Åmotfors Bruk AB (ÅBAB) has today an inefficient production of steam for the manufacturing of paper. Unpredictable energy prices and modernisation of the current equipment has been the underlying factors to invest in a thermal power plant, mainly driven by garbage. This facility will not only use the steam for paper production, it will also generate electricity through a steam turbine. Today, when a fault on the supplying line occurs which leads to disconnection of the external grid, all the support of electricity to Åmotfors Bruk (ÅB) will disappear. This will lead to major interruptions in the paper production, which will cause severe economical losses.

The Swedish production of biogas was 1,5 TWh 2011. About half of the production was used as vehicle fuels. The cost for upgrading biogas depends on the size of the biogas plant and its gas production. If the gas flow is low the cost will be high. However, further development of existing upgrading technologies or development of new ones, have good potential to decrease the upgrading cost for small scale biogas plants.

Abstract Title: A messy story ? a case study of Secorocs process flow of DTH-pipes Presentation date: 2010-06-02 Course: Bachelor thesis in businessAuthor: Kristoffer ForsmanAdvisor: Kjell GustafssonKeywords: Management control, process control, lean production, process flow analysisPurpose: The purpose of this bachelor thesis is to develop an overview of the process flow for a specific product, and with the help of this mapping based on a lean production philosophy show possible improvement proposals and how these can lead to a more efficient process flow.Methodology: I have used a case study of Secorocs DTH-pipes and my primary data are gathered through interviews and observations. I have used theoretical framework to establish a process flow analysis. This is to obtain data on process activities and whether they are creating value or not. This leads to a current mapping of the situation in Secoroc on DTH-pipes and then analyzed and suggestions for improvement are developed.Conclusions: That by using the above mentioned mapping of process flow of DTH-pipes, problem areas could be illustrated.

High heels ? a fashion that has not gone out of style after hundreds of years. Despite their esthetic advantages, high heels become uncomfortable and harmful after repetitive and long term use. With this as a starting point, Huyen Nguyen ? a student at the Innovation Engineering Program at the University of Halmstad ? decided to make a final thesis project. The project goal has been to combine the esthetic advantages of high heels and bring a comfortable solution to the equation.

Detektion av gasläckor används i en mängd olika applikationer som till exempel kvalitetskontroll av kylskåp, lokalisering av skador på kablar och lokalisering av bränsleläckor i bränsletankar.Denna rapport undersöker förbättring av detektionsalgoritmen i en existerande vätgasdetektor.CUSUM algoritmen är en enkel men kraftfull metod för att snabbt detektera små ändringar i nivån av en signal. Denna metod är anpassad till det dynamiska beteendet i sensorn som används för att spåra vätgasläckorna och även utvärderad på omfattande mätningar utförda på läckor med kända storlekar. Resultaten visar att användning av den föreslagna detektionsalgoritmen innebär en betydande ökning av detektorns prestanda. Särskilt bra blir resultatet på små läckor..

Bakgrund: Lean Production uppkom som ett verktyg för att sänka kostnader och därmed öka konkurrenskraften på en allt mer hårdnad marknad. Synen på processtänkande och dess möjligheter har under senare årtionden ökat markant i intresse, däremot har ekonomisystemen inte förändrats i samma takt. Granlund (2001) menar att trots det starka trycket att förändra kalkyleringen använder många företag sig fortfarande av traditionella påläggskalkyler med direkt lön som fördelningsbas. Kaplan & Johnsson belyste redan 1987 problemet och argumenterade för hur traditionella kalkylsystem ger en allt för aggregerad och snedvrängd bild av verkligheten. Den debatt som uppstod är känd under namnet Relevance Lost.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Examensarbete, civilekonomprogrammet, Ekonomihögskolan vid Linnéuniversitetet, ekonomistyrning, 4FE03E, VT 2013Titel: Lean Productions påverkan på ekonomistyrningen - En fallstudie inom Gnutti   Powertrain ABBakgrund: Allt mer konkurrensutsatta marknader har inneburit att företag sökt nya sätt att utveckla och effektivisera sina verksamheter. Detta har resulterat i att många företag valt att införa produktionsstrategin Lean Production. Flera forskare har påvisat att den traditionella ekonomistyrningen inte är anpassad till och lämplig för företag som använder produktionsstrategin Lean Production. Detta har inneburit att den traditionella ekonomistyrningen måste förändras och utvecklas för att kunna stödja de förändringar som den nya produktionsstrategin ger upphov till. Därmed blev det intressant att studera ett enskilt fallföretag för att identifiera om och hur detta företag har förändrat sin ekonomistyrning till följd av användandet av Lean Production. Syfte: Syftet med denna studie är att utifrån det enskilda fallet Gnutti Powertrain AB bidra med en förståelse för hur ekonomistyrningens utformning och användning påverkas av användandet av den avancerade produktionsstrategin Lean Production.

Min uppsats är deskriptiv och inriktar sig på frågan om hur vetenskaplig socialpsykologisk kunskap används för att bekämpa motståndsgrupper i främmande land. Denna kunskap finns dokumenterad i Joint Publication 3-24 Counterinsurgency Operations 05 October 2009, sammanfattad av Joint Chiefs of Staff (den amerikanska militärledningen).Jag har gjort en analys av detta dokument i form av dokumentanalys med inspiration av diskursanalys, och jag låtit mig inspireras av Foucault och Fairclough. Dokumentet innehåller mycket intressant, läsvärt och tankeväckande socialpsykologiskt resonemang, som nu mera anses vara en viktig del av den amerikanska militärstrategin i lågintensiva krig mot motståndsgrupper i så kallade främmande länder. Dokumentet har till stora delar analyserats utifrån så kallade noder eller huvudbegrepp som används i diskursanalys, som exempelvis ledare, motståndsgrupp, subgrupp, emotion, kognition och kommunikation, men som också har använts för att binda samman mitt teoriunderlag eller perspektiv.I sammanfattande form vill jag hävda att jag har kommit fram till följande slutsatser; En slutsats är att militären visar hur viktigt de anser att kognition och emotion är, och hur intimt det hänger samman och är avgörande för att besegra en motståndsgrupp. En annan slutsats är hur kommunikationen påverkar ledaren och motståndsgruppens förmåga att få fram sitt budskap och få folkets stöd.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

Tourism and Hospitality Management.

The Sheep is the oldest livestock, and has been in Sweden for 4-5000 years. Thanks to that you can obtain skin, as well wool and meat. Therefore it was an important animal. Sheep production has increased, strongly lately due to the pasture support. The purpose of this paper is to find out what kind of different EU-subsidies you can get and to compare the subsidies in Öland and the main land. Sheeps are very good conservationist with grass, bushes and herbs, because of different grazing lands hardness and growth is it important to control the pasturage strain. A good way to regulate this is to have different enclosed pasture to switch between. I have been studying the different EU-subsidies.

Farmers are constantly facing changes, and the exposure to risk requires monitoring these changes. Financial risks, institutional risks, market risks and production risks are the different risk categories that the farmers face. Production risks stems from factors the farmer cannot affect or is beyond his control. The crop?s output is the basis for the primary income of agricultural operations, which is why it is important for farmer to manage their production risk. A tool to reduce the consequences of production risks is crop insurance.

In the early 1990?s more and more companies of the Swedish public sector were exposed to competition, and this started the debate on how such actions might affect the business and even society.The first chapter examines how the public sector and especially health care, is financed and managed. We also explore what it means to be exposed to competition and find that there are many different ways of exposing the public sector to competition. The study examines dental care as an example of a market with both publicly and privately owned companies. The purpose of this paper is to explore how publicly and privately owned health care companies view their relationship with their consumers.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.