This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This study describes what impact activity within Wifstas, Matfors,Grönstas and Nolbys water protection areas have on the quality of the drinkingwater. It considers the use of the area, environmentally dangerous activitiesin the past and present, the geology?s part, what harm hydroelectric power damsmay cause if they break and how climate change might affect the area in thefuture. It also takes into consideration activities outside the waterprotection areas which might have a suspected impact on the water quality. Theresults of the study are that pollution from infrastructure such as roads, orwastewater from treatment plants may cause occasional contamination of thedrinking water, foremost due to flooding.

Stroke is caused by a bleeding or infarct in the brain and is one of the most common diseases in Sweden today. The purpose of the study was to evaluate if Ronnie Gardiner?s Rhythm Therapy (RGR-therapy) has any effect, regarding motor control and the subjective experienced health related quality of life, on people who have been affected by stroke. The examination group consisted of eight people. The intervention consisted of RGR-therapy once a week during a period of nine weeks.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

Sahlgrenska Academyat University of GothenburgDepartment of Internal Medicine and Clinical NutritionAbstractTitle: Vitamin D supplementation and its effect on body composition in the overweightand obese ? a systematic reviewAuthor: Johanna Blum and Emma Sellin FrimodigSupervisor: Sofia KlingbergExaminer: Ingrid LarssonProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: April 10, 2013Background: There is an increasing burden of overweight and obesity worldwide. Theconditions lead to morbidity and lowered quality of life. Since there is research showing aconnection between obesity and low levels of serum 25(OH)D, this raises the question ifsupplementation of vitamin D may have positive effects on body weight, waist circumference andbody composition in the overweight and obese.Objective: To investigate if there is enough scientific evidence to recommend vitamin Dsupplementation combined with nutrition therapy to overweight and obese patients.Search strategy: The systematic collection of data was performed in the databases PubMed andScopus. Search terms included were ?vitamin D supplementation?, ?obesity? ?cohort?, ?vitamin D?,?vitamin D3 supplementation? and ?overweight?.Selection criteria: Human studies with RCT, CCT or cohort design written in English orSwedish were included.

The purpose of this thesis is to compare if a charter company's attitude and vision of service can be reconciled with the attitudes and visions that the customers have in the same area. In order to carry out the study a qualitative approach is used. The data has been collected by interviews, focus groups and observations. The framework is theories on the subject of customer satisfaction, quality of service at customer meetings, Self-Service technologies, quality assurance and gap in service.The study has concluded that the approach to service is relatively equal between the company and customers, but the future visions differ. Focus group participants have been thinking bigger and further into the future, while the company focuses more on specific functions.

There are problems with poor quality, poor scheduling and poor working climate in the Swedish construction industry. Many parts have been involved, trying to solve the problem.This spring a new planning and building-law becomes final. In this law, the requirements set on the controls are greater. Hopefully this will lead to fewer construction errors. The requirements set on the working environment have also increased, forcing consultants and contractors to focus on safe workplaces.For each project requiring a building permit, an inspection plan has to been drawn.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This Masters thesis concerns feature film services in Swedish public libraries. We have investigated the opinion of eight librarians concerning values and criteria for selection as regards film. The theory chosen comes from varied disciplines, for example sociology, adapted to our subject. The most important theories are Antonio Gramscis idea of hegemony, Herbert J. Gans concept of taste cultures and Carl Gustav Johannsens discussion about quality.

Introduction: The health for individuals with intellectual disabilities is asubject that is prioritized by the Swedish Institute for Public Health. Socialsupport has been proven to be important for health and quality of life. Despitethis fact there is no research available regarding the influence social support hason health and quality of life for people with intellectual disabilities in Sweden.Aim: To describe social support and the consequence of social support forhealth and quality of life for individuals with intellectual disabilities. Method:A litterature review of research in a defined area with a descriptive design.Systematic searches for articles were done in several databases and ultimately16 articles were chosen. Themes and categories were created with respect to theaim of this study during the analysis of the articles.

The purpose of this study was to illustrate a parental perspective of children´s participation and quality of live through personal assistance. Important aspects of parents' experiences were highlighted based on how they experienced participation and quality of life for their children. We chose to use a qualitative approach in the form of four individual interviews with parents from different municipalities in central Sweden. The study was conducted with a narrative approach in which we used a holistic perspective. Parents' experiences were highlighted over time to create a complete picture.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.