This thesis studies settlement continuity on Gotland between approximately AD 200 and AD 1700. The method used is to calculate correlation between the geographical distribution of all known Iron Age stone-wall-houses (on Gotland known as "kämpagravar") and all farms included in the detailed taxation maps from approximately 1700. The number of remaining house foundations is between 1800 and 1900. A model to estimate the number of removed foundations is presented. It is based on the assumption that the settlement density was proportional to land use around 1700, and that the rate of removal is related to the current land use.

Lower energy use in buildings is a result of increasingly stringent energy requirements across Europe. When conventional district heating technology is used in areas with low energy consumption heatlosses do not fall even though the amount of energy delivered is reduced. This reduces income for thedistrict heating company. To maintain their economic viability the district heating companies? majorchallenge is to implement new solutions that minimize heat loss.

Insecticides will be removed from Swedish forestry, at present insecticides are used to treat our seedlings to avoid them from being attacked by pine weevils. With the forthcoming ban on insecticides alternative protective measures will have to be tested. Holmen Forest Ltd has aimed to find an alternative and have developed a mechanic pine weevils protection accessory as well as a new concept on planting pipes. Studies have been conducted on the behalf of Holmen Forest Ltd to see how planting with the newly developed mechanical protectors and plant pipe stands up against the conventional methods used today. The study was conducted over a three week period. Three factors were compared regarding planting quality including i) pressure around the plant, ii) the depth the plant ended up in, iii) plant angle. Mechanical plant pipes were used in the study, and where tested like a one-handed and a two-handed pipe. The study concludes that further development is needed for the mechanic plant protector to live up to the speed and quality of conventional methods.

In the last few years people have become more and more aware of how humanity is affecting the climate. In the direction of reducing the greenhouse gases is to design engines with higher tensile properties and reduced weight, in order to achieve lower fuel consumption and cleaner fuel incineration in today's truck engines.In order to achieve these requirements it?s necessary to increase the combustion pressure in the engine. This requires higher tensile properties and high thermal conductivity of the engine material. The department of Component Technology at the University of Jönköping in collaboration with Volvo Powertrain AB, Scania CV AB and DAROS Piston Rings AB has been commissioned to develop this material and to find knowledge of material properties used in truck engines and piston rings used for marine applications.The purpose with this work is to analyze the tensile properties of a series of cast iron, cast under different metallurgical conditions.Four different series of cast irons have been analyzed from four points of view, carbon concentration, nodularity, amount inoculation and cooling rate.After the tensile test all specimen data was analyzed in a mathematic calculation program called Matlab 2006a.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

This master thesis has been done in cooperation with Sweco Viak AB in Sundsvall. The aimwith the project is to investigate the purifying effect of percolation filter due to iron andmanganese. The overall goal was to investigate how the parameters surface load,sandfractions, and burden time affect the purifying effect. The expectation is to optimize thedesign and find a demouldning of the filter that gives sufficient purifying with a highersurface load. As an attempt to accelerate the curing of the filter, experiments with a layer ofsand which surface has been covered with manganese ore (MnO2) on top of the filter havebeen done.As test filters 10 L bars were used and the experimental work was performed at thewaterworks in Hassela and Munkbysjön.In Hassela different sandfractions were tested.

Animal art is one of the more mystical aspects of Scandinavian Iron Age culture. It has foremost been regarded in the light of art and style history. Interpretation has also ? mainly from the 1990s and onwards ? been made through iconographic analysis. But the problem here is that iconography requires textual analogy, something that the Scandinavian Iron Age lacks.The purpose of this paper is to lift some of the ?mystical fog? that engulfs the scandinavian animal art, by developing a method for interpretation of pre-historic images that evades the flaws in the iconographic method.

By using pollen analysis and 14C-dating, the history of vegetation and land use at the old shieling place (Sw: fäbodställe) Öjingsvallen in Ängersjö parish, central Sweden, was studied. The aim of the study was to answer the following questions: 1) When was Öjingsvallen established as a shieling place? 2) What was the land use at Öjingsvallen? 3) Was the use of Öjingsvallen as a shieling place affected by the agricultural crisis in the 14th and 15th centuries? 4) Is there any relation between the establishment and land use of Öjingsvallen as a shieling place and the historically known increase in the number of shieling sites known to have taken place in the 16th and 17th centuries? 5) Was the use of Öjingsvallen as a shieling place affected by the iron production in the area? According to the study, Öjingsvallen was probably established as a shieling place during the period A.D. 300-700. The main land use at this time was forest grazing.

This Master of Science thesis was a part of Pharmadule Emtungas project to construct a mobile automated cell for welding of carbon steel pipe (Heating, Ventilation and Sanitation). Pharmadule Emtunga is using a modular building concept for building pharmaceutical factories. The modules contain these pipes. The goal of the thesis was to present concepts for technical solutions regarding welding methods and fixtures for the cell. Conceptual models for the cell were made with aid of CAD software.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

This paper deals with prehistoric charred organic material, interpreted as bread, found in graves and in the underlying settlement at Kalvshälla, Järfälla parish in Uppland. The aim was to categorize the organic material morphologically and with the help of Fourier transformed Infrared spectroscopy (FT-IR) to see whether it was bread or not. Material from 13 graves (dated to Late Roman Iron Age until Viking Age) and 3 finds from the settlement have been analysed. Differences were noted both in shape, porosity and structure. Some of the material has been interpreted as cereal based foodstuff instead of bread due to morphological discrepancies.

In many developing countries, among them Vietnam, contamination of agricultural land is a major issue that has public health implications. A fast growing population, rapid urbanization and industrialization have led to air and water emissions of potentially toxic elements (PTEs), such as cadmium (Cd). Earlier studies have shown that individuals with low iron (Fe) and zinc (Zn) status absorb larger quantities of Cd than those of adequate nutritional status. The purpose of this study was to investigate and compare the Fe and Zn intake from the foods consumed by women (15-45 years) in selected households in two agricultural villag-es in the Red River delta in Vietnam. In one of the villages the residents were involved in metal (mainly Fe) recycling activity, whereas in the other village the residents had agricul-tural production as main source of income. Interviews, followed by food intake calcula-tions, were performed.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

This essay is a study regarding the existence of Bronze Ages and Iron Ages battlefields in Scandinavia and the possibility to trace and find them by using the Battlefield Archaeological Method.Based on a theoretical background and results from historical battlefield research and excavation experiences, the discussion deals with some of the problems and possibilities of applying the Battlefield Archaeological Method on older places. The existence of these battlegrounds is also an unknown factor, and a major part of this study is trying to find evidence of their existence. For that purpose I am using as an example a deeper analysis of an Iron Age battlefield archaeological excavation in Germany in order to compare and draw parallels with the Scandinavian society of that time. I am also using the evolution of weaponry, in particular the sword, to show parallels between the Mediterranean and the Scandinavian societies in the matter of warfare and tactics..