Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

The relationship between employer and employee is, from a judicial point of view, governed primarily by economic and employment contracts. However, a significant part of the dynamic is also dictated by tacit expectations and promises (so called psychological contracts). The aim of this study was to investigate the relationship between perceived organizational support (POS) and psychological contract violation. Primary hypothesis assumed that there was a correlation between higher perceived organizational support and a reduction of feelings of violation from psychological contract breach. It was also assumed that employment time, sex and past breach experiences correlated with feelings of violation.

In this study I investigated whether the strength in the manual response for emotional and neutral stimulus search arrays can explain some of the difference in reaction times (RT:s) for emotional stimuli, or not. Earlier, perceptual, cognitive and attentional processes has mostly been used to explain the variance in RT:s. Thirtythree individuals were asked to, as fast as possible, detect a target picture among distractor pictures in 3 rows x 4 columns arranged search arrays. The pictures were categorized in fear relevant animals (snake, spider) and neutral animals (cat). The results showed, more correct responses for cat target.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

This technical report describes the master thesis in material engineering called ?Testing of surfaced hardened materials conceivable for gears and shafts?. The work extents 20 academic points. Land systems Hägglunds manufactures and sells different kinds of combat vehicles and terrain vehicles. Since the demands for bigger and stronger vehicles increases all the time, so are the demands on shafts, gears and other transmission details.

Syftet med denna slutreflektion är att visa problemen men även möjligheterna i marknadsföringen av spelet Forced2Fight av det lilla teamet i Kick the Owl Productions. Begränsad budget, osäker framtid för både team och spel är något som måste övervinnas. För att kunna angripa dessa problem har jag studerat en rad olika tillvägagångssätt och kommit fram till ett lämpligt tillvägagångssätt riktat åt gräsrötterna för att bygga upp varumärket. Den effektivaste strategin bör i min mening vara att marknadsföra gruppen via traditionella medier och förankra spelet i den relevanta målgruppen direkt via fora och andra sociala medier. Kontakta både framträdande medlemmar i sociala grupper samt expertgrupper bestående av kunniga spelentuseaster.

The thesis project is accomplished during winter and spring 2008 at Karlstad University at the faculty of technology and science. The tutor at Karlstad University is Nils Hallbäck and the examiner is Hans Johansson. Rolls-Royce at Kristinehamn in Sweden is the initiator for the project. The thesis project title is design of the blade bolt joint on Kamewa CPP. CPP stands for controllable pitch propeller.

The current study sought to examine if post-produced semantic memory cues are a good aid for memory recall. It also focused on remembering units with a meaning, instead of just remembering lists of words. In the current study a factual text was used where the participants were tasked with recalling as much information as possible either with the aid of cues (keywords written by the participants themselfs), computer with Internet or no aids at all. The results showed that keywords are significantly better for memory recall. The results were discussed in regards to modern models describing semantic memory.

Smarta elnät är en av lösningarna för att uppnå EUs klimatmål den s.k. 20-20-20-satsningen. Klimatmålen innefattar bl.a. ökad energiproduktion från förnybara energikällor och ökad energieffektivisering, detta anses nödvändigt för att hindra den globala uppvärmningen samt uppnå en bättre och mer hållbar framtid. Den elektriska energins svaghet är den begränsade möjligheten till effektiv och storskalig lagring. Eftersom den förnybara energin har en väderberoende produktion ska smarta elnät hjälpa konsumenten att styra energikonsumtionen efter hur energiproduktionen varierar.

The purpose of this thesis is to test whether firms have target capital structure, and if so with what speed they adjust toward this target. Findings that support this purpose are also in line with the trade off theory. One of the key elements of this thesis is the method used, which successfully enables fulfilling the purpose. The panel data method captures the data characteristics of the cross sectional and time series dimension. By using this approach the dynamic effects of capital structure can be studied, thus if there actually is an adjustment towards a target the speed can be estimated.

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

This is a technical report about cement stabilization in general and the stabilizationprocess during the construction of a warehouse in Halmstad, Sweden in particular and iswritten at the section for economy and technology at Halmstad University incollaboration with NCC Anläggning.NCC encountered variations in compression strength in the stabilized material on the firstwarehouse that they constructed for the company Biltema. In our report we used thestabilization process of the second warehouse for the same company as a reference todetermine what could be done to get a more homogeneous result for future projects.We also looked in to what testing method is the most suitable to determine the result ofthe stabilization.After interviews with people involved in the process and visits on the work site we havecome to the conclusion that the most probable cause to the variations in compressionstrength is segregation in the ballast material. This segregation can occur in severaldifferent occasions in the process such as during the production, transportation andhandling on the work site.Other causes for the variation can be improper compaction, overlapping stabilization insome places and different duration of hardening of the samples that are tested.The best way to do in situ test of the stabilized material is to do seismic investigations asthose are non-destructive tests in comparison to taking core samples and you can discoverany cracks or air bubbles in the material..

With knowledge of how the southern Swedish forests have been affected by storms the past years, this study intended to find out which factors affect the storm firmness of a stand the most. The study was based on data from stands in the, by the storm Gudrun, affected area. The results of the analyses that tested the stand factors that influence the amount of storm damage to the greatest extent showed that the storm sensitivity of Norway spruce stands were largely due to previous management actions. The factors that could be controlled by thinning and had relevance of storm damage standpoint, according to the results were; the dominant height, volume, basal area weighted mean diameter and stand age at last thinning. In this study, these results are not as clear for Scots pine.