This essay deals with the results and observations made during excavations in an iron age cemetery in Alsike hage, located in Alsike parish. The excavations took place in 2005 and 2006 and the investigated area comprised two adjacent, but secluded burial-constructions; a square stone setting with a secondary grave, and a stone-built terrace with at least one secondary grave. The artifacts suggests that the TPQ of the stone setting, and the construction date of the rest of the graves, is 900-950 A.D. The aim of this study was to comprehend the course of events in the investigated area, and toanalyse the archaeological finds - in comparison to the well documented an discussed material burial culture in the lake Mälar area ? in order to discuss indicators of gender and social status.Metal artefacts has been preserved as a part of the analysis..

As to now, no study has been made of the mica tempered pottery found along side the asbestos tempered pottery in Norrland during the Bronze Age and Early Iron Age. Its occurrence has previously only briefly been noted in a few published works and the dating and geographical distribution of mica tempered pottery in the north of Sweden has to a large extent been unknown. This paper aims to compile the available information about this type of pottery and the locations where it has been discovered in order to date and explain the occurrence of mica tempered pottery in Norrland. It's also suggested that the occurrence of mica tempered pottery is connected to the spread of the early metalwork from the east to areas that today makes up the north of Norrland..

Mathematical models possible to simulate are of great importance in order to make successful projects in the aircraft manufacturing industry. An aircraft fuel system is very complex, containing pipes, tanks, orifices, valves and pumps. The principal of this thesis is using the tool Easy5, which no longer is considered reliable enough in terms of development and support. This thesis tries to evaluate the Modelica language as a possible alternative to Easy5. To make this evaluation, the components concerned in the fuel library in Easy5 are implemented to the Modelica language.

This essay deals with the ideas of social change in the Iron Gates Gorge site of Lepenski Vir during the Mesolithic. The change from a mainly fish-based subsistence strategy to a strategy that came to rely more on hunting and later domesticated animals could have been the onset of the social change that is noticeable in the material culture from the site. Theessay is divided in two main segments. The first consists of a case-study based on three themes that describes and searches for changes in the subsistence-, settlement- and burialpractises during the Mesolithic and beginning of the Neolithic phases, and the second part analyses the results from the case-study. It is primarily the idea of transformations and reproductions of traditions that will be dealt with in the analysis which is facilitated by a theoretic structure based on and inspired by the works of Emilé Durkheim and Anthony Giddens..

Stormwater in urban areas has been treated as a problem for a long time. The large proportion of impermeable surfaces inhibits the water from infiltrating in the ground to the same extent that it does in nature. This causes intensive surface flow during rain, which in turn causes inconveniences such as decreased accessability, floods and increased risk of desease spreading. Drainage through pipes is the traditional and usually functional metod for storm water disposal. That is as long as water flows are moderate. But precipitation varies naturally in amount and intensity and additional impermeable surfaces make some pipes insufficient for heavy or lasting precipitation.

This paper deals with flat iron fragments from the Viking Age hall situated in Birkas Garrison, Adelsö parish in Uppland. The aim of the study was to identify which objects these flat fragments were originally derived from. The aim was also to discuss the function of these objects and their presence in the hall. This would hopefully increase the knowledge about the hall and the warriors who lived and worked there. In some cases the fragments form and placement in the hall has not provided enough information to classify the object from which they derived.

This thesis describes a method of measuring axial magnetic leakage flux in an operational hydropower generator. Axial magnetic leakage flux is the magnetic flux at the ends of a rotating generator, which goes through the stator parallel to the rotor axis. This flux can cause circulating currents in the stator iron, giving rise to losses, and can in the worst case overheat a generator, causing it to melt down. To measure the axial flux, and how it affects the generator temperature, a measurement system was constructed on behalf of Vattenfall. The system consists of search coil sensors and a signal-processing unit with amplifiers and active filtering.  To confirm the behaviour of the axial leakage flux and the functionality of the measurement system, a test installation was made.

In this paper I have tried to find out the reason the medieval town of Vä was created. I have studied several different areas in witch all, in one way or another, have had an effect on the making of Vä. This areas includes topography, iron production, mill handling, religious effects, royal affliction and also if the name Vä could tell something about Väs history as a religious cult. I have also looked at two other places not far from Vä, the medieval harbour town Åhus and the big village of Fjälkinge. By comparing these three places I tried to find out what Vä had that the other places did not, which made Vä turn in to a town.

This essay consider ritual death during the ironage, and through a presentation of historical and archaeological sources. Considered ritual death I think we should study both historical and archaeological sources, to get a vider view and a new perspective. To make the essay easier to understand I have split up the early and the late Iron Age in the discussion. In order to study the ritual death I have shown archaeological examples like bogsacrifices in the early ironage, and decapitated victims in the Viking society. The victims have been considered as slaves by some archaeologist.

The Christianisation of Sweden is not much about religion. Instead, there is much to be gained by looking at it as a colonial situation with changing social identities and power structures. This is evident by the prevalence of hybridisations in the archaeological material.Some of the material categories that show the clearest example of changes are the burials from the 9th century up until about AD 1200. This is exemplified by two different Iron Age burial sites in Stockholm county, Uppland, Sweden: RAÄ 59, Valsta, in Norrsunda parish and RAÄ 40, Lilla Ullevi, in Bro parish; They both show hybridisation by involving older elements with newer ones during a time period when the church was not quite established in the region yet.The Christianisation of Sweden is a colonial situation, but the research tradition has often also used a colonial lens from the 19th and early 20th century in its approach to the period. This means that the same questions, interpretations and conclusions, often based on written sources, have been continuously reused for a long time, which has had consequences for the archaeology in Sweden..

The main purpose of this study is to view the aims of the local authority of Botkyrka for their prehistoric village, and to compare those with the actual activities in the village.Because of no official formulated aims, the study were laboured through interviews, observations, analysis of evaluations and a parallell literature study.For the visiting pupils today, the village has an introduction, but not a follow-up. Pedagogically the follow-up is the most important part, seeing that it?s there the knowledge is created in relation to the experience.Through experience-pedagogy, based on learning by doing, try to attain an experience intended to generate knowledge. But in this case, the focus lands on doing, and the reflection fails to occur. This is a learning based on the situation, rather than on the reflection, situated learning..

Norconsult AB has developed a solarhousing concept, a house designed for the warm climate in the Middle East andwith large quantities of solar panels installed. The cooling system for the house was designed in an earlier report, the purpose of this thesis is to investigate the possibility of short and long term storage of thermal energy via an underground energy storage volume.Two different designs of the storage and three different filling materials have been integrated into a model to simulate different cases. The first design consisted of pipes installed in the ground, without insulation. The second design consisted of an insulated concrete box installed to prevent thermal energy from the surrounding soil to flow towards the lower temperature regions within the storage. The three different filling materials were dry saudi sand, water saturated saudi sand and the filling material used by the client for energy storage in Sweden.The results from the simulations show that neither of the designs, regardless of the filling material, managed to extract enough thermal energy from the house to the ground to uphold the demands of indoor climate.

På Trafikverkets centrala funktion IT används Team Foundation Server 2010 för projekthantering. Utifrån detta system det är det möjligt att få fram mätetal som visar information om olika projekt. I denna fallstudie undersöks, med hjälp av intervjuer, vilka av dessa mätetal som kan användas för att visa en relevant bild av kvaliteten på ett systemutvecklingsprojekt. En modell presenteras för hur olika mätetal skulle kunna vägas samman för att fungera som en siffra på ett projekts kvalitet/hälsa. Till sist utvärderas om mätetal från TFS är tillräckliga för att ge en bra bild av kvaliteten på ett systemutvecklings-projekt.

Skillingaryds stålrörsindustri AB handles different kinds of steel pipes and got theirmarket mainly in the furniture industry and in department stores. At the momentthe company find themselves in a strong up going course. In a few years thecompany?s turnover has increased with over 10 million SEK. This has led to ademand for structure changes and reorganizing through the company.

This report presents an independent thesis corresponding 15hp and was carried out on Högskolan in Halmstad during the spring of 2014. The thesis is the final course which ends a three-year mechanical engineering program with focus on technical design.The thesis started in an operation which electricians are exposed to every day. The operation in question is cable laying or wiring. The tool they use is called a tension spring and is a long and stiff wire, usually made out of nylon or fiberglass. The tension spring is fed through pipes in the walls and brings the desired cables with it on the way back.