This thesis examines the environmental benefits resulting from the choice of environmental certification scheme, with focus on energy. This was carried out by studying the measures that were implemented as a result of the certification of Sweco's three largest office buildings in Stockholm, Gothenburg and Malmö. The office property in Stockholm has been certified with the Swedish Environmental Building, Gothenburg with the British BREEAM and Malmö with the U.S system LEED.The results from the study indicate that an environmental certification can reduce the energy consumption by up to 59 percent and the water consumption by 20 to 66 percent. However; the interviews, literature study and simulations in MATLAB indicate that the size and scope of these environmental benefits depend on several identified factors: the type of building and its conditions, system selection, grade level, the choice of indicators, the ambition of those involved and when in time the certification process begins. The comparison between Environmental Building, LEED and BREEAM showed that Environmental Building for the office property in Stockholm gave the largest environmental benefit in terms of reduced energy consumption thanks to several large measures.

Today's climate and environmental issues have now been up for discussion for quite long. Various environmental measures have been taken, but it is not always certain that those measures actually are for the better because of the complexity of our environment. Therefore, studies of whole life cycles are very important even if they are time and resource intensive.Real estate accounts for 15% of global carbon emissions, but also affects our environment in many other aspects. In Sweden this number is even higher. About 30 % of its carbon dioxide emissions originates from building sector and changes are therefore of great importance.

The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.

Today's climate and environmental issues have now been up for discussion for quite long. Various environmental measures have been taken, but it is not always certain that those measures actually are for the better because of the complexity of our environment. Therefore, studies of whole life cycles are very important even if they are time and resource intensive.Real estate accounts for 15% of global carbon emissions, but also affects our environment in many other aspects. In Sweden this number is even higher. About 30 % of its carbon dioxide emissions originates from building sector and changes are therefore of great importance.

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

The aim of this study is to examine how European companies? stock price is affected by an announcement about foreign direct investment in one of the BRIC countries. Another aim for the study is to examine if the market reacts differently to the three modes of entry methods in a given BRIC country and to examine if the market reacts differently to different European countries. The study also set out to answer if there were any effects of the three modes of entry that was visible a short time after the announcement. To answer and examine this, the authors used the event study approach. The study was conducted with a sample of 47 companies from France, Norway, Spain, Sweden and Germany.

The private sewage systems in Sweden releases around 600 tons of phosphorus per year, compared to about 350 tons from municipal sewage treatment plants, and they account for approximately 21% of the total anthropogenic discharge of phosphorus into Swedish waters. About 40% of Sweden's nearly 1 million private sewage systems are inferior with respect to emissions to surface and groundwater. The technology of small sewage plants is under development and knowledge of treatment effects for different solutions is poorly consolidated. Municipal authorities lack resources to keep up with the technologic development and assess the reliability of the treatment performances that suppliers report for their products. The thesis aims to conduct a market review and evaluation of wholly or partially prefabricated small sewage plants, to make it easier for municipalities and property owners to assess different technical solutions. The goal is a compilation of the products on the market, evaluated on the basis of the reliability of specified degrees of reduction.Information on sampling procedures and test results were collected through a questionnaire to all active suppliers and the responses were then used to classify the products.

We are two students at Malmö Högskola, writing our final essay for obtain our teacher diplomas. On our partner schools, we have been facing but little information about how to invite the parents to collaborate with the school. Our thought is that the schoolwork is favorable to the pupils if both school and home are working together side by side. Therefore, we decided to dig deeper into this matter of how one particular school is working with parental collaboration, to be able to see if their method is useful. This particular school is offering studies in a course form so called family class. Here the pupils can get extra help from remedial teachers and their parents are also invited.

AbstractDelta Terminal owns an outdated industrial building which they now rent out to businesses. This property currently has a high energy con-sumption and therfore it is desirable to improve the efficiency. In ordet to reduce the energy consumption within the industrial building enve-lope, the heating systems and lighting are being investegated. A good building envelope emits less heat and thus reduces the energy consump-tion. An energy audit is a tool used to determine the energy loss.

The aim has been to create a new student housing where there should be more togetherness between people who live in the residents. The house will have more common areas for the integration of students for a pleasant stay in Växjö. We have concentrated on finding and solving the interior design of the joint surfaces. The proposal consists of CAD- drawings.The student area is intended to be placed on the Brände udde, which is part of Campusvision 2005..

Omvårdnad ? Självständigt arbete I VOM080 VT 2008.

Genetic parameters for four leg conformation traits in dogs (Canis lupus familiaris) are in this literature review summarized to investigate whether selective breeding could be useful to improve purebred dogs´ health and welfare. The four traits are leg length, leg weakness, hip joint and elbow joint conformation. When summarized, the genetic parameters are compared with genetic parameters affecting in pigs (Sus scrofa). Of the four traits, hip and elbow conformations were mostly studied in dogs. However, these traits were not widely studied in pigs.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.