This is a feasibility study that examines various aspects of building a wind farm on Malmön in Norrköping. The feasibility study deals with interests of conflict, park design, electrical connections, production calculation, financial calculations and operating- and timetable.The report is divided into two distinct parts. First a theoretical part, which deals with conflicting interests, park design and electrical connections. Second a part with simulations dealing with production calculations, and financial calculations.Opposing interests are mapped so that problem areas can be found, and help put focus on the right places at a future environmental impact assessment (EIA). There are a number of areas where planners have to assess on an EIA, this thesis point on the most important areas.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

När en kommersiell hamn byggs ut fordras omfattande muddringsarbete för att säkerställa ett brukligt djup för sjöfart. Då stora delar av muddermassorna ofta är förorenade av tungmetaller och miljögifter krävs särskilt omhändertagande av dessa. Traditionella omhändertagningsalternativ består av att deponera massorna på särskild avsedd plats på land eller tippa till havs, något som inte tillåts för förorenade sediment. En relativt ny metod är stabilisering/solidifiering (S/S) som innebär att muddermassorna behandlas med ett bindemedel för att sedan kunna användas som fyllnadsmaterial i exempelvis kajkonstruktioner. Dessa alternativ behöver noga vägas mot varandra med hänsyn till ekonomiska och miljömässiga aspekter.

The idea for this project was initiated together with one of the leaders in the forest, paper and packaging industry. To get through an A/R CDM process the company is exposed to the risk of failing the process or that the overall costs will exceed the benefits of the project. This would delete the incentives to invest in GHG removals compared to purchasing emission allowances on the carbon market. The questions that have been raised and needs clarification in the thesis are the following:? From a company perspective, what are the incentives for implementing Forest Clean Development Mechanism (CDM) projects?? What is a likely financial outcome of a reforestation CDM project on degraded land in the Guangxi province of the Peoples Republic of China?? When does an investment like this break even with the cost of buying market based carbon emission allowances? The objective of this master thesis is to carry out a research about the incentives for forest, paper and packaging companies to invest in reforestation through the clean development mechanism.

During consultation procedures between forest owners and the Sámi, data on, e.g., reindeer lichen biomass on the current site is needed. Hitherto, the existing methods of measuring lichen cover and biomass has been either objective methods such as the Point Intercept method, which is time consuming, or some sort of subjective visual estimation, which is faster but less accurate. However, both these methods are sensitive to different observers and/or to different inventories. This paper addresses the further development and evaluation of a photographical inventory method that uses colour distribution in images to estimate lichen biomass. During the autumn of 2011 six different locations, with different grazing pressure and lichen cover, in Norrbotten county were inventoried using both the Point Intercept method and the photographical method, complemented with collection of biomass samples.

BackgroundA cost that lately has been discussed related to audit is the higher cost for auditing of small stock company. The question is if this cost is higher than the total utility of statutory audit and should it in that case be statutory. SRF says that the condition for small stock companies development is an abolishment of statutory audit. FAR consider that auditing is important for development and continuation.PurposeThe purpose of this paper is to investigate whether there are any winners or losers among auditing firms and accounting firms in Sweden if the statutory audit for small stock companies abolish.MethodThe paper is both a qualitative and a quantitative study that is based on primary data made from an interview and a questionnaire investigation. ConclusionOur conclusion is that the big Winner is the accounting trade.

Background: Investors have several options to choose from when the goal is to achieve the highest yield at the lowest cost and risk. Stocks are a common investment options, but is also associated with risks. Portfolios are usually constructed with several different assets to reduce the unsystematic risk of investment. Funds are similar to composite stock portfolios, the big difference is that they dealt with in their entirety and investors may not affect the fund's content. The problem remains that whether you choose stocks or mutual funds there is still uncertainty as to how the future will unfold.

The purpose of the study is to investigate and elucidate how low-cost airlines can influence and develop tourism in a region. In order to bring about the purpose the author used two research questions. Have low-cost airlines contributed to regional development? How many additional visitors have low-cost airlines contributed to Stockholm? In order to answer these questions a survey was carried out at Arlanda airport and statistics were collected. The results of the study show that there has been a regional development.

The technology used in the development of web-applications is evolving at such rate that it has become more and more important to keep web-applications modern. If an application is based on a technical platform that is not renewed, the platform may over time develop into an obstacle in further development of the application. There may be compatibility issues and some of the code may be unnecessary due to abstraction, and therefore more time consuming to work with. Sometimes the reason may be that an application has been built to run, and is running on an application server that is no longer being maintained. The system can be large and modernization can cost a lot.

The usage possibilities of mobile platforms and smart phones are increasing rapidly as they provide support for better processors, sensors and communications capabilities. This has for many companies resulted in an increased interest to explore the possibilities of mobile platforms and how they can be integrated in various business areas. As the usage of mobile platforms in industrial applications is a new area, it is difficult for companies to estimate their potential, and what contributions the different platforms can give.This master thesis investigates the possibilities and limitations for the consultant firm Combitech when integrating mobile platforms and handheld devices in industrial applications. This is accomplished through a comparison between the platforms and by considering the possible areas of use for the mobile platforms based on experiences from companies and research in the area.For a company with the intent to deliver services that use mobile platforms, it is important to be able to combine expertise and resources to effectively attract customers. The mobile platforms will, if applied right, give great possibilities in industrial applications as a cost-effective alternative for both hardware and software solutions for businesses, which provides an opportunity to sell services to both established and new clients.

The usage possibilities of mobile platforms and smart phones are increasing rapidly as they provide support for better processors, sensors and communications capabilities. This has for many companies resulted in an increased interest to explore the possibilities of mobile platforms and how they can be integrated in various business areas. As the usage of mobile platforms in industrial applications is a new area, it is difficult for companies to estimate their potential, and what contributions the different platforms can give.This master thesis investigates the possibilities and limitations for the consultant firm Combitech when integrating mobile platforms and handheld devices in industrial applications. This is accomplished through a comparison between the platforms and by considering the possible areas of use for the mobile platforms based on experiences from companies and research in the area.For a company with the intent to deliver services that use mobile platforms, it is important to be able to combine expertise and resources to effectively attract customers. The mobile platforms will, if applied right, give great possibilities in industrial applications as a cost-effective alternative for both hardware and software solutions for businesses, which provides an opportunity to sell services to both established and new clients.

This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

 Today a major part of the energy produced steams from fossil fuels, finite resources, and a change towards an energy sector based on renewable energy is necessary. Sweden is one of the leading countries with regards to investments in renewable energy but most other countries have a long way to go. This makes it interesting in developing renewable energy projects in new markets in countries like Poland where still a lot of fossil fuel is used. Large infrastructure development projects are very costly and therefore external investors needs to be involved. The investors play an important role in changing the usage of fossil fuels towards renewable energy sources.

Background: Investors have several options to choose from when the goal is to achieve the highest yield at the lowest cost and risk. Stocks are a common investment options, but is also associated with risks. Portfolios are usually constructed with several different assets to reduce the unsystematic risk of investment. Funds are similar to composite stock portfolios, the big difference is that they dealt with in their entirety and investors may not affect the fund's content. The problem remains that whether you choose stocks or mutual funds there is still uncertainty as to how the future will unfold.

The Swedish automotive industry has since way back been struggling with bankruptcy, abroad buy outs and staff cuts. Competition and pressure on prices are two factors that affect the automotive industry. Because of this, the companies are pressured to continuously developing their work in addition to be able to compete on the market. The aircraft industry has successfully managed to implement additive manufacturing (AM) and for motorsport has several components manufactured with AM been used. When AM is used as a manufacturing method, there are a number of advantagesthat follows.