This thesis has been made in cooperation with the forestry machinery producerEco-Log in Söderhamn. The focus of the thesis has been to find a cheaper wayto open the large engine hood of the company?s harvesters. The goal was tofind a solution that could increase the value for the customers by being saferand simpler to use, or, at the least, keep these values at an equal level comparedto the previous solution.In order to make it possible to CE-mark the new solution, it was importantMachinery Directive that came into effect from the beginning of 2010.To begin with, a specification of requirements was set up. Thereafter, anumber of different basic concepts was retrieved and evaluated.

The aim of this study was to provide SCA Forest Norrbotten District with material to assist in their work towards decreasing the frequency of bucking splits in their saw timber logs. SCA Forest supplies the Munksund sawmill with pine timber. Periodically the sawmill experiences problems related to bucking splits in their logs. The purpose of this study was to find an available method to measure the occurrence of splits directly on incoming timber. The ambition was also to gain some knowledge about possible variations between different logging crews in terms of split frequency. If possible, this information could be used to investigate if certain crews produced more splits than others, and thereby making it possible to provide feedback to the logging machine operators. The study consisted of two major parts, a literature review, and a practical sawmill study.

Good comfort for the driver of a construction machine is crucial. Gearshift comfort is an important part of the total comfort. Volvo Construction Equipment Components has a simulation environment of the powertrain, SimPow, which is implemented in Matlab/Simulink. SimPow is mostly used for simulation of control strategies and performance. In order to be able to study gearshifting comfort, Volvo has an interest in developing new models for SimPow.

This is a degree project performed at Halmstad University in Sweden on the subject carpet ofreinforcement. This project is developed in association with Celsa Steel Service in Halmstad.The purpose of this report is to investigate how much time that can be saved if carpet ofreinforcement is used instead of the traditional way to work with reinforcement and seewhat kind of parameters that is important between the choices. We are also going to seehow this product affects the situation for reinforcement workers from an ergonomic point ofview.Carpet of reinforcement is made by straight reinforcement?s bars that are welded togetherwith steel bands. These rolls are made at a factory with a machine that welds together thebars in determined centre distance, with desired dimensions after the constructionengineers? blueprints.

This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.

In Peter Weiss debut Fra?n o? till o? (1947) the ?I? travels from island to island as a castaway. The island here can signify, or work as a synecdoche for exile and the feeling of isolation that exile often induces. But the movement from island to island also implies a restless state: Peter Weiss shifting from painting to writing to filmmaking and theatre, from German to Swedish and then back to German. The years during exile and the years that followed the exile until his breakthrough in Germany with Schatten des ko?rpers des Ku?tchens (1960), Abschied von den Eltern (1961) and Fluchtpunkt (1962), were the formative years of Peter Weiss authorship.

När ett haveri inträffar uppstår direkt en mängd olika kostnader i form av underhållsinsatser, reparationsmaterial och administrationsinsatser. Utöver dessa kostnader förloras även de intäkter som maskinen genererar samt täckningen för de fasta och rörliga kostnaderna. Alla dessa kostnader skall täckas av de värdeskapande enheterna på företaget och påverkar det finansiella resultatet negativt. För att förbättra ett företags lönsamhet ökas antingen intäkterna eller så reduceras kostnaderna. Trots detta är det för många företag okänt hur stor kostnaden faktiskt är då en maskin står stilla.Arbetets uppdragsgivare är Konecranes Machine Tool Service (MTS), ett företag som erbjuder underhållstjänster och underhållslösningar till företag inom verkstadsindustrin.

Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.

In Peter Weiss debut Fra?n o? till o? (1947) the ?I? travels from island to island as a castaway. The island here can signify, or work as a synecdoche for exile and the feeling of isolation that exile often induces. But the movement from island to island also implies a restless state: Peter Weiss shifting from painting to writing to filmmaking and theatre, from German to Swedish and then back to German. The years during exile and the years that followed the exile until his breakthrough in Germany with Schatten des ko?rpers des Ku?tchens (1960), Abschied von den Eltern (1961) and Fluchtpunkt (1962), were the formative years of Peter Weiss authorship.

A study was carried in conjunction with the Orthodontic department at Halmstad General Hospital in Sweden to investigate the possibility of reducing cost and manufacture time of dental implant drill guides. The current system involves sending a digital image in STL format to the Materialise factory in Belgium where information of the position of dental implants is translated onto a moulded mouthpiece. Drill guides are placed in the mouth piece which is then returned to the surgeon. The mouthpiece complete with drill guides is then placed in the patients mouth and used as a guide for the implant drill holes. The cost of 10000 sek and a turnaround time of 2 weeks gave rise to the need for a faster and cheaper solution.

AbstractManagement is a field that started getting attention in the beginning of the 20th century by Frederick Taylor. His publication is called the Principles of Scientific Management and is based on the principles of using scientific methods to find the best way of conducting each operation within a production facility. Many of Taylor?s principles may appear obsolete today but the matter of an effective material flow is still highly current. Efficiency is the relationship between the input into an operation and its result.

När ett haveri inträffar uppstår direkt en mängd olika kostnader i form av underhållsinsatser, reparationsmaterial och administrationsinsatser. Utöver dessa kostnader förloras även de intäkter som maskinen genererar samt täckningen för de fasta och rörliga kostnaderna. Alla dessa kostnader skall täckas av de värdeskapande enheterna på företaget och påverkar det finansiella resultatet negativt. För att förbättra ett företags lönsamhet ökas antingen intäkterna eller så reduceras kostnaderna. Trots detta är det för många företag okänt hur stor kostnaden faktiskt är då en maskin står stilla.Arbetets uppdragsgivare är Konecranes Machine Tool Service (MTS), ett företag som erbjuder underhållstjänster och underhållslösningar till företag inom verkstadsindustrin.

In today?s modern age, energy consumption has become a major issue, both from an environmental viewpoint and cost perspective. Because of a rapid technologic change and increased costs of production of electricity, the demand to develop effective methods for energy efficiency industries have grown.The electricity-intensive industries, such as plastic industry, the demand to reduce energy consumption has grown significantly over the past 10 years, which have led to the development of different methods to determine and locate energy-consuming parts in the industry. This also means being able to prioritize and organize activities in the industry.In this study the measurements of voltage, current, power and PF performance on injection molding machines (K-TEC 275 form Ferromatik Milacron in Germany) with a focus to locate, within a machine, various measures that could improve energy use in the plastics industry, in this case RostiGP in Gislaved. These measurements have been carried out with the help of a power quality clamp meter to carry out time logs of the machines for some time during normal word rate.

Titel: Omvärlden påverkar: En studie av hur revisionsbyråernas marknadsföring har påverkats av den avskaffade revisionsplikten för mindre och medelstora företag.Nivå: Kandidatuppsats i företagsekonomi; MarknadsföringFörfattare: Reine Haddad och Louise MattssonHandledare: Jonas KågströmDatum: 2012- JuniSyfte: Med uppsatsen vill vi undersöka om revisionsbyråernas marknadsföring förändrats i samband med att revisionsplikten för mindre bolag avskaffats, det vill säga om marknadsföringen påverkas av omvärldsfaktorer.Metod: I studien används en abduktiv ansats där information samlats in dels via Internet (WayBack Machine) och dels genom att ta del av annonser från en revisionsbyrå. För att tydliggöra materialet sammanställdes det i frekvenstabeller, wordles och diagram.Resultat & Slutsats: I enlighet med vad den valda teorin framställer ser vi att även revisionsbyråerna ändrar delar av sin marknadsföring när förändringar i omvärlden sker. Omfattningen av förändringarnas påverkan på marknadsföringen varierar från revisionsbyrå till revisionsbyrå, bland annat beroende på revisionsbyråernas syn på marknadsföring, hur stora förändringarna i omvärlden är och hur snabbt revisionsbyråerna tar till sig dessa förändringar.Uppsatsens bidrag: Vårt examensarbete har bidragit med att ge en bild av hur revisionsbyråernas marknadsföring påverkas av förändringar i omvärldsfaktorer. Detta kan vara användbart då marknadsföraren måste ta dessa omvärldsfaktorer i akt vid planering och utformning av marknadsföringen.Nyckelord: Revisionsplikt, revisionsbyrå, marknadsföring, påverkan och omvärldsfaktorer..

Forest biomass is becoming an increasingly important source of renewable energy, and thereby the demand is increasing. There is currently 213 000 km of forest roads in Sweden that could be suitable for biomass harvesting. Harvest of biomass along forest roads both provides biomass and maintains the quality of the roads. Currently, the volume of biomass along roads can only be assessed post harvest, chipping and industry deliverance. As the decision of whether or not to harvest should preferably be based on more than experience, the TJ-method has been proposed. The TJ-method is a subjective method to quickly determine the dry matter quantity with the assessment being conducted from the roadside.