Sökresultat:
512 Uppsatser om Isometric strength - Sida 30 av 35
Utvärdering av den bärande tegel- och betongstommen i en byggnad från år 1916
This Master thesis is about a postal- and telegraphic building in Eskilstuna, Sweden. The construction methods for the specific building and buildings in general from the same time are described. The purpose of the report is to describe the loads acting on the building and how it has been built and why it has been rebuilt during the years. After this, possibilities of reconstruction and adaptation for today?s demands can be evaluated.
Ställtidsreducering med hjälp av SMED i pressgjuterianläggningar
To maintain production in high salaries countries and strength in competition against other companies, it is today more important than ever to maximize production, offer a wide spectra of products and be able to deliver on the customers desire of shorter and shorter delivery time. Flexible production and short time spent on die changes is vital to achieve these desires. The interest for die changeover time reduction grew in the same pace as the demand for increased product variety grew. SMED as a method of reducing time spent on die changeovers were developed in between 1950-1970, by the Japanese Shigeo Shingo.The purpose of this thesis work has been to investigate the result of SMED in a die casting facility, and compare the result from it with the result considering time spent on die changeovers when investing in new equipment. The goal is to implement a thorough investigation by using the SMED method at Tenhults Pressgjuteri AB and make a brochure that have to be simple to understand, in purpose to draw interest to the advantages of using SMED as a method.Commissioned by the Swedish foundry association Swecast, the work has been carried out by studying die changeovers at Tenhults Pressgjuteri AB, where filming and interviews with the operators have been included in the analysis.
Är priset ett sätt att påverka mängd frukt och grönsaker i kosten?
Sahlgrenska Academyat University of GothenburgDepartment of Internal Medicine and Clinical NutritionAbstractTitle: Is pricing a way to affect share of fruits and vegetables in a diet?Author: Maria PopovSupervisor: Heléne Bertéus ForslundExaminer: Ingrid LarssonProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: May 23, 2013Background: Fruits and vegetables (FV) are important for health, including occurrence of diabetes, obesity and cardiovascular diseases. Said diseases cause most cases of illness and death in high-income countries. Only a small part of the population achieves the FV-intake goal, so a higher FV-intake is desirable. Besides general information campaigns there is another method of influencing what people might buy.Objective: To examine whether different pricing is connected to FV-intake or ?purchase.Search strategy: Databases PubMed, Scopus and Summon were searched with ?vegetable consumption", "price/pricing policy" and "food choice? in different combinations.Selection criteria: Studies performed after year 2000 on at least 18 years old persons from North America, Europe or Australia, examining changes in FV-price and -purchase.
Framtagning av beräkningshjälpmedel för tvärkraftbelastade förband med förbindare av metall.
The governing set of regulations for structural engineering in Sweden used to be Boverket, BKR. However in the beginning of the 21st century a changeover to new regulations, the Eurocodes, started.The transition was completed in year 2011 when the Eurocodes became the mandatory design work policy for all countries within the European Union. The Eurocodes were implemented to simplify and remove potential barriers to trade that may exist when countries have different design rules. Since the changeover it has been important for all construction companies to update their knowledge base and their design software.When comparing the two calculation processes they seem similar, but there are a couple of differences worth noting. With the new regulations, engineers will find that the process when designing joints in timber structures has changed. What used to be a fairly easy and straight forward calculation procedure has now become tedious and time consuming.The objective of this degree project is to present a product, a dimensioning tool that will help structural engineers when computing lateral load carrying joints in timber structures.The degree project is made up of two parts where the first part is the written report describing the background and theory behind load carrying computations. The second part of the project is the actual dimensioning tool which includes several worksheets in Microsoft Excel. The program treats single and double shear connections of the following:Nail jointsScrew jointsSteel plates (thick and thin types) The user can edit the following parameters:Type of plate/ number of shearsStrength class of timber membersMember and plate sizeType of fastenerDiameter of fastenerLength of fastenerYield moment of fastenerkmod and partial factors for design load carrying capacityThe dimensioning tool was created and developed in collaboration with structural engineers at the company Byggteknik AB.
Dammsäkerhetsanalys via stabilitetsberäkningar för Långströmmens kraftverk : En jämförelse mellan olika dimensioneringsmetoder
A detailed dam safety evaluation (in Sweden called FDU) was performed in 2009 by WSP where stability control was performed for Långströmmen power plant with associated spillways. This evaluation concluded that stability could not be ensured, and risk of sliding occurred. The evaluation is based entirely on the recommendations outlined in RIDAS, the power companies guidelines for dam safety, and it is clear that extensive renovations are necessary to stabilize the dam.In this work, the stability will also be checked with guidance through new proposals on guidelines for concrete dams sliding stability, ELFORSK?s report 08:59. This report considered the guidelines in RIDAS as oversimplified, both from an international perspective, but also with regard to the current state of knowledge regarding dam safety.
Det enskilda trädet som meningsbärare : erfarenheter av två trädplanteringsprojekt i Helsingborg
Individual trees can act as carriers of meaning. When a person attributes deep meanings to a specific tree, a relationship between the person and the tree is created. To avoid conflicts between users and planners, increased awareness is required of how important individual trees may be to a person. The objective of this study was to elucidate persons? relationships with individual urban trees.
Samhällen i Kris : När Washington Tar Över
Dissertation in political science, D-level by Niklas Andersson, Spring Semester 2010. Tutor: Malin Stegmann McCallion?Societies in Crisis ? When Washington Take Over?An economic meltdown wreaks havoc on the world and has plunged the Western world into a spiral of economic stimulus in order to keep their way of life intact. At the same time the same institutions that support these countries have had another agenda for more unfortunate and less influential countries where nothing has been free and everything been to a price of self-sacrifice in order to get the consent of the IMF and the World Bank. Everything according to the points stated in the so called Washington Consensus.The purpose of this dissertation is to research what impact the Washington Consensus has on the state in terms of power over the market and sovereignty.
MÄTNING AV ANDNINGSMUSKELSTYRKA - JÄMFÖRELSE AV NORMALVÄRDEN MELLAN NY OCH BEFINTLIG UTRUSTNING
1
MÄTNING AV ANDNINGSMUSKELSTYRKA
JÄMFÖRELSE AV NORMALVÄRDEN MELLAN NY OCH BEFINTLIG UTRUSTNING
ELIN KELLERSSON
Kellersson E, Jämförelse av andningsmuskelstyrke mätning på ny utrustning. Examensarbete i biomedicinsk laboratorievetenskap 15 poäng. Malmö högskola:
Hälsa och Samhälle, enheten för biomedicinsk Laboratorievetenskap, 2012.
Svaghet i andningsmuskulatur är vanligt hos neuromuskulärt sjuka, lungsjuka och hos vissa patienter som behandlas med steroider. Vid neuromuskulära sjukdomar utgör en progressiv försvagning av andningsmusklerna (främst diafragman) det allvarligaste hotet mot överlevnad. Andningsmuskelstyrkan kan mätas med hjälp av en spirometer, där det maximala inspiratoriska trycket (PI max) och det maximala exspiratoriska trycket (PE max) mäts med hjälp av tryckreceptorer vid en pnemotachograf.
Tystnad och Tillhörighet : berättelser om homosexualitet från 1980-talets Polen
There was a silence surrounding homosexuality in the People's Republic of Poland. One can almost get the impression that same sex love, and same sex relationships, did not even exist there; that the communists had successfully removed homosexuality from society. The roots of this silence can be found in the Communist Party´s disdain for anything deemed individualist and deviant, and also in the conservatism and religiosity of the Polish society.In my thesis I study when and how gays and lesbians found a way out of the silence that surrounded their sexuality. Gay men did so by creating subcultures, which found refuge in parks, public bathrooms and a few bars in larger Polish cities, and offered a sense of belonging for them. Lesbians, on the other hand, lacked this access to semi-public spheres, which made it even harder for them to find each other and create a space for their sexuality.
Redesign av reduktionsutrustning i asselvalsverk inom stålindustri : Ett examensarbete utfört på konstruktionsbyrån BEKAB mot stålindustriföretaget Ovako
Intresset för sömlösa stålrör med stora ytterdiametrar i förhållande till tunna väggtjocklekar har ökat tillsammans med att högre hållfasthet i olika stålsorter tillkommit. Detta gör det möjligt att tillverka lättare, billigare och mer materialeffektiva stålprodukter med samma eller högre hållfasthet som tidigare.Denna nya utvecklingsriktning medför förändringar och utmaningar i en av företaget Ovakos produktionslinor i Rörverk 5 Hofors, vilket de har behov av att samarbeta med maskinkonstruktionsföretaget BEKAB för att utvärdera och utveckla.I Ovakos produktionslina i Rörverk 5 finns en del av ett asselvalsverk som kallas för "förreducerare". Denna del av asselvalsverket ser Ovako ett stort intresse i att utvärdera och utveckla för att bättre anpassas till den nya utvecklingsriktningen. En känd utmaning hos förreduceraren sen tidigare är att den från början är framtagen för att reducera ner ett kvalitetsproblem hos rörprodukterna som kallas för trattbildning. Projektet fördjupar sig därför inom trattbildning för att bättre förstå grunden till förreducerarens nuvarande design för att därefter genomföra en redesign av förreduceraren.I en nulägesanalys av nuvarande förreducerare framkommer ett flertal olika produktionsutrustningsproblem med tillhörande kvalitetsproblem hos rörprodukterna. Projektet väljer därmed att fokusera på de produktionsutrustningsproblem som ger störst effekt för förreduceraren om de löstes.
Det är inte bara verkligheten som räknas : Hur uppfattas miljöer i 2D och 3D?
Being able to take a decision on an area you've never seen is a difficult task. It is also complicated to introduce an environment in the best way to benefit its purpose. This study focuses on the differences people notice between 2D and 3D models. To make it more concrete, the study has been linked to a case study called Ha?lsans va?g 255.
ALM - Tillgång/skuldmodell för riskberäkning och portföljoptimering
Asset management in insurance companies differs from conventional asset management to the extent that respect has to be taken to both assets and the commitments the insurance company has towards its customers. A model that has proven to fit well regarding the matching of assets and liabilities is the Asset Liability Management Model (ALM model). In addition to the matching in the balance sheet, the ALM model can be used in a company's work with strategic portfolio allocation by applying it as a basis for analyzing investment strategies with expected risk and return. From this, the ALM model also becomes relevant for calculating key figures according to the legal framework Solvens II which includes laws and regulations regarding the demands on economical strength (solvens) of insurance companies.Hence, the goal of this masters thesis has been to, on behalf of Bliwa Livförsäkring, create an ALM model to support the asset management department of Bliwa in their work with defining a credible way of analyzing the future risk and return of Bliwa's asset portfolio and insurance undertakings.The ALM model generally consist of four submodels, the scenario model, the liability model, the asset model and the company model, where the scenario model often is named as the core of the ALM model. The course of action has been to develop these submodels individually, with focus on the scenario model.
Hur simträning påverkar hundar
Hydrotherapy is a relatively new area when it comes to treatment and prevention of different problems in dogs, but an area that is growing in popularity. In Sweden, the person who performs hydrotherapy on dogs doesn?t need veterinary education, which is the case in some other countries. What makes hydrotherapy advantageous is that water has an ability to provide an environment where injured body parts can be supported, which means that rehabilitation can start early without the risk of affecting the injury and in the same time relieve the pain for the patient. There are only a few studies of hydrotherapy on dogs and these studies focus on the physical health of the dog.
Lateral epikondylalgia : evidens för stötvågsbehandling för smärtreducering och förbättrad handgreppsstyrka
SyfteSyftet med föreliggande studie var att försöka klargöra om stötvågsbehandling har någon effekt på smärta och handgreppstyrka hos patienter med lateral epikondylalgia.Frågeställningar1. Har stötvågsbehandling någon effekt på smärta hos patienter med lateral epikondylalgia, i så fall vilken?2. Har stötvågsbehandling någon effekt på handgreppsstyrka hos patienter med lateral epikondylalgia, i så fall vilken?MetodSökning av litteratur utfördes i PubMed, Cochrane, Cinahl och PEDro.
Metodik för fastställande av bärförmåga på befintliga betongkonstruktioner
Many buildings are now nearing the end of their service life. This applies to both the older houses from the 40's and 50's to the million project houses that did not prove to be as sustainable in the long run. Often there is a desire to extend the service lifetime, but to do that you need to make detailed inspections. The Folkets hus in Gävle is one of those buildings that is in need of renovation and to fulfill the new requirements that must be met in today's buildings. It is desired to make the buildings rentable space more attractive and to extend the building with two more floors.