SMC Pneumatics is a world leading company in pneumatics. In Sweden, they have about one third of the pneumatic market. The company has noticed that their air preparation series not always have the appearance that the costumers are looking for. Their competitors have on their similar products put more effort in making them more attractive. To solve this problem it has in this project been developed a concept for aForm Shell.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

ABSTRACT System development has become more and more concentrated on development for the Web and this has resulted in larger target groups. It will most surely continue to be so considering that the Web will be the infrastructure of business and services in the future. A big target group involves that the owner of a system can earn a lot of money from the paying users, but that assumes that the system can meet user needs. If a system on the Web does not satisfy the user?s demands then they will use the competitor?s system instead because it is only a mouse-click away.

This Master degree project has been performed at the Braviken paper mill on papermachine 53 (PM53) which produces newsprint paper. The current economic situationhas contributed to declining demand for newsprint, which means it is extra important tobe competitive by high energy efficiency. Particularly as energy prices are expected torise when the economic growth returns.One way to increase energy efficiency is by reducing the water use in paper and pulpmills and consequently save energy through reduced heating of water. The thesis's maintask is to evaluate whether a water purification plant (microflotation plant) forpurification of process water in PM 53 is profitable. The microflotation plant enablesreuse of warm process water instead of losing the energy to receiving waters.

The aim of this studie is to describe, analyse and understand the benefits and disadvantages with using digital tools in education. In my qualitative method three primary school teachers were interviewed about how digital tools should be used in educational purposes, also what benefits/disadvantages they could see with the investment of digital tools in their school. I also did observations in two classrooms and interviewed a school politican to get a wider perspective. The collected information identifies that some benefits of using digital tools is the contribution to a more equivalent education, more opportunites for cooperations and that fewer pupils have to struggle with their fine motor skills when producing a text. Some of the disadvantages with using the tools is that they breaks sometimes, it´s easy to get dependent and if something happens (like power outage) it´s unusual that schools have a good an action plan.

This thesis project has been written and accomplished in cooperation with HABO AB. The objective of the project was to develop a standard stated packaging system. The background to this is that HABO is not pleased with the system currently in use. The system which HABO is currently using consists of to many sizes. The largest benefit of a standard stated system is that it becomes much easier to organize the packaging with the aid of a computer program.

Syftet med detta examensarbete är att göra en jämförande studie mellan faktorerna som enligt en teoretisk ram påverkar en miljöinvestering och faktorerna som ingår i ett företags bedömnings-modell. Respondentbolaget begärde i ett tidigt skede att få vara anonymt och benämns därför som Företaget. Det är en multinationell koncern med verksamhet i många skilda branscher, men med fokus på norden och produkter som kan kopplas till lantbruk. Den teoretiska referensramen har sin utgångspunkt i begreppen värde och investering samt hur deras koppling till miljö och miljöinvesteringar för att identifiera de faktorer som påverkar en miljöinvestering. Faktorerna som ingår i den teoretiska referensramen och som jämförs mot respondentbolagets faktorer är:? Investeringens värdetillförsel? Investeringens miljöpåverkan? Hur investeringen påverkar produktionsförutsättningarna? Krav från samhället? KundkravKopplingen däremellan bedöms enligt en femgradig skala.

This project concentrates on musicians who work in a professional music studio.The task of this project was to design a new headphone system called Foldback system.The advantage of this system is that all involved in a music project could influence their ownlistening during the project. With a couple of adjustments should each and everyone get theirown individual listening from their headphone station.This report shows different methods, theories and results that came along in development ofFoldback system. The project has resulted in a finished product that will be in use atStudiomega..

The buying decision process describes how the consumer makes a purchase decision through a rational process (Markin, 1979) and an understanding for how consumers make a purchase decision can according to Sands et al. (2010) be obtained by increased knowledge for the information search process (the second part of the buying decision process) before a purchase. Today?s society offers great opportunity to obtain information (Rahim & Clemens, 2012; Bawden & Robinson, 2009) and by that there are in other words good opportunities for a rational acting by the consumers. However, there are factors working against that consumers act rationally and seek information prior to their purchases primarily in the form of the concept of information overload (Bawden & Robinson, 2009) which claims that consumers are limited in their information search because there is too much information but also other factors such as lack of time (Wood & Neal, 2009) and ability to find information (Slegers et al.

Material handling is a term that includes all kinds of handling of material from a raw product to a finished one. ABB is active in the following segments; foundry, packaging and palletizing, metal industry and plastics industry.The demands for efficiency and reliability have been set very high in the industrial sector. Optimizing of the material handling will give the company higher cost-effectiveness. Around the robot there are different kinds of material flows, to optimize the cycle time, consisting of carriages combined in different ways.Motion Control is a complex system with main functions such as; positioning, synchronizing, indexing and more. The products in the system need to cooperate to make these functions possible therefore integration of motor- and servo products are important.

This thesis aims at determining the heat losses in a property vent stack and its roof valve. Upon request of a company, the vent stack is analysed for possible heat recovering solutions to be implemented, while relining of the drain system is executed and with a suitable payback time for the economic investments. The heat loss calculations are based on data for properties that are located in the Stockholm region, but also easy to change depending on the situation. The calculations are done on pipes made out of cast iron, which still is the most common type of drain pipe in Sweden, and these are the pipes that relining is usually made on. The calculations that needed to take several variables into account have been done in MatlabR2014a and the thermos dynamical properties that were used in those calculations have been extracted from EES.Three different types of heat losses in the vent stack have been taken into consideration in this thesis.

Denna uppsats syfte är att undersöka och förklara hur brand extension produkter kan påverka ett företags image. Vi har valt att undersöka Jaguars, Porsches och Ferraris brand extension produkter då dessa avviker mycket från deras core product. Uppsatsen besvarar även hur konsumenterna uppfattar dessa brand extension produkter och företagens bakomliggande motiv till dem. Vi har under uppsatsskrivandet gång pendlat mellan teori och empiri. Vår empiri består av kvalitativa undersökningar.

This report describes the results of the project "Concept development of jet engine inspection plugs" carried out in the spring of 2008. The work was done at the department of product definition at the company Volvo Aero in Trollhättan. The objective of the work was to develop concepts for a "Volvo-unique" inspection plug. The work is part of Volvo Aero's focus on proprietary (self-developed) technologies. Inspection plugs can be found on virtually all aircraft engines and gas turbines.

This thesis aims to study brand change, which can be of interest since a brand during its lifetime can be expected to meet a lifecycle consisting of five phases; innovation, introduction, growth, maturity and recession. In order to avoid the recession phase and the sales decline that follows there is a need for a change of the brand.In order to study brand change, theoretical framework is compared to two real world cases that have gone through an active change.The conceptions of positioning, repositioning and revitalization are clarified. Positioning deals with how brands are located in customer?s minds as well as on the real market. Repositioning implies a change of the current position and is also often a move towards a new market segment.