogues in daily activities and in different learning contexts.

The health care sector is one of the most information-intensive institutions in Sweden. Big investments in information technology have been made to ensure efficiency and quality within organisations in health care. This has led to high requirements in documentation and resulted in an increase in administration which gradually more often is done by nurses and doctors. A major problem is that it is difficult to gain access to the information recorded in all the different systems, which is their objective. This causes double documentation instead of being a support in follow-up performance.

Wallyfy is planned to be a social webmagazine with a focus on good content, with a quality check and moderation of the published content. The author of the study provides Wallyfy with thoughts and ideas about the website content and functionality. The main problem of the study was to explore what makes good content in social media for the potential users of Wallyfy, also using this insight to provide Wallyfy with directions for making decisions regarding both functionality and content. The theory of the study is being used as a starting point for understanding the phenomenom social media and to easier grasp the problem. The method of the study is based on user- centered thinking in design, where the author seeks to understand the participant?s emotions, values and dreams.

The Swedish retail business has been characterized by a small number of ruling distributors. These distributors have been affected negatively by the internationalization which has made it possible for international distributors to establish their stores in the Swedish market. These international distributors are focused on low price stores. Their establishment on the Swedish market has led to a decrease in market shares for the Swedish distributors, which has damaged their profitability. Another change that has affected the Swedish distributors is that the behavior and needs of the customers has changed.

The aim of this thesis is to study a number of standards and theories, from the two research areas human-computer interaction and psychology, about how a graphical user interface (GUI) should be composed in order to facilitate interaction between humans and computers. Special emphasis is put on how the GUI should take into consideration the strengths and limitations of human cognition and perception. A study of three web catalogues shows how these theories appear when concretised. The following questions are answered in this thesis:What guidelines and styleguides can be found that specify the design of a user-friendly GUI?How do a few library catalogues on the web match a selection of these design principles?The guidelines are extracted from literature concerning human-computer interaction, psychology, automated library systems and web design.

This report shows the process of the development of a sensor module for the seed drills of Väderstad Verken AB. The module is supposed to replace existing solutions, provided that it is better from both a constructional- and an economical aspect. The purpose of the sensor is to continuously give the driver information about the level of height of the front- and drilling tools and the main purpose of the sensor is to allow the seeds to be placed at the desired depth. The sensors which have been taken into consideration have all been of an analogue type and have a protection class of minimum IP67.The methods applied have been taken from the book ?The Mechanical Design Process? by David G.

SEP Modular Armoured Tactical System is the next generation of military vehicles developedby BAE Systems Hägglunds AB. At present time, BAE Systems Hägglunds AB aredeveloping a 6-wheel electrical hybrid and a conventional 8-wheel vehicle. The questionformulation was summarized as: ?In which ways can the electrical transmission in a hybriddriveline for SEP be designed, when the surrounding fixed interfaces are kept and the unity ofcomponents within SEP is maximized??. The purpose of this master thesis was to study avariety of concepts for hybrid propulsion.

Communication between parties in an important process in their relationship can be based on a contract. This communication can for exemple be composed by a handwritten contract or an electronic contract. Contract law makes no difference between these two forms. to create more favourable requirements for commencing a contract or an ongoing contract there are possibilities to use standard agreements. Therefore a contract can be based on the will of the parties or on a standard agreement.An electronic signature shall secure that electronic transferred information has not been altered and also to identify the sender of the information.