Background ? The last 20 years healthcare has been facing increased demands on efficiency and increased customer satisfaction. This despite reduced resources and increasing demand. These demands are presents in all departments within healthcare organisations, including medical laboratories that currently receive an ever-increasing number of remittances. Laboratory flows are quickly becoming overloaded with samples and related materials.

På EU:s inre marknad ska fri rörlighet råda. Trots det tvekar konsumenter inför att handla över gränserna. Många konsumenter känner en osäkerhet inför andra länders lagar och oroas över att skyddet mot ohederliga näringsidkare inte är det samma som i deras eget land. Denna osäkerhet undergräver den inre marknaden. För att motverka denna osäkerhet har EU antagit direktiv 2005/29/EG om otillbörliga affärsmetoder.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

The aim of this study is to analyze how intercommunication between offenders are presented with artefacts during the planning and implementation of a robbery in a cash depot in Stockholm. The methodological approach is based on empiricism from police investigation protocols, which leads this study to a case study. The ambition is to analyze the empirical material from a sociocultural perspective. The results shows that the offenders use artefacts to plan the crime with artefacts within an internal intercommunication between the offenders. After the planning artefacts such as a helicopter, explosive material, telephones, saws and ladders have been used in an intercommunication to implement the robbery which leads to an analysis that hierarchy depends on the role of the artefacts, only when technical artefacts are included in the term of hierarchy..

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

As the companies of today are good at protecting themselves against external threats, but are having problems with internal threats, we focused on how information can be protected from ending up in the wrong hands. First and foremost to protect information from employees who might steal it and sell it to another company. Since the security investments needed are connected to the financial costs of implementing them we have tried to create a balance between the investments needed and the cost of implementing them. The different kinds of protection needed are first and foremost protection to make data less accessable, passwords and traceability. While it is hard for us to estimate the amount of money a company lose by the hour when the production stands still, we have not been able to use any of the excising models to calculate the profit of installing countermeasures.

This thesis describes an optimising compiler for translating from SMV to CLP(B). The optimisation is aimed at reducing the number of required variables in order to decrease the size of the resulting BDDs. Also a partitioning of the transition relation is performed. The compiler uses an internal representation of a FSM that is built up from the SMV description. A number of rewrite steps are performed on the problem description such as encoding to a Boolean domain and performing the optimisations.

A flat organisation makes a horizontal career development possible, which means that it is more important to develop an individual?s knowledge base than to gain a higher title. This leads to a personal development, which motivates expats to stay. Since the responsibility of the career development mostly lies on expats themselves, companies should create conditions that make individual, internal job search possible. Like in IKEA:s case, it can be done through a strong and prestige less company culture, that penetrates the whole company.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

From an early age kids learn that their good performance and efforts will be rewarded. Unfortunately, not all leaders in the media industry are rewarded or given the same opportunities to exercise their communicative leadership, according to studies in media research. The aim of our study is to highlight female managers' experiences of their communicative leadership in the Swe-dish media industry. This study was based on qualitative interviews with four female respondents in management positions. The core of the study concerns female communicative leadership and interpersonal communication.

Modeling and simulation is growing ever more important in the development of new products. This thesis describes the use of Hopsan for hydraulic modeling and its use in conjunction with Simulink with the intent of using the model in a hardware-in-the-loop setup. A sensor layer has been created in Simulink to emulate all the internal sensors in a modern forklift. The details of using legacy C-code instead of a hardware MCU for a fully simulated environment, software-in-the-loop has been outlined. There are two major routes one can follow implementing software-in-the-loop, exporting the C-functions to CAPL via a export layer or creating an s-function in Simulink.

The purpose with our thesis is to understand and explain the advantages and disadvantages there is with the self scanning system. The advantages and disadvantages we will highlight from three different angels; the store management perspective, the staff perspective and the customer perspective. These three perspectives will together form an overall perspective over the advantages and disadvantages as the self scanning system has contributed with. Finally we will highlight the differences and resemblances we have found between the perspectives.Through a qualitative approach we have gathered data to our thesis. Furthermore we have based our theory chapter and our empirical chapter on the base of Grounded Theory.

The Swedish winters 2009/10 and 2010/11 were rich in snow and many roofs collapsed, mainly largespan frames. Investigations were made and the amount of snow was not the primary cause, insteadthere were several other causes. One of these was that in some cases roofs were shoveled in anunfavorable manner which affected the load patterns negatively, so causing the roofs to collapse.Most people lack the knowledge of how shoveling will affect the roof. Had there been an increasedunderstanding regarding shoveling, some roofs could have been prevented from collapsing.Through both qualitative and quantitative research in the form of interviews and calculations thetheoretically best ways to shovel a selection of roof types is presented in the report. The roofstructures covered are 3-compartment, continuous and Gerberspliced metal roof decks.

In order to rescue a distressed submarine crew, the Swedish Navy is able to use a deep submergence rescue vehicle, DSRV. This mini submarine ascends, docks to the downed submarine and picks up the whole crew. The submarine rescue ship HMS Belos has a special crane located in the aft of the ship to lift the surfaced DSRV aboard, which then docks on to the on board pressure chambers located below deck. During inspections the aforementioned crane has shown to have problems with cracks in the structure, most of them located in the bolted joint between the top part of the crane and the two leg parts. A simulation of the forces acting on the structure in heavy sea condition was conducted; these values were then used as input values in a Finite Element Method, FEM, analysis of the joint.

The concept of sustainable development has been pervasive in recent years and many organizations choose to implement sustainability and adapt their activities accordingly. The purpose of this study have been to explore how a collaboration on the use of waste materials may look to analyze what influences cooperation. A case study has been carried out examining a Swedish state regional project aimed at creating partnerships between actors and utilizing textile waste with the help of design. The study was conducted using qualitative methods and the collection of data has been done through interviews and by examining documents. The results show that there are seven key factors that affect cooperation: expectations, commitment, internal communication, a strong non-profit actor, individual treatment, personal networks and the diversity of actors.