An inflammatory reaction is induced after release of proinflammatory mediators such asinterleukin 1 and 6 and tumour necrosis factor ?. These mediators stimulate the liver tosuppress the syntheses of albumin and endure the syntheses of acute phase protein forinstance C-reactive protein. The aim of this paper was to perform a method validation on animmune turbidimetric assay to quantify C-reactive protein in canine serum at the laboratory atSkara Animals Hospital, Skara, Sweden. The validation involved evaluation of the assaylinearity, precision, stability and recovery.The method was proved to be linear for both TruLab control and Medinor control.

This report describes the design and construction of a prototype that automatically aims a microwave link towards a target. The link, that is located on a mobile aerial mast, is used by Saab Training Systems as a part of an infrastructure network. The report also discusses the development of a GUI that communicates with the control unit by Bluetooth.The control unit, called Pan/Tilt-controller, controls the position of the link by stepping motors. One motor controls the azimuth angle and the other one controls the elevation angle.By a GUI the operator enters the coordinates on its own position and the targets position. Hereafter a bearing is calculated and it will be sent up to the control unit.The control unit will sense its own direction by a magnetic sensor that works as an electronic compass.

Handling materials and packaging, which is the focus of this study, requires efficient logistics, both internally and between companies. To achieve an efficient material flow, good information systems, whose role is to collect, store, process and distribute information, are required. The assumption that packagings are handled in an efficient manner is currently not a matter of course, when many companies do not prioritize the internal management of the package.The purpose of this report was to investigate how medium-sized businesses working with distribution and handling of spare parts packaging can improve their internal management of packaging. In order to answer the purpose, we have used an abductive process and a qualitative data collection. The study had Logistic Center Ljungby (LCL) at Electrolux Laundry Systems (ELS) as a case company and two other respondents, Nibe in Markaryd and Enertech in Ljungby.

This thesis studies the concept of balance in the management control systems (MCS) of a small Swedish company within the IT-sector. The aim is to evaluate the importance of balance and dynamics in MCS and investigate which factors affect them. The frameworks used are Simons (1994) four levers of control, and the five-factor model for balance and dynamics by Mundy (2010). The small IT company - the object of the case study - has grown extensively in the last years and needs to develop more formal MCS without losing efficiency and creativity in their fast-moving industry. The case study reveals that balancing MCS is important also in smaller companies with less formal MCS.

Studiens syfte var att undersöka om det fanns skillnader i personlighet och val av konfliktstil beroende av vilken placering respondenterna hade i syskonskaran samt om Locus of control skiljde sig mellan olika åldersgrupper. Samband mellan chefers konfliktstil och personlighet undersöktes också. De 103 respondenterna som var mellan 25-75 år, 63% män och 37% kvinnor, besvarade en enkät som bestod av demografiska frågoroch arbetsrelaterade frågor om chefskap. Tre test användes; ett personlighetstest, RottersLocus of Control och Thomas-Kihlman?s konfliktstiltest.

AbstractThe purpose with this study was to get knowledge if there are any possible differences in, and correlation between, experienced stress, experienced demands, experienced control and experienced social support in correlation to shiftwork.The study was made at two central hospitals in south of Sweden and had 90 participants (78 women and 12 men) that answered a questionnaire in the current variables. The result in experienced stress showed that there were no differences between shift workers. The results showed a difference between the day- and the nightshift in the correlation between control and stress. The writers speculates that the reason why the nightshift experience high stressvalues with high control can depend on the lack of presence by higher managers, compared with the dayshift. .

In this bachelor thesis, diagnostic methods for one of Siemens stem inlet control valves have been developed. The work has taken place during ten weeks at Siemens Industrial Turbomachinery AB in Finspång. The company produce steam- and gas turbines and also provides service and maintenance. The purpose with this project has been to develop diagnostic methods that oversee the health of the control valves. By using the developed methods you will know when it?s time for maintenance.

Background: Performance measurement as a management control tool has received considerable academic attention. As the number of inter-organisational relationships, such as customer-supplier relationships, increases, there is a new scope for performance measurement as a management control tool. In order for a company to assess the effectiveness of its supplier relationships it has to define, measure and evaluate variables that are critical for the success of the relationship. The role of management control, and thereby of performance measurement, has increasingly been discussed in theory. However, empirical research in this area is still somewhat limited.

The implementation of a material requirements planning system is a complex and demanding task. There has been much research into what factors are important in such implementations, but seemingly very little about the links between critical success factors and management control systems. This thesis attempts, through a case study, to answer the question of how management control systems affect the implementation of an MRP system in ASSA AB, a Swedish manufacturing firm. Data is primarily collected through interviews. Theory regarding implementation success definitions, critical success factors as well as management control systems is presented.

The aim of this Master?s thesis is to study the effects that geographical distance have on the control systems in a scattered organization and how this, ultimately, affects the employees in terms of loyalty and motivation. In order to do this, a case study has been conducted on a multinational travel group and its local branches in Thailand. The study is based on a selected number of theories focusing mainly on control systems in multinational contexts as well as on theories regarding communication and autonomy. The conclusion of the study is that geographical distance has led to a rather large autonomy for the local branches and that the headquarter to a large extent rely more on formal control.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

A degree thesis about quality control and assurance in construction. Made in cooperation with Wästbygg. An analysis was made of the self-monitoring control that is conducted during the construction. The data was collected from interviews from personnel employed by Wäsbygg as either work-leader, project-manager or quality- and environmental-coordinator. During the study there was also a review of the literature in the subject.

Recent years have been very turbulent for most private equity firms. Especially the financial meltdown in global economy has affected the industry, but also the public pressure has made private equity houses change their control strategies towards more conventional methods used in public companies. This thesis aims to put light on the control methods used in listed private equity houses which use a buyout strategy. The paper describes how the control methods change over the different phases the asset experience and how different value generating strategies use altered control methods. Using Merchant's (2003) framework for management control systems and Berg and Gottschalg's (2004) research on value generating strategies in buyouts the thesis shows that action controls as designing instructions for the board and a business plan, together with goal alignment is the commonly used control strategy directly after the acquisition.

In this master thesis, control algoritms using arm side sensors are investigated for an industrial robot. The sensors can be position encoders placed after the gearbox and accelerometers on the robot arms. Control strategies are discussed and evaluated for different models of the robot, after which chosen strategies are applied to a realistic model. Control algoritms using arm side sensors (LQ, dual-loop and PD-PID) are compared to a PID-controller that only uses measurements of motor position for feedback control. The comparison are done with respect to disturbance rejection, oscillation damping, robustness and tracking performance of a reference trajectory.

This thesis investigates how inventory management is practiced at a Swedish sawmill company, how practice differs from theory in this field and how the company could make more use of this theory. To do this we have performed a study on relevant literature and compared our findings with a field study on Moelven Valåsen AB. Our analysis shows that a large gap between theory and practice exists. We identify several reasons to this, including some sector specific problems when calculating cost rate for timber inventories. Suggestions on solutions to these problems and an example of how a cost rate can be estimated with relatively simple means are presented.