The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

Computer based information systems play an important role in modern military combat vehicles. The crew needs to be able to quickly get information about both the vehicle and its outer surroundings in order to quickly make the correct decisions. In this report, we describe the development of a prototype new information system for the BvS10 vehicle, manufactured by BAE System Hägglunds AB in Örnsköldsvik.An important aspect of the system is the time it takes from the point that the information is generated by the vehicle sensors until it is presented to the user. The system must be able to ensure that it never displays information that is out of date. Thus, it is important to create a layer and component based architecture for the solution, making it possible to control, in detail, the information?s age as it moves through the system.

The purpose of this study is to investigate how activities in elderly care matters to well-being among elderly people, from both user perspective and staff perspective. The study is made out of a qualitative method, this to create a deep-going understanding of how the people participating in the investigation are experiencing the impact of activities on well-being from their unique situation. Personal interviews have been used as method. Six persons were participating, three elderly persons and three persons working as staff. All interviews were made in a ?short-time? ward in the county of Västernorrland.The result of the investigation shows that the elderly people that were interviewed not directly related the participation in activities to feelings of well-being.

Den här studien utgår ifrån en dokumentanalys med syftet att undersöka på vilket sätt socialpedagogik tar sig uttryck i Socialstyrelsens rapport om utredningssystemet BBIC, Barns behov i centrum. Centrala begrepp för studien är socialisation och inklusion och det är även utifrån dessa vår frågeställning utgår ifrån. Undersökningen är gjord med hjälp av en riktad kvalitativ innehållsanalys med ett socialpedagogiskt perspektiv som tolkningsram. I vårt material fann vi två kategorier för inklusion och två för socialisation. Kategorierna för inklusion är Med barnet i fokus, där vikten av barnet som en central del i allt som rör barnet betonas, och Delaktighet, där innehållet tar upp vikten av människors deltagande i barnavårdsärenden och i samhällets olika system.

The aim of this study was to describe and analyze how social workers working in social services using evidence based practice with special focus on the clients? experiences and wishes as source of knowledge in collecting information, assessment and decision. To get to the social workers experiences and descriptions we used a qualitative method with semistructured interviews. The empiric material of the study consists of eight interviews with social workers working in different social offices in different areas, in southern Sweden. The main result of this study was that social workers use clients? experiences and wishes differently in different parts of the investigations.

When using the digital halftone proofing systems, a closer print match can be achieved compared to what earlier couldbe done with the analogue proofing systems. These proofing systems possibilities to produce accurate print match canas well lead to producing bad print matches as several print related parameters can be adjusted manually in the systemby the user. Therefore, more advanced knowledge in graphic arts technology is required by the user of the system.The prepress company Colorcraft AB wishes to control that their color proofs always have the right quality. This projectwas started with the purpose to find a quality control metod for Colorcraft´s digital halftone proofing system(Kodak Approval XP4).Using a software who supports spectral measuring combined with a spectrophotometer and a control bar, a qualitycontrol system was assembled. This system detects variations that lies out of the proofing system´s natural deviation.The prerequisite for this quality control system is that the tolerances are defined with consideration taken to the proofingsystems natural deviations.

Diagnosis means detection and isolation of faults. A model based diagnosis system is built on a mathematical model of the system. The difficulty when constructing the diagnosis system depends om how the model is formulated. In this report, a method is described that rewrites the model on such a form that the construction of the diagnosis algoritm is easy. The model is transformed by two state space transformations and the result will be a system on state space form where one part of the system becomes easy to supervise.

This degree project illustrates newsprint and waterless offset. A new news press was introduced at Drupa-00, Cortina from KBA, which is the first news press dedicated the waterless technique. With actual statistics from the company in question an investigation was made whether their production fits this press. It came out in the investigation that the production of the company, from statistics, fits this press very good. A table was made where different timeschedules were accounted for the new press, with semi- and full automatic plate changing for present and to be added papers.

The purpose of this thesis work was to develop an automatic fault detection system for surveillance of bearing temperature in hydropower turbines. The parameters used except the bearing temperature were cooling water temperature and cooling water flow. A simple static model based on data sampled every minute was developed to estimate the bearing temperature. Then a detector for detection of change in bearing temperature based on the CUSUM-algorithm was designed. Since the amount of data was very small the developed model was too uncertain to be used in a working system.The designed fault detection system showed to work well for the available data.

We have carried out a study of a classification system for the Swedish collection at The Royal Library in Stockholm from 1887. It was printed in 50 copies. The constructor, Bernhard Lundstedt, and his colleagues used it as guidance in lack of a catalogue. We regard it a local classification system. Little research has been done on old classification systems, but Francis Miksa points out the importance of examining them.

This degree project deals with the creation of a business system for Gamersneed Sweden. The system is divided into two parts, one windows appliction and one websolution..

Problem: What are the characteristics of Polykemi?s management control system and how is it affected by growth? Purpose: To describe and analyse the management control system of a medium-sized family-owned company from the perspective of Simons? Levers of control. Research design: An abductive, interview-based case study of Polykemi AB. Conclusion: Polykemi?s management control system is primarily a traditional one which is rather strong in terms of Levers of control.

In January 2005 the emission allowance system was introduced within the European Union and the first period ends at the end of 2007. The system was introduced in order to decrease the wastes of carbon dioxide and the system is a part of ratifying the Kyoto ?protocol which first period runs between 2008-2012.The idea of the system is to reduce the wastes of carbon dioxide where it costs less to do so and the expenses for the society therefore are as diminutive as possible. Different theories explain that companies can benefit from environment legislation and can depending on the company?s attitude gain competitive advantages improve its productivity and thereby increase its profitability.With this in mind, the study aims at examining how the introduction of the emission trade system has influenced Swedish smaller companies in the distant heating industry, with focus on the factors attitude, innovation, competition and profitability.

A power system will inevitably be subjected to transient overvoltages, most often produced by switching operations and lightning strikes. These transient overvoltages may harm sensitive equipment without sufficient protection, but it is not an easy task to predict what transients may occur or how they affect the system. A fault occurred in a low voltage system at Forsmark 2012 and overvoltages from lightning were concluded as the probable cause. The three aims with this thesis are to develop and test a model of the power system at Forsmark 3, analyse the transient behaviour of the system when subjected to lightning surges and identify critical parameters, and lastly to provide a tool for investigating the protection of the system. The modelling and simulations were performed in the freely available simulation program LT Spice.

Systemintegration är arbetet med att få IT-system att samarbeta med varandra. Inomsystemintegration finns det idag ett glapp mellan den tekniska dokumentationen och den tekniskalösningen vilket försvårar arbetet med att ta fram och underhålla integrerade system. För att underlättadetta skapades på uppdrag av Ipendo Systems en databasmodell för att kunna lagra tekniskdokumentation om integrationssystem. Lösningen implementerades i Microsoft SQL Server. Underarbetet utvecklades stöd för hämtning av data från integrationsplattformen BizTalk.