At Saab Aerospace in Linköping, components for measurement systems to the fighter aircraft JAS 39 Gripen are developed. In this activity you sometimes want to record the traffic transmitted on the data busses that connects different sys-tems. This traffic on the data busses is using the military standard MIL-STD-1553. This project has aimed to create a system for recording and sending 1553-data. The system is used on an ordinary personal computer, equipped with a recon- figurable I/O card that among others has a programmable logic circuit (FPGA).

This paper is finishing part of the two-year master programme in Industrial Engineering and Management.Initially there was an inquiry of studying the queue-times that Fläkt Woods uses when they break down internal working orders. These times were assumed to be too generalised and does not apply to the actual value of the queue-times which generates incorrect data and delivery delays. During the work of this paper it has been established that it is not the queue-times that is the biggest problem. The problem is the shop floor control and the lack of manufacturing the right products at the right time. Therefore an analysis of the production planning process was made to bring forward the real problems.

 This report is an evaluation of Peab's purchase and call-off system, PIA.PIA is used to order goods for Peab's construction sites. The background to the work is that users of the system have understood the system cumbersome to use when purchasing goods for construction sites. The evaluation was carried out by the interviews and tests with users of the program, in this case, supervisors and site managers at the company. Ten users of the system were interviewed and eleven people have carried out a test order.The focus is primarily on the test order that users have implemented, which has been clocked and analyzed for time and cost. The evaluation is also a user analysis concerning how the users perceive the program, mainly in terms of usability, functionality and benefits.The result of this report shows that PIA is economically profitable to use for the purchase of goods for construction sites.

Syftet med arbetet har varit att undersöka om en viss arkitektur kan användas för att underlätta utvecklingen av ett Back Office-system till ett befintligt och komplext verksamhetssystem.För att gränsa av arbetet och hitta de delar som var intressanta att fokusera på genomfördes intervjuer med tre olika personer som hade olika syn på ett Back Office-system genom sin yrkesroll. Intervjuerna resulterade i ett antal önskemål för vad man ville uppnå med ett Back Office-system.Arbetet resulterade i en arkitektur som kan användas för att underlätta utvecklingen av ett Back Office-system till det befintliga verksamhetssystemet samt till verksamhetssystemet självt. Arkitekturen har utvärderats genom att man först ställde en mängd krav på den och sedan studerade hur den klarade av en mängd nya krav som delvis var relaterade till de gamla kraven.Alla tester som gjorts visar på att arkitekturen är väl designad och lätt att underhålla samt att den kommer underlätta den fortsatta utvecklingen av verksamhetssystemet och dess Back Office-system..

?Development of methods for the planning and implementation of ditch clearing with modern methods?, is a long title for an exam work but that is what this report describes. In Sweden, we have a limited area available, and with the present development with increasing market oil prices, and enormous forces on the renewable energy sources, we need every hectare possible to protect the output of the forests. So with this in mind, many people are now considering how to increase the production of the forests that are already available. A part of production increases is to manage the existing forests, and not to allow this area to go to cultivation or become marshland. We manage our forests in a way that benefits the environment, and we consider that our working practice over the years has shown us to be correct and well functioning. A part of our way of producing forests is to ensure that we have functioning drainage systems in the forest holdings which we administer. The responsible at Holmen Skog requested a good method to make inventories of the drainage systems of Holmen forests. This Degree Project is about ways to identify and implement drainage systems with modern methods. It deals with authorities regulations, and how they operate in different counties.

Dagens samhälle är ett informations- och kunskapssamhälle där kunskap och kompetens är nyckeln till företags framgång. En förändring har skett i näringslivet då de tillverkande företagen har blivit allt färre och de kunskapsbaserade företagen har ökat. För att kunna överleva i det nya samhället måste ledning och anställda i ett kunskapsbaserat företag ständigt utveckla sina kunskaper, sitt humankapital. Humankapitalet är den mest värdefulla tillgången i ett kunskapsbaserat företag då företaget är beroende av de anställdas kompetens och kreativitet. Därför är det viktigt att dessa företag tar tillvara på och förädlar sitt humankapital.

The purpose of this Masters thesis is to compare the scheme structure of two national classifications system, namely the Swedish SAB system and the German ASB. It has been assumed that there are no major differences between the two models of classification systems or the main classes into which documents are placed. The classification theory and subject analysis, which form the basic theory on which my research is based, are taken from Dahlberg, Langridge and Rowley. A comparison of 30 monographs classified in the SAB system Sveriges allmänna biblioteksförening and in the German ASB system Allgemeine Systematik für öffentliche Bibliotheken showed that the classification structure was primarily responsible for determining where a particular document was placed. However, despite the fact that the subject in various documents may be similar, my research will demonstrate that the structure of the two codes also depends on different interpretations of the main subject in a document.

This work is an experimental study where knock sensor placements are investigated using engine tests. The aim is to studythe quality of the signal from knock sensors and how the signal for engine control is affected at different sensor locations on Scanias, engine DC13. To find out at witch position on the engine youcan get a usable signal for engine control, the engine is running while the knock sensors with advanced measurement equipment is connected to the engine. Evaluation of signals from the knock sensors are made in the computer program Matlab. The program is producing a seriesof plots, from these plots it is visually possible to draw conclusions and find connections.

Heavy duty vehicles often have problems with traction during the winter periods. For vehicles that can lift tag axles it is possible to increase the normal force on the driven axle by lifting one or more tag axles, this will then increase the propulsive force of friction. This however increases wear on both road and vehicle. A possibility to reduce the wear while achieving nearly equivalent traction compared to lifted tag axles is to allow the vehicle to regulate the normal force by lowering the pressure in the air suspension associated with the tag axles or by the lifting of these axles. The vehicle would then by itself be able to set just the right amount of normal force on the drive wheels to avoid unnecessarily high normal forces while maintaining sufficient traction.The purpose of the report is to find out which parameters affect heavy duty vehicles when driving on slippery slopes and how traction can be improved.

The purpose of this essay was to compare the Swedish and the Japanese pension system and see if there were any big differences or similarities. I was looking for answers to such questions as if the systems were modelled with the problematic demographic situation in mind and also how these two countries had tried to manage the problems. Path dependency was also a central conception when I studied the reforms of the two pension systems. I mainly used literature and Internet sources in my study. There were many books on the Swedish pension system and the debates that had been going on since the 80's.

SummaryBackground: Management control is important for all kinds of activities, both in trade and industry and in the public sector since you must economize on scarce resources. There are nevertheless many different views on management control, which have changed with the times. With regard to the public sector in Sweden, the management control systems have changed radically the last half century, especially from the 1980s, due to depressions and increased focus on effectiveness. New approaches have been taken by many municipalities and county councils, both in Sweden and internationally, where the former management control systems have been abandoned in favour of result control, target costing, and activity-based-costing, for example. Another new approach has been the Balanced Scorecard, which was introduced by Kaplan & Norton in a pioneering article in 1992.The Balanced scorecard is a multidimensional tool, originally intended to be used in trade and industry, but with regard to its nature, it has been adopted even by many non-commercial organizations, especially in Sweden.

Previous research in the area of leadership and stress has shown that the leader plays an important role but in what way is still an issue to explore. A qualitative approach was used in this study to develop an increased understanding of the leader's experience of stress using four themes; leadership, stress, control and organizational factors. A total of 12 semi-structured and un-structured interviews were carried out with 6 leaders, three females and three males. The data was transcribed and thematic as well as narrative analysis was conducted.The results indicates that leadership stress is caused by a lack of control and that factors intrinsic to the role as a leader both facilitates and complicates the leaders situation when facing stress..

In this Thesis the possibilities of designing a larger building that is very energy efficient in the sense that it would not need a conventional heating system are discussed. Solar radiation transmitted through the windows, internal heat from occupants, lamps and electric appliances inside the building and heat recovered from the ventilation system then have to be sufficient for the heating of the building. This study is of general interest since the property company, Akademiska Hus, plans to use this study as a first step in determining if this technique could be used in the future and thus be worth further investments. A building without a conventional heating system of the size investigated in this project has not yet been built.The energy needed for the heating of the building was simulated using VIP+.The conclusions from the study are that it is possible to build large buildings without any conventional heating system. This could be achieved in many different ways, for example by lowering the inside temperature or by using better windows and heat recovery system with higher efficiency.

The report is the result of a master thesis at ENEA AB during the fall of 2009. Itaims to create a specification of flash memory management system which focuseson power efficiency and low RAM usage for embedded systems, and to design andimplement a prototype of such a system to facilitate further development toward thecreated specification. The system used by ENEA today is a Flash Translation Layer(FTL). It has a complex structure which prohibits modifications and customization,therefore a new flash memory management system needs to be developed.The suggested solution uses a translation layer called Metadata FTL (MFTL), wherefile system metadata and userdata are separated from each other in order to improveperformance. The partition holding userdata uses a block-level mapped translationlayer system called Fully Associative Sector Translation FTL.

The purpose of this paper is to make an analysis of the urban Roman water system. I have chosen to work with the system as a general field, not as a case study of a single town. In my opinion such a study would not give a proper and fair view of the subject. Therefore, this paper will discuss the different parts of the system, each one for itself and name examples wherever possible, to give a wide survey of the reality of the Roman water supply system. The aim is to give the reader a clear picture of different solutions used in the time of the early Roman Empire and a good understanding of the subject..