This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

The aim of this report is to give a picture of how attitudes and behaviours of owners of environment cars look like and how they can be influenced. The alignment lies on environmental cars which run on biogas and ethanol which both are renewable fuels. The starting point is to sort out if it is environmental thinking that controls the choice and use of an environmental car. The feeling is that there are many other factors that can be more controlling, for example the price and the quality of the car. The result of the questionnaire survey which is the foundation of the report shows however that those who buy an environmental car do it mostly because of environmental reasons.

Stockholm has in recent years experienced a strong population increase but despite that fact, the demand for housing has not been followed by enough housing contracts. According to forecasts, growth in population will further be continued upward. With more condominiums than rental units on the market, new apartments are too expensive to live in. This creates unsustainable problems for those in lower classes of society. Creating a housing market in the periphery of Stockholm is not sustainable from a social perspective.

Syftet med det här examensarbetet är att undersöka om det är möjligt att överföra hallbyggnadsteknik till produktion av småhus för att sänka produktionskostnaderna. Studien visar att hallbyggnadsteknik enkelt går att överföra till en villa. Dessutom blir det billigare att bygga klimatskalet med vårt byggsystem jämfört med ett traditionellt prefabricerat småhus. Genom detta system kan den totala byggkostnaden för villan i jämförelsen sänkas med 3-10 % beroende på vilket fasadmaterial som väljs..

This thesis studies two instruments within EC-law, affecting asylum issues, the Schengen Convention and the Dublin Regulation. These instruments are developed as a result of the free movement of persons in the European Union, and the development of the free internal market. The member states are afraid of losing control of who is residing within their borders, as their border controls has been removed, and these instruments are made to protect the member states now that their own means of control are gone. The thesis explains the relationship between the free movement and asylum issues and shows the connection between them. Its focus is aimed at the free movement of workers and how the European court of justice has interpreted article 39 to increase the workers ability to move within the union.

To automate software testing is an investment, and that makes it important to have good knowledge about automation before an implementation is made. In this master thesis a study about automated testing is carried out. The study also includes a closer look at the testing tool TestComplete. TestComplete is one out of many tools on the market that is developed for automated GUI testing and the goal is to get a picture of how well the tool can adjust to CC Systems own applications. Studies show that it is hard to write lasting test scripts.

This thesis is done in cooperation with SWECO Energuide in Växjö. They have been assigned by SKB in Oskarshamn to renew their electrical power supply and the ancillary processing systems in their Central provisional storage of spent nuclear fuel, CLAB. Today in the CLAB facility, the spent fuel is cooled down with water pumps, driven by asynchronous induction motors, where the water is regulated by mechanical valves to the desired flow. After the upgrade, the engines will be powered by AC drives that can control the pumps by changing the rotational speed and thus change the water's cooling effect on the nuclear fuel. In this study, I investigated the interference AC drives causes the feeding network and how to go about averting them.

This report is a bachelor's thesis of two students from the Energy and Environment degree at KTH Stockholm. Grinda is an island situated Stockholm archipelago. Skärgårdsstiftelsen is landowners and manages the area. Grinda Wärdshus, a guest house located in the island, currently uses an oil-fired boiler as a heating system. The aim of this thesis is to investigate whether wood chips or pellets is, from a sustainability standpoint, a suitable heating method for the guest house.

This dissertation is performed at the request of Lagafors AB who develops and manufactures stationery and mobile hygiene solutions for companies in the food- processing industry. The objective of this dissertation is to develop and construct a new, cost efficient cleaning station based on an innovative technology.The technique is based on serially connected dosing pumps which allow the customer to work with concentrated detergents. This leads to serious reduction in the clients use expenses. Two units have been developed with this technique, one that is stationary and one that is mobile.The dissertation has led to good results which resulted in the sale of the first stationary unit of the Lagafors CPU before the end of this dissertation. .

As a guitarbuilder it is an advantage if you can control and understand what is creating the character of the tone. To approach this vast jungle of variables that controls the tone in a guitar, I built two guitars and in one, guitar 2, reduced the thickness of soundboard, back and sides.The purpose was to compare the guitars and establish if there was a significant difference and what it was, in the guitars ability to produce sound. The thought was also to try the thesis: loud but short, long but moderate tone. Also if a lighter built guitar has an advantage in producing a loud but short ton and vice versa.The instruments has been examined by five guitarist, one guitarbuilder and a professor in Speech, music and hearing at KTH in Stockholm.The relative obvious conclusion is that guitar 2 is a bit louder and has a clearer base and treble but the more part of the guitarists fancied guitar 1 better. This one has got more mass fore the tone to stay alive with.

The function of budgetary controls is to control the resource allocation within companies. It can also be an instrument for measure and control subordinates and/or business units? performance (Van der Stede 2001). This paper concerns the latter; when the budgetary control function is used to measure and control subordinates performance based on budget. Previous research in this area has not yet accomplished to explain the effects of tight budgetary control which Hartman (2000) considers as the main issue to be concerned about in management accounting research.Previous research has presented contradictory findings regarding tight budgetary control explained by positive effects as well as negative effects during the last decades.

AbstractAim: The purpose of this thesis is to research how women think about fashion in relation to their self and to others. Can clothes be an expression of who we are who we want to be and how we look at others? What are the main characteristics in this type of communication and what kind of information can be distributed using this tool?Method/Material: InterviewsMain results: Clothes can work as a tool to show who we are and what we are, mainly on short term. We use clothes for different purposes, sometimes we what to be seen and really show who we are and what we stand for and sometimes we just what to go with the flow and not be seen at all. We will always have a physical need for clothes but it is also a natural and important part of our individual expression and our identity.Keywords: Fashion, Clothes, Identity, Lifestyle.

The energy use in a workshop company has been examined in this work in order to find areas for energy efficiency improvement. The combined oil and electricity heating in the company were compared with other alternative heating systems including cooling of the premises in following combinations:Ground source heat pump for heating and coolingDistrict heating and absorption coolingDistrict heating and low temperate surface water coolingEnergy use, operation costs and carbon dioxide emissions were calculated for the current heating systems and the three alternatives including cooling. The ground source heat pump for heating and cooling decreases bought energy with 34 MWh annually compared to current heating only. The district heating and low temperate surface water cooling has the largest reduction of operation cost and carbon dioxide. The operation cost decreases with 42 kSEK and the carbon dioxide with 43 metric ton CO2 annually.

The function of budgetary controls is to control the resource allocation within companies. It can also be an instrument for measure and control subordinates and/or business units? performance (Van der Stede 2001). This paper concerns the latter; when the budgetary control function is used to measure and control subordinates performance based on budget. Previous research in this area has not yet accomplished to explain the effects of tight budgetary control which Hartman (2000) considers as the main issue to be concerned about in management accounting research.Previous research has presented contradictory findings regarding tight budgetary control explained by positive effects as well as negative effects during the last decades.

Industrial buildings are increasing all over Sweden. Farmers are building new modern facilities and the government chooses to build new halls to invest i youth sports. Glulam is the most common framework but there are limitations because of the transport. Therefore, there is a need to develop new solutions to increase the use of glulam.The maximum torque in the eaves was found in the frame with a roof pitch of 18 degrees and a wingspan of 25 meters. Using hand calculations according to Eurocode and comparison with the computer software StatCon, the maximum torque, shear force and utilization rate is calculated.