The purpose of this thesis was to analyse, model and finally generate dynamic vehicular motions in a train. The objective with the analysis was to find important motions for a realistic train experience. The motions from the analysis were then weighted against possibilities for generation in a motion platform.A dynamic motion model was created to model the selected motions. The model was implemented in a simulation environment, more specifically MATLAB/Simulink. The simulation environment was used to simulate the model and to generate outputs to control a motion platform.

This project consists of an adaptation, trial and evaluation of a model for practicing. Based on prior research I created a model aiming mainly to raise a musician?s self- awareness around the different parameters a performance consists of. An additional wish was for it to simultaneously assist the musician in monitoring his or her progress. With video recording and self-evaluation as the two main parts I tried the model by using it over a period of three months.

In this report a model was constructed in order to determine how a number of covariates influence the gross domestic product, GDP. The covariates were chosen depending on their expected influence on GDP, for example education and life expectancy. The data used in this report are collected from the World Bank. The model to describe GDP has been calculated using multiple line arregression. In order to reach a reliable final model the number of covariates has been gradually decreased to eliminate insignificant covariates.

Examensarbetet undersöker huruvida en blisk kan förses med ett heltäckande tak över bladtopparna. En blisk är en skiva och blad som är tillverkat i ett stycke. Som referens under arbetet används en befintlig blisk från provkompressorn Hulda. Målsättningen med att förse blisken med ett tak är att taket ska stabilisera konstruktionen genom att förstyva bladen och höja frekvenserna för de lägsta egenfrekvenserna samt eliminera läckflödet över bladen. Under arbetet undersöks material, tillverkningsmetoder, tillverkningskostnader samt de risker som finns vid användning av den takförsedda blisken.

Detta examensarbete syftade till att utveckla ett koncept på en Rollator, ett gå-hjälpmedel för människor vars gång är funktionsnedsatt. Målet med arbetet var att förbättra utgångskonceptet med en smartare och mer tillverkningsvänlig design samtidigt som rollatorn får ett enhetligt design/formspråk. .

AbstractHudiksvalls coordinating model - a model to make cooperation easierCamilla Andersson and Åsa GradinThe purpose of this study was to examine the experience each one of the administrators have of their own new model in Hudiksvall to make cooperation easier for the three different administrations in Hudiksvalls municipality. The study will focus on the administrators experiences of Hudiksvalls coordinating design. Questions of the study were: How is the influence of the model on the rules? How is the influence of the model on expectations and parts? What kind of influence did the model have on the responsibility distribution? What kind of influence has the model on the responsibilities at the transfer of costs? To answer the questions of the study we applied a qualitative method, it was made through a standardization interview guide and open questions, with six of the dealing officers who works with the model. Some of the results wich can be discern are by an economic character, andfor the clients that they won`t be passed around the administrations in the community, they get the right help, quick and safe.Key words: cooperation, coordination..

This report present a working model for simulation of what happens to colors displayed on screens when they are observed through optical filters. The results of the model can be used to visually, on one screen, simulate another screen with an applied optical filter. The model can also produce CIE color difference values for the simulated screen colors. The model is data driven and requires spectral measurements for at least the screen to be simulated and the physical filters that will be used. The model is divided into three separate modules or steps where each of the modules can be easily replaced by alternative implementations or solutions.

This master thesis was conducted during the spring of 2014 at Atlas Copco Rock Drills AB in Örebro. The purpose of the thesis was to develop a simulation model of the rotation system for a hydraulic rock drill. In the future, the model will be used to investigate the phenomena called ?jerky rotation?. In order to validate the simulation model a test bench was designed and tests were made.

Sammanfattning Detta examensarbete grundar sig på idén om att stadens byggnader, och de arkitektoniska koncept som brukas, påverkar hur det offentliga rummet används och upplevs. Valet av arkitektoniskt koncept ger genomslag också på hur det offentliga rummet uppfattas, samt vilka prioriteringar som görs i den fysiska miljön i byggnadens närhet. Det handlar dels om att byggnaders skala, exploateringsgrad och verksamheter men också om att definiera vilka kvaliteter som är önskvärt, samt vad dessa begrepp egentligen står för. Examensarbetet ger ingen heltäckande översikt över stilformer och begrepp som förekommer inom arkitekturen och stadsplaneringen. Arbetets syfte är att visa hur koncept byggs upp, hur form definieras, samt ger exempel på hur detta kan appliceras på en specifik plats.

Målet med detta examensarbete var att ta fram en sittmöbel för utomhusbruk, som man kan ha ute i trädgården, på verandan eller balkongen. Syftet var att utöka Mazes produkt sortiment och göra en möbel som speglar företaget. Materialet är tråd av stål och är så pass stark att trots dess tunnhet att man kan bygga stabila konstruktioner. Tre skiss koncept togs fram och två av dessa tre valdes tillsammans med företaget att gå vidare med. Efter att ha utvecklat de båda stolarna så var Kent Johansson på Maze nöjd.

A multivariate cross-sectional model is used in this thesis to proxy for expected earnings and to estimate return on equity for 214 companies over the period 2009-2013, using Swedish data. The model, which has never been tested on Swedish data before, is first confirmed to function as a forecasting model for expected return. Furthermore, the model is evaluated through a comparison with two univariate models based on the assumption that return on equity follows a mean reversion process. Forecast accuracy is calculated as the difference of estimated returns and actual returns. The results show that the univariate models' forecasts are superior to the multivariate model's..

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

The reindeer planning system (Renbruksplanen, RBP) is a communication and planning tool designed for Sami groups. A key purpose of this is that it will act as a tool in consultation with other market players, including forestry. Sami groups have asked for a model of how this can be used in a flexible manner. With the Swedish Forest Agency as a project manager, a communication model for how to use the RBP has been designed. It consists of a number of points divided into ?before?, ?during? and ?after? the consultation.

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

Denna studie syftar till att integrera lämpliga funktioner och koncept typiska för sociala nätverkssidor i ett kommunikationsverktyg med avsikt att förenkla och stödja kommunikation mellan kollegor i team och projekt.  Designprocessen bestod av tre faser. I fas ett avgjordes genom en Pugh-matris vilka funktioner och koncept som hade störst potential för integration. I fas två integrerades dessa i en digital prototyp av det redan existerande kommunikationsverktyget Briteback. I fas tre identifierades användbarhetsproblem hos den framtagna prototypen.