In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

Lean Production har sedan länge enbart varit förknippad med tillverkningsindustrin och främst Toyota genom Toyota Production System(TPS). På senare år har Lean Production i allt högre grad introducerats och integrerats i tjänsteföretag under beteckningen Lean Service. Bankbranschen är en bransch där aktörer globalt anammat de bakomliggande filosofierna av Lean Production och Lean Service. I det här arbetet har en undersökning gjorts kring huruvida Lean Production existerar inom svenska banker och om så är fallet hur filosofierna inom Lean Production präglar bankerna. De tre bankerna som valts för undersökningen är de svenska storbanker Nordea, SEB och Handelsbanken.

This paper intends to examine the knowledge challenges in small IT companies which is going through rapid growth. The movement of information and knowledge is a social and very complex process. The challenge for technology is the social as information and knowledge requires. To believe blindly that technology will solve the problem is what many people think. In order to understand how technology can support information and knowledge management one needs to understand what information and knowledge is.

One of the most distinguishing features of contemporary globalisation is production fragmentation, a splitting up of the manufacturing of a good into several different stages. Production fragmentation creates new opportunities through vertical specialization; a country incapable of mastering the entire production process may specialize in the manufacturing of one separate part. The aim of this thesis is to examine to what extent international integration affects a country?s ability to engage in vertical specialization in an industry characterized by production fragmentation. The analysis focuses on the european integration process over the last decade, where countries in eastern Europe with relatively low labour costs have been integrated with more capital abundant western economies.

A report has been made at a company in Borås at a company called ACG Nyström. Thecompany is today international and is marketing advanced equipment, systems and furthereducation to the manufacturing industry. A part of ACG Nyström?s production is a machinethey call Unimat. ACG Nyström doesn?t just stand for the actual production of the machine,but also for assembling and installation of the machine at the final customer.

Major changes within the agricultural politics today have forced the dairy production to scaleup, in order to compete on a global market. This has resulted in a reduction in the number ofsmaller dairy farms in Sweden, from about 40000 to just over 4000 over the last 30 years. Thepurpose of this study Svenska mjölkbönder, snart ett minne blott? ? Markbygdensmjölkbönder i tankar om mjölkproduktionens nuvarande situation och framtidsutsikter, is topresent the opinions of dairy farmers in Sweden, regarding the Swedish dairy industry and therelation to their own dairy production. A secondary purpose is to problematize how theconsequences of pastures and cultural landscapes influences human society as dairy farms andgrazing animals are becoming fewer.

Sitka spruce (Picea sitchensis) is not considered to be a native species to Swedish forests. It´s origin is the pacific coast of Northern America, an area that is dominated by a coastal climate which makes it likely to believe that it would be well suited for growing in the south-west of Sweden. This study aims to investigate the gain in production that can be reached by growing sitka spruce instead of Norway spruce (Picea abies) in the county of Halland. A regression model based on data from forest experiments was produced to explain the gain in production. This model was based on elevation and annual precipitation. The model was then used to create a map layer in arcGIS that shows the gain of volume in comparison to Norway spruce in percent. An analysis was carried out to find what share of the forestland in Halland county that fell into four different classes of production gain.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

Many companies do not register all the stops that occur in a production plant, it often takes longer to report than to fix the problem. If no problems are registered, you cannot trace where the problems arise.This master thesis was performed at AcobiaFLUX and they have noticed an increased demand from their customers to trace problems raised in their processes. The aim of the thesis was to find out how a tool to monitor a process best could be developed. Then the most essential from the theoretical base was developed into a useful tool for operators. For the operators to know if the process utilizes the full capacity of a process, the tool presents a measure of the Overall Equipment Efficiency, OEE.

Introduction     Knowledge has come to be an increasingly important factor for both individuals in the labor market and companies in competition. When a person leaves an organization the knowledge often follows, and a knowledge gap is created. When knowledge is shared within an organization, the individual?s knowledge is available for all members of the organization. Knowledge can thus be converted from human capital to structural capital.

Drinking water from drilled wells has a high content of iron and other minerals in many places in Sweden. Questions about the association between the quality of drinking water and the health of dairy cows are regulary asked both by advisers and dairy farmers. There are so far not many studies published about the relevance for high iron content in water and dairy cow health and production. Therefore, the aim of this study was to investigate if there is a connection between the iron content in water and the health of dairy cows. Initially a literature study was made about iron and it´s function in ruminants.

Background: Society of today is characterised by greater dynamics and a constant demand for innovation and fresh ideas. This development is often named "the new economy" or "the knowledge society". Independent of how one chooses to name this society, most individuals seem to agree upon the fact that knowledge grows more and more important. New competencies, such as new knowledge and new forms of organising, will be demanded for corporations to be successful in the future. In recent years it has become more common with corporations based on projects.

This paper is about the new methods and metrics used in industry and business today striving for better revenues and larger market shares. It investigates the relations between the old fordistic and tayloristic way of manufacturing and compares it to the models used in industry today for being competitive, seeking to please customers and becoming more flexible. More specific the paper is about if Six Sigma and lean production are the key for succeeding these days. SKF:s factory in Gothenburg and other companies will make an example for how these methods are used in practice.The aim is to try to answer if these systems with inherited tools and methods are the right way to get the flexibility that is needed for being able to deliver the right goods to customers and market. For a company to be flexible decisions must be made fast and needed changes must be able to be done easy and without too large costs and investments.

The business world of today is characterized by the fact that knowledge plays a far greater role than it did before in the companies? production. In many companies, the human resources constitute the main part of the total assets. It can for example be the employees? knowledge, competence or power of initiative.

The purpose of this report was to compare Lilluns egg production with other Swedish egg producers based on the flow of nutrients (nitrogen, phosphorus and potassium) in the egg production systems. The main focus in the report was the utilization rate of the forage and the excess of nutrients per kg egg. Additionally, the purpose was to identify the environmental impact from Lilluns egg production and compare the results with other egg producers. The inflow of nutrients associated with forage and poultry was compared with the nutrients that were exported from the production. All of the egg producers in this study had an excess of nutrients.