This paper aims to determine what is decisive for localisation of production units when a company engages in offshoring. By performing a case study on Electrolux and comparing the results with theoretical literature we discuss the implications for manufacturing companies in general. To facilitate a structured analysis we have developed a model dividing the localisation decision into five perspectives and four geographical levels. We have found that the determinants of localisation vary depending on the geographical level of the decision process. Since all geographical levels are interconnected, the analysis needed for a decision on all levels simultaneously is very comprehensive.

Background: To be better able to meet the new competition, companies are seeking new competitive advantages, wich is forcing them to review and, in time, change both working methods and corporate structures. This has led to an increased interest in the development of strategies within the field of Knowledge Management. Objective: The objective of this thesis is to improve understanding of how learning in a company occurs over internal boundaries and to investigate whether individuals need to be motivated in this regard. We also aim to give recommendations as to how this can be developed. Furthermore, we will work out a model that explains the learning process.

Successful broiler production in hot climates requires knowledge of how birds are affected by heat stress. It is important with access to water and good ventilation to facilitate coping with the heat. It may be useful to reduce the consumption of feed during the hottest hours of the days, which together with a few hours of extra light available could improve both productivity and animal welfare. The vision in birds is superior to that of humans and most other mammals. Continuous light and light with low intensity can cause eye injuries, affect the eye development in young chicken negatively, as well as provide increased incidence of foot pad lesions. Access to light affects the production but also the welfare of birds.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

There are many eco-brands on food products. It can be confusing for the consumer to know which one to trust or choose and since July 2012, there is an EU law and a mandatory EU organic label that must be displayed on all food products marketed as organic, eco or bio.Organic brands from a consumer perspective have previously been studied in England. This is a similar study in the form of focus groups, to explore and examine how consumers perceive and trust organic brand or labels in Sweden. It also explores which knowledge consumers have regarding why a product has an organic brand and what it means.The study shows that consumers perceive organic brands by brand recognition rather than knowledge regarding what each label means. It also shows that the consumer is confused by and skeptical to the wide range of markings and symbols on organic food products.

Companies learn through their employees. In this paper I make research into how knowledge transfer and learning occur at Metso Paper Karlstad AB, which is a partly project based organization.The result is that there are many factors that affect the knowledge transfer in a company. Knowledge transfer occurs mainly between individuals within the company, but also between departments and other actors outside the company. In the gaps between these actors, there is a risk that knowledge is not transferred, which is an obstacle to learning. A great deal of the knowledge transfer and the learning is carried out through individual?s own drive and motivation.

The purpose of this study is to identify the points-of-difference that should form the basis for Bryggarsalen?s future marketing efforts. Bryggarsalen is a newly established conference business in Stockholm. To be able to identify these points-of-difference, Bryggarsalen?s marketing problems have been studied from the resource-based view, claiming that the source of sustained competitive advantage derive from a firm?s unique bundle of resources.

AbstractThe aim for this study is to establish how teachers and supervisors at the Child and Recreation Programme interpret the concept ?vocational knowledge?. It is also about how they substantially can see that the pupils are developing vocational knowledge, during their work placement training. The aim of this thesis is to create a base for teachers to work with continuing development in teaching practice. The empirical part of this study is based on interviews. Interviews were analyzed in three categories: definition of vocational knowledge, substantially developing in vocational knowledge and success factors. The result shows that knowing how and knowing why is salient in vocational knowledge.

The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

The purpose of this study was to examine whether a L2 learner could correct or imitate structures of the language that they could not produce in written production defined by processability theori levels.The Informants had Arabic as their mother tongue. The study showed that the ability of correction developed slower than the capacity for imitation and the ability to written production. The ability of the correction developed by the duration of the stay. The result was a confirmation of theory formation in processability theory. Corrective elicitering could be developed into a useful diagnostic tool in the classroom and thus provide an education that followed a natural learning order according to processability theory by Pienemann.Keywords: processability theori, imitation, correction, written production.

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

The degree project is performed at Metso Kamfab. The production is aimed on machines everything from handling of fiber to paper pulp. Metso Fiber and Kamfab are using Pro/Engineer for design and blueprint production. The processing department types the NC-programs in notepad on the basis of the blueprints, the CAD-dates that already is there are not used. The aim with the work is to study if Kamfab can use CAM-system for processing and production of programs for their NC-machines.

District heating covers most of the residential areas and industries in the twoneighbouring Swedish municipalities Nyköping and Oxelösund. In Nyköping,Vattenfall AB Värme produces heat in a bio-fuelled CHP plant. In Oxelösund,waste heat and use of waste gases from the steel production at SSABOxelösund is the basis in the district heating system.This report examines the environmental consequences of a connection betweenthe two district heating systems. A broad system approach is used and the focusis on environmental effects in the system.A system analysis has been performed on the result of simulations of differentheat and electricity production alternatives. The alternatives simulated wereone where Vattenfall Nyköping covers the base load in the joint district heatingsystem and two where the power plant at SSAB Oxelösund supplies the heatbase load.The conclusion in this report is that the consequences of connecting the twodistrict heating systems can be both positive and negative, depending onsystem boundaries and on the environmental focus.

The organic farmland is increasing all the time and the goal is that 15 % of the Swedish farmland will be in organic production in year 2010. The organic production needs new and more effective ways to control weeds, and there is the row harrowing coming as a good complement to the conventional weed harrowing. In this experiment is weed harrowing whit different row spaces and row harrowing with a spacing of 25 cm compared. Then are the weed picked and the weight taken of them. The yield is compared in the 7 different ways of treatment. The results is not showing any significant differences in yield even when the row spacing is 25 cm instead of 12,5 cm. Even the spring wheat that is a sensitive crop and has bad tillering is doing well in this experiment. Now with modern technology where the row harrow is controlled by a camera that making the row harrow to follow the rows is it the soil coverage of the crop that is the limit for the speed. With wide machinery is the very good coverage even with a row harrow..

The energy sector of modern time is currently faced with several challenges. These are both production oriented and environmental oriented in nature. The energy of the future is intended to support an increasing demand while at the same time reduce its environmental affection. This stresses a development towards production methods of renewable energy. Among the existing methods, biogas is presented as an attractive alternative.