The aim of this paper is to describe the position of the Swedish welfare state within the shaping of a Swedish national identity. This is done through the study of Mångkulturåret 2006, and its rhetorical context. The point of departure is that history is formed continuously in current speech and a text analytical method has been used. Mångkulturåret was issued by the Department of Culture as an extended perspective of Cultural politics. The rhetoric used in the official document Agenda för Mångkultur is analyzed through a comparison with earlier official documents on the field of multiculturalism and integration.

The process of economic globalization has in recent decades increased the power of multinational corporations. In recognition of their powerful position, corporations have begun to adopt Corporate Social Responsibility as a way of managing their social impact. Their interaction with the surrounding society reaches a peak when involved in large-scale projects, such as the Three Gorges Dam in China and the Narmada Valley Development Project in India. This essay analyses the concept of Corporate Social Responsibility in a comparative study between the two cases. By using current research, it focuses on the role of civil society for making Corporate Social Responsibility effective in developing countries.

This essay seeks to explore which country´s laws should be applied when a dispute concerning damages in non-contractual obligations arises från illegal copying. In Europe today we have merely a few documented laws regarding choice of law concerning illegal copying. Thus, a proposition regarding a regulation which shall control the choice of laws applied on disputes in non-contractual obligations has been prepared. Another main reason for the existence of such a regulation is the need for a united set of laws to enable recognition of other countries´ judgments in Europe. This proposal will be called the Rome II-regulation.

Fokus i den här uppsatsen ligger på samverkan mellan tre offentliga utvecklingsaktörer i Skåne; Region Skåne, Länsstyrelsen Skåne och kommunerna. En god samverkan dessa aktörer emellan anses generellt vara viktigt, och något av en grundläggande aspekt, för att den hållbara stadsutvecklingen i Skåne ska ledas i rätt riktning. Det teoretiska ramverk som används i uppsatsen målar upp en bild av hur samverkansprocesser kan te sig i verkligheten, samt belyser hur problem och utmaningar kan tacklas. Ramverket består av främst governance och collaborative planning ? två teorier som är relevanta för både samverkan och hållbar stadsutveckling.

Målsättningen med uppsatsen har varit att åskådliggöra beslutsprocesserna på främst strategisk ochmilitärstrategisk nivå inför det svenska beslutet att delta i de militära FN-missionerna i Suez 1956,Kongo 1960 och på Cypern 1964. Men också att studera deployeringen vid den inledande insatsen.Uppsatsen har därmed syftat till att finna svar på varför det gick relativt fort att fatta beslut om insatssamt deployera förbanden ? svar som kanske kan lära oss något inför framtida liknande beslut ? tillexempel med EU Battle Group. Graham Allison?s teorier om Organizational Process ochGovernmental Politics har utgjort den vetenskapliga ramen för att hjälpa till att förklarabeslutsprocesserna.

The aim of this essay is to describe the historical development of the intercultural teacher training program at Södertörn University in Stockholm. I have also examined how the intercultural teacher training program was started, how and why it became intercultural and how the people in charge of the development of the teacher training program discussed intercultural science. The teacher training program has been an active part of Södertörn University since 1998, but it became intercultural in 2002. I have studied these questions through documents from the Södertörn University archives and literature by the funders of the education. The study shows that the university profile, ambitions and motives have been a key factor in the decision to make the teacher training program at Södertörn a multi-cultural one..

With the advance of the modern information society, the importance of reliable identity authentication has increased dramatically. Using biometrics as a means for verifying the identity of a person increases both the security and the convenience of the systems. By using yourself to verify your identity such risks as lost keys and misplaced passwords are removed and by virtue of this, convenience is also increased. The most mature and well-developed biometric technique is fingerprint recognition. Fingerprints are unique for each individual and they do not change over time, which is very desirable in this application.

This thesis serves to examine how manufacturing SMEs consider outsourcing. Furthermore, we aim to identify the main characteristics and patterns for these types of companies that can explain their rationale in such a decision. The chosen method for this thesis is abduction and selected research approach is multiple case studies. Seven case studies have been conducted at EAB AB, Esbe AB, Hörle Automatic AB, Pelly Industri AB, SGV Industrier AB, Swede-Wheel AB and Wulkan AB. Our findings have illustrated that although traditional outsourcing theory provides a good platform for explaining the rationale behind outsourcing decisions in SMEs, we have identified additional considerations that SMEs, operating as 2, 3 or 4-tier suppliers towards OEM-corporations, make.

Stockholms vattenskärning AB in Kungsängen has through the acquisition of a company begun to design and produce aircraft heaters whose origin is early 1970s which follows a high inefficiency in terms of energy consumption and size.The aircraft heater, which is sold worldwide, serves its purpose for customer satisfaction and has done so ever since it was developed in the 70s.Stockholms vattenskärning AB is now investigating the possibility in making the aircraft heaters more efficient, both in terms of energy consumption but also on a more efficient design with the belief that it would lead them to an edge in the market. The aircraft heater consists of several main components whose function altogether is to keep passenger aircrafts warm while they are on the ground.This project has been limited to the further development of the heat exchanger package which accounts for the conversion of the hot medium to the fresh air being carried in to the aircraft cabin. Work has been divided into different phases in order to create a better understanding of the project range and to make it easier to divide the various elements in the time available, 10 weeks. These phases are literature review, situation analysis, concept generation, CAD, concept comparison and writing reports.After the initial literature review was made, a fundamental theory was written which is essential in understanding the remaining parts of the project.With the theoretical part as support, measurements and calculations were made on the current heat exchange package in a situation analysis to ensure its operation and efficiency.In the concept generation phase, the collected facts from the literature review was used as the basis for creating a matrix. The purpose of the matrix was to indicate the two most suitable types of heat exchangers to develop four new concepts out of.In the CAD phase the four concepts was drawn up and then described with text and images.The last phase is the concept comparison where a concept selection matrix is used to function as a decision basis for further production at Stockholms vattenskärning AB. The four concepts have been developed based on the current heat exchanger and is gradually changed into a design of a cross-flow heat exchanger constructed out of stainless sections. The purpose of this is to have gradual upgrading of the heat exchanger as an option, in order not to saturate the market..

The purpose of this thesis is to analyze the regulatory power, efficiency and impact of export control on Swedish arms export from the 1980s onwards, linked to the delegation of authority of permit license to the Inspectorate of Strategic Products in 1997. An increase in the administrative sector, based on a collective decision making process and established criteria and guidelines, aimed to strengthen the control of arms export to non-democratic and problematic states. In short, the aim of the study is to investigate and analyze whether there was a decrease in the arms export to problematic states or not. On one hand, it is reasonable to assume that the introduction of the new regulation entailed a more strict arms export policy. However, previous research has showed that regulations are sometimes not effective since incentives to breach these may be present.The study begins by examining the Swedish case and situation in terms of arms manufacturing and export, as well as the delegation of authority and legislation applied to the field over time.

Sammanfattning Titel: Återuppbyggnad av strukturer efter en kris Författare: Lisa Mattsson, Emma Lindmar Handledare: Camilla Wernersson Institution: Managementhögskolan, Blekinge Tekniska Högskola Kurs: Kandidatarbete i Företagsekonomi, 10 poäng Syfte: Syftet med denna uppsats är att ur ett meningsskapande perspektiv bidra till en ökad kunskap och förståelse om hur interaktioner mellan människor i en organisation kan återuppbygga strukturer efter en kris. Metod: För att nå vårt syfte har vi valt att arbeta med kvalitativa metoder. Vi har genomfört en gruppintervju med personal från hemtjänsten i Kronobergs län, vars strukturer rasade samman under stormen Gudrun. Vi undersökte hur de efteråt återuppbyggde strukturerna genom att analysera olika teman ur empirin. Slutsatser: Osäkerhet, samhörighet, roller, beslutsfattande och rationalitet, är teman som alla är länkade till varandra, till strukturåteruppbyggande och till meningsskapande.

Agencies towards Sustainable Development ? A Study of Environmental Management Systems in Governmental Agencies 2005A vision of the Swedish government is to build an ecologically sustainable society. A tool in this effort is to implement environmental management systems (EMS). The aim of the thesis is to present in which phase of the implementation of EMS Swedish governmental agencies are. This will be done by compilation and evaluation of agencies? yearly environmental reports.The thesis is written in co-operation with the Swedish Environmental Protection Agency (Swedish EPA).

What drove me to write this paper is the will to  examine if there is a philosophically and scientifically viable  alternative foundation for an objective morality other than what we like to refer to as "God". The  American philosopher and neuroscientist Sam Harris presents in his book The Moral Landscape a thesis for an objective morality based on science in which he states that  science can determine human values. The purpose of this paper is to perform a theoretical trial of The Moral Landscape, examining Harris' thesis and it's relations to the philosophical obstacles that stands in its way, these being mainly the famous philosophical principle "Hume's Law" and G.E. Moore's "Naturalistic Fallacy and Open Question Argument" and thus will serve as my main theoretical foundation. The results of my study was not conclusive since Harris in fact doesn't succeed in bridging the gap between facts and values on a scientific ground.

On-site sewage systems are common on the countryside of Sweden with approximately one million on-site systems installed. Due to insufficient function, these contribute significantly to the total discharge of phosphorus to rivers and lakes, causing eutrophication. In order to reduce eutrophication and to fulfil one of the environmental quality objectives, the decision was taken by the Swedish Government in 2005 that 60 % of phosphorous in sewage sludge is to be recycled to arable land before 2015. To make recycling a reality, new solutions have to be found. Federation of Swedish Farmers (LRF) takes an active interest in this issue and has initiated this study. One problem is that the food industry is sceptical towards recirculation due to the risks that products from sewage systems may contain pathogens, heavy metals and unwanted chemical compounds, e.g.

SummaryI have a great interest in bouzoukis and since I, during my education in guitar making, mainly have focused on building bouzoukis and other traditional folk instruments, I have chosen the bouzouki as the object of my degree project.In connection to the making of these instruments, I started to consider the construction of the bouzouki and why the bouzouki has such a characteristic sound.One of my theories is based on the fact that most bouzoukis are made with floating bridges instead of glued pinbridges. Do these types of bridges differ from each other tonally and if so, how much and in what way?To receive answers to my questions, I have built two identical bouzoukis with different types of bridges, one with a glued pinbridge and one with a floating bridge. I have been very precise in the making of these instruments, giving them the exact same dimensions and using material from the same piece of wood. This to make sure that the instruments should be as exactly alike as possible.After finishing the making of the bouzoukis, I arranged for a sound test where I let musicians play and listen to the instruments.