Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

In this report an MCNP (Monte Carlo N-Particle) model is described for the reactor vessel at Ringhals 2. The model is validated against the specific activity in neutron dosimeters, extracted in 1977, 1984 and 1994. The validation showed that the calculations of the model are within the requirements of a maximum of 20 percent uncertainty for every neutron dosimeter except one, extracted after the first cycle. The uncertainty of this cycle was mostly due to the operation data rather than to the MCNP model.The model has been used to investigate various questions concerning radiation damage. The reliability of the traditional measure of radiation damage, fast neutron flux (En > 1MeV) has been evaluated.  This has been done by taking the ratio for this and another measure of radiation damage, DPA (Displacement Per Atom), for various positions and layers.

Syftet med denna studie var att identifiera problem och behov som byggare i Sverige stöter på i sin vardag samt anordna en workshop där produktutveckling utifrån dessa behov diskuteras, samt hur denna information kan användas i produktutvecklingen. Studien grundar sig i teorier om innovation, behov och kvalitet, behovsidentifiering, innovationsspridning, produktlivscykel och metoden NABC: Need, Approach, Benefit, Competition. Grunden till arbetet är en föreställning att produktanvändare har behov som dem själva inte är medveten om. Genom att utgå från dessa omedvetna behov kan en bättre produkt utformas. Empatisk design (deltagande observation) användes för att kunna upptäcka outtalade behov samt skapa en god förståelse för byggarnas naturliga arbetsmiljö.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

AbstractValue Added Tax, VAT, is a general consumption tax that is added to almost all consumption of goods and services. Despite the extensive work of harmonization of the VAT system relating to electronic services, it can be difficulties in determining the taxable land, something that could affect the internal market in a negative way. The Swedish companyStardollABwas double taxed on certain electronic services that they provided consumers in theUK. The problems that lead to double taxation must be identified to ensure free competition and free movement within the internal market. The principle of neutrality pervades the whole of the EU VAT system which can be derived from principles of the Treaty, establishing the common market, and the introduction of the VAT Directive.

Title: Management control of facility efficiency in municipalities - A case study of Halmstad municipalityLevel: BachelorSeminar date: 2012-05-31Authors: Markus Nilsson & Sara MattssonAdvisor: Sven-Ola CarlssonKey words: Control management in municipality, facility efficiency, management by objectives, internal rents and incentivesBackground: The public sector owns and manages a large property portfolio and in the municipalities, the properties are always a big cost item. Because of the outside world changes and the public interest, the properties should be used as efficiently as possible.Purpose: The purpose of this paper is to describe how control management of facilities looks like a municipality. The paper also seeks to explain how employees work to make the facilities more efficient in a municipality.Methodology: The authors use a qualitative method with open interviews.Theoretical perspectives: The choice of theory was made with the field of management control and facility efficiency in mind. The theory therefore includes management by objectives, internal rents and reward systems, motivation and communication within organizations.Empirical foundation: The organization has undergone a reorganization 2010/2011. There are no clear incentives to reduce facility costs.

Social medias impact recent years has been huge and an increasing number of companies have started using the services. The benefits for companies to be available thru social media are many and the costs are low. Social media makes it easier for companies to get in touch with their customers and at the same time they reach out to a lot of people since the number of frequent user?s constantly increase. A major part of the information that is available is seen from a company?s perspective and what benefits they can take advantage of thru social media.

This thesis tries to explore how different strategies of internal communication are used in actual situations within an organization. Specifically, the purpose is to investigate how the internal communication within the Swedish University of Agricultural Sciences (SLU) has been carried out during their work to change their organizational structure, and, how this can be understood in terms of existing theories for strategic communication. The research questions explored are:What are the chosen strategies used to communicate the changes internally?How can these strategies be understood in terms of existing theories?What are the views of the employees on the communication and what are the relations between their views, the chosen strategies and existing theories?The theoretical ground work chosen is mainly the work by Cornelissen (2008), Dalfelt (2005), Johansson (2011) and Larsson (2008). The method chosen for the empirical part of the study is semi-structured qualitative interviews.

The first version of the Swedish Code of Corporate Governance was published year 2004, by the code group, Kollegiet, after a mission from the Swedish government. The Code consists a collection of rules and standards about corporate governance and internal control, and the first version was intended to include incorporated limited companies on Stockholm?s alpha stocks, and also listed companies with a stock market value over three thousand million Swedish kronor. Now a few years have passed, and in July 2008 a new, revised version of the Code was implemented, now simplified and shorted, with the intention to include all joint-stock companies in Sweden. The Code contains rules about for example ownership, management commitments, annual stockholders meetings, and the accountant. This study intends to, with a qualitative research approach and an inductive reasoning, through studies of empirics in the subject, review whether the accountant?s profession has been influenced by the Code.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Background: The need for structured practice has in recent years appeared in connection with the request for a more evidence-based nursing. In psychiatric care with its complex disabilities, it is important to have methods to identify these. Research has demonstrated the importance of patient participation in nursing that has been shown to affect their mental health. It is essential to get to know how patients with mental illness are capable of involvement in their life situation. The ICF emerged as a useful theoretical framework for development of questionnaires of patient participation.Aim: The aim of the present pilotstudy was to develop and test a questionnaire for participation, based on ICF.

Internet and social networks have become important features in today?s society. We spend numerous hours on browsing and communicating through these platforms. This development has also led to a shift of power from businesses to consumers. Today?s consumers have more control of if, when and what messages they are exposed to.

Competition is keen in the fashion industry of today. Homogenous products and prices aredriving competition and most firms are struggling hard to attract customers. Brands havebecome one of the most important assets for success and are often critical for the choices of theconsumers. A strong brand is often considered as a substantial value in the eyes of the consumerand gives the individual firm a competitive advantage in the marketplace. To build a strongbrand it takes that the brand identity not is in conflict with the brand image of a firm or a product.Sometimes one of these conflicts exit and sometimes the firms are not even aware of it.In this thesis we study how two firms, Lindex and Prada, perceive their own image and then wecompare how the images of the firms are perceived by the customers.

More than 90 % of all business activity in the world market consists of small and midsized companies today. Recent studies have shown that there has been an increase in small companies? certification to ISO's management standards. Smaller organizations tend to have more limited amounts of resources at their disposal than larger ones. This can result in difficulties during the implementation process of ISO 9001.