This report is the result of a thesis carried out at the Department of Innovation, Design and Technology (IDT), at Mälardalen University on behalf of ABB AB Machines.The year was 1988 when ASEA and Brown Boveri formed a joint venture under the name ABB (Asea Brown Boveri).We perform our thesis at the division Discrete Automation and Motion where they primarily develops, manufactures and sells synchronous and asynchronous AC motors and generators.The main purpose of this thesis was initially to write a general packaging instruction, but the priority changed to develop more specific packaging instructions for Rotors, Stator gables, Bearing support and Outer Cover (plates) instead.The work started off to deal with a problem about that the staff had to start its work to grind away rust on the stator gables due to those stored outdoors. The result was mainly an investment in a new gable rack so that the material can be stored inside, as well as a packing instruction as it was originally intended.The problem on the bearing supports were that the staff thought it was demanding and difficult to clean them from the rustproofing they were greased in. If it is not possible to remove all rust protection it can cause the paint to not attach properly. After having compared with similar articles a test were done to order a pair of bearing supports without corrosion inhibitor, which gave good results. This initiative also set in motion a process to do the same for more different items.For special pallet, a survey were made of the process with two different VSM and a calculation of how much ABB would earn at ordering more special pallets than getting the material delivered on the A-pallets.

Humanity stands before a huge challenge to lower its emissions of carbon dioxide and its use of energy at the same time as the global population is rising and the developing countries are being industrialized. A lot of newly built buildings are due to this challenge, designed to be more energy efficient but also use renewable energy resources instead of pollutant fossil fuels .Solar energy is one of the purest forms of energy that exists in abundant amounts, which is why it is most likely that it could come to play a major part in the future energy market. The main purpose of this report is to investigate the possibility to implement a sustainable energy system with solar thermal heat and  heat storage as main sources of energy in the neighborhood ?kvarteret Lagern?, which is the area where the old football stadium ?Rasunda Stadion? was located. New developments within different heat storage techniques have opened up new approaches to enable buildings an all year round heat supply from solar energy. This report will focus on heat storage in boreholes. At the present here is only a preliminary plan of how the neighborhood is supposed to be designed.

Den svenska sågverksindustrin upplever en hård konkurrens på världsmarknaden för sågade trävaror. Efterfrågan har minskat utan att marknadens utbud har justerats ned. Detta har genererat lägre världsmarknadspriser och en utslagning av sågverksaktörer. Vägen till överlevnad och lönsamhet är inte entydig, men med en förbättrad och väl avvägd produktionskapacitet ökar chansen att vidmakthålla konkurrenskraften. AB Karl Hedins sågverk i Krylbo har som målsättning att årligen öka produktiviteten med två procent. Ett sätt att uppnå denna målsättning är att investera i utrustning som förbättrar produktionsprocessen.

Syfte: Uppsatsen syftar till att förklara hur byggherreföretag investerar i konstnärlig gestaltning. Genom analysen besvaras undersökningsfrågorna som handlar om vilka investeringar och strategier som tillämpas av byggherrarna för konstnärlig gestaltning, samt vilka faktorer som påverkar deras beslut att arbeta med konst och kultur.Teoretiskt perspektiv: Studien görs ur ett företagsperspektiv med hjälp av teorier om hur olika värden kan genereras utifrån kulturen tillsammans med teorier om strategier, investering och beslutsfattande.  Metod: Vi har gjort en kvalitativ studie med en abduktiv ansats. Undersökningen är gjord som en explorativ fallstudie. I en kommun har vi valt tre verksamma byggföretag med pågående byggprojekt.

This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

Syftet med uppsatsen är att analysera hur de specifika variablerna samverkar i investeringsanalysen bakom strategiska investeringar vid beslutsfattandet. Studien är inriktad mot den dominerande företagssektorn små och medelstora företag, vidare görs en jämförelse mellan yngre och mognare företag. För att analysera detta har en kvantitativ datainsamlingsmetod använts i form av en enkätundersökning. Forskningsfilosofin som är applicerad är deduktiv, för att på så sätt kunna dra generaliseringar i slutsatserna utifrån den empiriska analysen och fullfölja studiens syfte. Studien är baserad utifrån beslutsteori där hantering av risk och osäkerhet har en central roll.

An increasing number of automotive supplier companies are investing in Central and Eastern Europe (CEE) in order to gain cost advantages. This has happened in a rapid pace since many of these countries did not have any foreign direct investments (FDI) at the turn of the century. The problem now is for how long these countries will be able to maintain the low costs. One purpose was to create a model of country advantages for automotive supplier companies when relocating further production to CEE. This dissertation was written in cooperation with the Trelleborg Group.

Competence Portals are software tools that are intended to make it easier for persons that have had no previous contact to find and contact each other. The portals can address areas ranging from finding an expert within an organisation to the marketing of the competence of a region or a research centre to other organisations. The purpose of the thesis is to examine the necessity of Competence Portals in research-intensive organisations. Important characteristics of the information in such portals have been identified and used as a basis for recommendations regarding how Competence Portals could be designed. Furthermore, the thesis focuses on the task of finding a source of knowledge within an organisation.

Purpose: This study deals with warehouse management with an emphasis on vertical lift modules (VLM). The aim is to examine the effect of the implementation of VLM on a business's warehouse management. In order to obtain a result, the study has been based on the following questions:? How was the warehouse management designed before the implementation of VLM?? How is warehouse management designed after the implementation of VLM?Method: To be able to answer these questions, interviews with ten users of VLM performed. All users usually lift systems from the same manufacturer.

In order to drive innovation and growth in a nation is it important to have innovative companies. Many of those innovative companies are smaller companies, which are in need of capital injections for expansion of its operations or to be able to produce a commercial product. In many cases the banks will not lend because they believe there is too great a risk that they will not get their money back. It is in this situation venture capital becomes interesting. Venture capitalists? see the potential the product and/or entrepreneur possesses and are therefore more willing to take the risk in investing in these companies.

The increase in farmland value in Swedens plain areas is a well known fact in today's Swedish agricultural. In connection with the fluctuating prices of crops and inputs, are increasing the risk exposure to agriculture. The increased value of agricultural land has in Sweden over the years been due to a high demand for land that has existed and exists in Sweden. The increasing demand is linked to a structural rationalization of Swedish agriculture, leading to fewer and larger farm units (www, privataaffärer, Carl Johan Jurss).The purpose of this study is to examine the potential risks associated with the farmland value falls or remains unchanged, according to a farm credit administrator's perspective. The idea is to get a picture of the main factors taken into account when lending and the problems with falling or stable land prices into account when lending.

This study is an initial attempt to investigate the relationship between banks and developers in Stockholm and its regions. It gives a good impression about the field of construction and project developments in terms of the finance and the negotiations associated with these types of projects. Main actors of the Stockholm?s construction financing market were of major interest for this study. On this regard, the relationships and ramifications of this group were investigated by using a qualitative and quantitative research method.

Huvudmålet med detta examensarbete var att undersöka om det för Södra timber är ekonomiskt hållbart att tillverka engångspallar till pelletsproduktionens tilltänkta säckningsanläggning i Långasjö, gentemot att köpa in engångspallar från en extern leverantör. Detta gäller då för 30 000 engångspallar om året.Intervjuer togs på Södra timber i Långasjö om vilket virke som var lämpligt från företagets sida att bli av med. Detta visade sig vara brädor av 19x75 mm och 75x75 mm. Dessutom beslutades i ett tidigt skede att en engångspall med måtten 1200x800 mm är en bra lösning då detta är europastandardens mått. Olika alternativ togs fram för hur man skulle kunna ta fram materialet och sänka produktionskostnaderna och avsåg då brädor 19x75 och klossvirke 75x75.

The current debate about environment and climate change has contributed to more andmore investment in alternative energy sources such as wind, solar and biogas. The Swedish Parliament has set the target that wind power should supply 10 TWh in 2015.In Sweden, wind power establishment began in the early 1980s. Since then the development has gained a tremendous momentum. The purpose of this study was to find out what problems wind power brings and what power relations that exists in connection with wind power establishment and how the landscape is affected by windpower construction, focusing on some cases in Falkenberg and Varberg. This study shows that wind power establishment is a very complicated process.

Recent developments suggest that private and public companies are moving towards a more service-oriented business. Service orientation means that hardware is often sold in packages with service agreements, which makes the investment more difficult to assess. The challenges that arise will be to assess the value of the overall package, the information needed to make informed decisions and the operational requirements in combination of hardware, software, support agreements, training and more. The paper therefore aims to examine how decision makers can evaluate the benefits of these investments and obtain a stronger base to make better decisions. There is within the area of radiology in the region of Västra Götaland a pronounced need for a better flow of information regarding medical equipment and related service agreements.