Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

The southern part of Sweden, Skåne, is frequently exposed to storms causing great damage to Norway spruce (Picea abies L. Karst.) stands. A storm during the winter 1999/2000 raised the attention of the problem. A lot of forest owners got large areas of spruce stands wind thrown during this storm. Can naturally regenerated birch (Betula sp.) be an alternative on these wind-exposed sites? This was the main question I was facing when discussilig the problems with Esben Möller Madsen, Söderåsens forest district. The aim of this master thesis was to present an economic analysis of Norway spruce versus birch.

In the future the Swedish pension system will face major problems. With an increasing aging population combined with a decreasing share of working population the financing of the pension system is becoming a bigger problem than previously predicted. This means the individual himself will have a bigger responsibility to invest money for their future retirement. It has been shown that a large proportion of the people who invests for their future pension have neither the interest nor the time to actively invest their pension capital. To make it easier for those who invest for their retirement, some Swedish banks have created so-called generation funds.

Outages in the electric grid can be costly for society. Because of this, reliability is one of the parameters used to regulate network companies. Reliability in electrical grids can be measured with SAIDI, system average interruption duration index, which for Fortum Distribution has increased in Stockholm?s distribution network (11 kV) in the early 2000?s.By using outage data for Stockholm from 2011-2013, sets of parameters to be used for reliability calculations in the network information program Tekla NIS were derived. Two different options for investment were then analysed: changing old cables with high fault frequencies, and installing automatic switching in distribution substations.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

The scope of this project is to make a comparison of costs associated with wind and nuclear power in order to decide which one of these is the most suitable in the case of an increased demand for electricity. It is also investigated if there are other factors that can influence the choice of energy source.An average cost is calculated in terms of kronor per kilowatt-hour (SEK/kWh) using cost of investment, operation & maintenance and taxes & subsidies. Total investment cost is recalculated to production cost using the annuity method at three different interest rates (6%, 9% and 12%).The comparison is made between three cases of wind power and two cases of nuclear power. For wind power there are two ocean-based (300MW and 100MW installed capacity, respectively) and one land-based (60MW) wind farm. For nuclear power there is one EPR-reactor (1600MW) and one AP1000-reactor (1100MW).

AbstractBachelors thesis, Bygg och fastighetsekonomprogrammet vid Högskolan i Halmstad Vårterminen 2009Authors: Emma Stenberg och Emma SvenssonTutor: Sven-Ola CarlssonTitle: Ägarlägenheter - en framtida investering Background and problemThe concept of owner?s apartment has been discussed in Sweden since the 19th century. It was not until the first of may 2009 that it got legislated to be allowed in Sweden. The concept that people should be allowed to own their apartments instead of owning a part of the tenant-owner?s association is a new phenomenon in Sweden.

The energy that the earth receives from the sun hourly has potential to cover a year?s energy demand in the world. Further, this type of energy is environmentally friendly, natural and free of cost. This report covers solar energy in an urban environment and consists of a case study of installations of photovoltaic cells in a part of the city of Stockholm. It is mainly the economic aspects that are covered but there is also a discussion about the practical consequences and the sustainability as a result of integration of solar energy in an urban environment. The aim of the study is to present results from economic calculations for utilization of solar energy in chosen buildings in Kungsholmen in Stockholm.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

Abstract Master Thesis in Business Administration, School of Business and Economics at the Linnaeus University, 2013 Authors: William Funseth and Tobias Åkesson Supervisor: Magnus Willesson Examiner: Sven-Olof Yrjö Collin Title: The liquidity route to more informed investment decisions - A study on the relationship between concentration of ownership and liquidity on Nasdaq OMX. Background and problem: Previous studies have shown that liquidity can explain differences in returns in corporate shares, the company's cost of capital and the valuation of the company. Based on the effects of liquidity we developed a research question concerning how concentration of ownership effects liquidity of corporate shares the studies conducted for companies listed on Nasdaq OMX during a period with major changes on the stock market and is also investigating weather other company-specific differences can explain differences in liquidity. Purpose: The study's purpose is to study the relationship between ownership concentration and liquidity, and whether other factors might explain differences in liquidity. Method: The study is conducted with a quantitative method and it?s based on data collected from 2006-2011 for companies listed on Nasdaq OMX.

The purpose of this essay is to describe how Boverkets Byggregler has affected the cost ofnewly built houses from 2003 to 2012, to Boverkets Vision 2025. The purpose is also to findagent-principal relations in the construction sector.When investing in an energy efficient house the operating costs are reduced compared to aconventional house. But due to the lower operating costs, the investment cost rises. In thisstudy, we find out if it is economically viable to invest in an energy efficient house comparedto a conventional house from the customer's perspective.The study's approach has been qualitatively where we in collaboration with Derome Hus hadaccess to three conventional reference houses and a passive house and data that was necessaryto conduct viability assessments on houses. We conducted five interviews with people fromDeromekoncernen and Varbergs kommun.The calculation methods we have used in this study are present value method, annuity methodand a sensitivity analysis.

As more and more people gain access to broadband in their properties, the security threats get bigger. A lot more people also have computers that they carry home from work where they store important information concerning the company. The information stored on theese computers can be very easy to retrieve if you have the will and the skill to do it. Very few people have any knowledge how to protect themselves from theese threats..

Large-scale land investments is not a new phenomenon, but increasing prices on food and agrofuels have inflated prices on land and has led to an enhanced interest in landinvestments from a range of different actors. The ProSavana project in the Nacala corridor in the Nampula province, northern Mozambique is a large-scale land investment with the purpose of establishing intensive commercial agriculture and is planned to be implemented this year (2013). The project is financed by Brazil and Japan in collaboration with the government of Mozambique. It is not quite clear how large-scale land investments affect the areas they are implemented in and how they can affect the possibilities for sustainable development in these areas. Both opportunities and problems can be observed within the social, economic and ecological dimensions of sustainable development.

Agricultural drainage ditches are links between fields, lakes and oceans, having the potential to transport e.g. sediment and nutrients. When in a good condition, drainage ditches can act as sinks for e.g. phosphorus and sediments and prevent eutrophication downstream. The aim of this study was to determine the condition of one agricultural drainage ditch and to come up with suggestions for appropriate measures. The aim was also to determine which of the ditch?s properties that were possible to evaluate visually, which processes they represented as well as which properties required complementary physical analysis. This in order to contribute to the work of developing a method for determining the status/condition of agricultural drainage ditches.